I am trying to create a code so that when the save button is hit, it puts the current date and time into a given cell before it saves. This way I will know the last time something was updated and saved.
View 9 RepliesI have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedSee the attachment. When the macro runs. The workbook is saved in a folder with a new serial number. That is fine but I need to debugging the code. Since I need to save the WB name with the time and date to be also picked and named when saving. Refer to cell B1.
View 9 Replies View RelatedIs it possible to use a macro like the one below, and have the second location save with the date / time stamp in the name? This is what I need to accomplish: I have a few folks that need to make changes to a master spreadsheet daily. The spreadsheet is in a Network share that when modified and saved, will save to that network share, but also locally. Can the second location have the date/time stamp added to the name of the file so that I know when the changes were made and have an audit trail ? This will also keep a copy of the last modified file in case the spreadsheet is corrupted. Here is what I have for saving to 2 locations:
View 3 Replies View RelatedIs there a way to automate the date and time in one cell upon saving? I have seen some posts elsewhere upon this subject, but here is the twist:
this is a shared workbook with each tab allocated for a different person. Each person needs to update their worksheet and have the date and time update upon saving. The date and time would appear in the same cell for each sheet. I am fairly certain that this cannot be done with an Excel formula, so I would appreciate if anybody had any VBA suggestions. (I am just starting to learn VBA
I've been looking for an easy way to add time to a cell that has a time or date and time in it, for example, 5/31/2007 12:06:27 PM
I want to add 30 minutes to it, for example, without having to split it apart and manually add it in, worrying about adding an hour if I go over 60 minutes, etc.
If I was doing it with a cell formula, I could use "=A1 + TIME(0,30,00)" but I don't know what the equivalent would be in VBA.
I'm trying to set up a template running loads of formulas. One of the aspects I want is that a specific field refreshes with the current date, but always reverts to 10:00:00 (10AM) as the time.
View 4 Replies View RelatedI would like to have the current time/date automatically entered into B1 when A1>0 and I want it to be non volitile, is this possible?
View 9 Replies View RelatedI'm trying to save a file with current date and time...I used the code from the following thread:
Save File Name With Date/time Stamp
ActiveWorkbook.SaveAs Filename:="C:FinalOutput.xls " & _
format(Now(), "mm_dd_yyyy hh mm AMPM"), FileFormat:=xlNormal, Password:="", _
WriteResPassword:="", ReadOnlyRecommended:=False, CreateBackup:=False
Now when I try to run the macro, it gives me an error saying: Compile Error, Wrong number of arguments or invalid property assignment. And it highlights "format" in yellow.
I have a spreadsheet that contains a list of names/numbers/dates and I have to manually go through the list each day highlighting the row if it contains a date that is more than 48 hours old. How to accomplish this in a macro? Example:
Name.......Phone Number:......Ticket Number......Date Added
xxxx........555-555-5555...........5555555............2/12/12
xxxx........444-444-4444...........4444444............2/15/12
xxxx........123-456-7890...........1234567............2/10/12
That is the layout of the spreadsheet so I would have to manually highlight rows 2 and 4 because the date in Column D is greater than 48 hours ago. The range is A1:D25 and the cells are changed/updated daily.
On opening of an excel document is it possible to have a date in a cell that will continuously update. =now() enters the date required but if i was to go into the sheet days or whatever later is there a way that this will update automatically??
View 3 Replies View RelatedI am running excel 2003. I am creating a book that needs date & time input on every row. I am trying to input this automatically based on adjacent cell being >0. Every time there is a new input, the previous dates / times update to the latest one.
View 5 Replies View RelatedTrying to create a macro that will add the date & time & initials (i.e 8/26/09 2:34 PM JOD) into the current cell.
I've found plenty of macro's that will do this but it ends up deleting any existing text within the cell. I need to be able to add it in the middle of a text string.
I am trying to get excel to auto populate the current date and time each time I make an entry, however, each time i make an additional entry the current date and time populates but it changes all the prior entry's with that current date and time.I am trying to keep a log of all the times I make a new entry. Correct formula that will work?
View 9 Replies View RelatedI am trying to write a formula that will have the cell display todays date if it is after 2:00PM, and if it is before 2:00PM I need the cell to display Today()-1. I have tried several iterations and I'm stumped.
View 5 Replies View RelatedI would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedI needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
I am looking to have a macro which will automatically add the username and date to a cell, when the cell above changes (or in this case =x). I have a bit of code from a previous project, but I have changed Target.Row to Target.Column and it is not behaving as I require:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Range("B2:BZ2"), Target) Is Nothing Then
Range("C" & Target.Column).Value = Format(Date, "dd-mmm") & " " & Format(Time, "hh:mm") & " by " & (Application.UserName)
End If
End Sub
See the attachment for the example. What I need is whenever row 3 ="x" I need the corresponding cell in row "d" to update with the latest date, time and username. Please not the macro is currently not active on the sheet as i've added the ' character.
I need to input a future date and time into one cell. For example, if I have a member ship that ends on October 20th at 3:00 pm exactly the kind of format you get when you enter the function "NOW". I would like to put that into one cell and then be able to add and subtract from it.
For example I would like to do something like this, if I had inputed the date and time in A1:
"=Now-A1", it would be cool if I can get the remaining hours or minutes along with how many days are left but not completely needed.
It would also be beneficial if I can drill down further and do it by time zone as well.
Auto date and time using excel macro.
In cell B2 until Z2 I am inputting data.
Once the data has been inputted in cell B2, I like to have date and time to have in Cell B6.
If input in cell C2 then cell C6 to have date and time..
Is there anyway to lock down the time & date when I input a data? Assuming I have a TIME formula in column A, and a DATE formula in column B. So when I input any data in column C, A & B can automatically show and also lock the time & date.
View 5 Replies View RelatedI’m working on a project using Microsoft Excel 2010 and I want to add some features to facilitate saving and retrieving files process.
1.How can I save the daily created workbooks (Assume 15 files a day) in order to contain the current date (and time if possible) linked with certain cell(s) I have at my workbook forming the file name? (XYZ 2-4-2014) and/or (ABC 2-4-2014 23:11) and so on …
2.I’ve been through some other posts and I found VB code which saves the active file into specific path, but it is only useful for single workbook because multiple files are getting overwritten automatically. Is there a code which allows multiple/different files saving & creates daily folders?
I want a macro to take the current time and if it is less than 09:00am, I want it to set a variable to be the current time on the previous day.
Basically, an operational day runs from 09:00am to 08:59am the following day.
08:45am on Saturday 13 July (for example) should be recorded as 08:45am on Friday 12 July.
I am a beginner to Excel macros. I am writing a macro to find the value based on the search criteria am giving
E.g. ( Record in table)
Column A
24/07/2013 15:04:05
Input am giving
24/07/2013 15:04 ( since am not sure about the milliseconds)
I need to find and fetch the Datas based on the input am giving
ChDir "C:Documents and SettingssysxxxDesktopcode testNew Folder"
ActiveWorkbook. SaveAs Filename:= _
"C:Documents and SettingssysxxxDesktopcode testNew FolderBillsFileName.xlw" _
, FileFormat:=xlExcel4Workbook, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
Here's the code. My only question is how would I change "BillsFileName.xlw" to be the name of the current workbook?
Is it something as simple as
New Folderactiveworkbook.name.xlw
I am currently trying to adapt the following code which is in VBA (Sheet1). It currently ensures mandatory cell entry of cell C2 before saving, and if this is not done then it would not save the item into the relevant directory. I would like to adapt this code so that cells B2 to R2 are all mandatory, and if they are not filled in a message box with the cell title (which would be in B1 to R1) would pop up. If the cells are not filled in then it will not save (the same function it carries out for cell c2 currently). The code is attached to a command button, i have tried to make the additional cells mandatory by playing around with the If Trim(.cells(2, 3).value) part of the code with the AND function etc however i have had not had any luck.
View 7 Replies View RelatedI am writing a macro that will perform a loop operation to export files. I want the user to specify the path, and the macro will save each exported file to that folder.
I did a number of searches and I can't find exactly what I'm looking for.
I think I want to use ChDir after using CurDir. But I don't know how to code the macro so that it asks the user to specify the location.
It is currently 11.40 AM. When I evaluate
Code:
?Now() > TimeSerial(11,30,0)
I get True.
However, when I evaluate
Code:
?Now() < TimeSerial(11,50,0)
I get False.
Why is this?
I need a way to compare the time of the computer with the one in the cell and bring up a message box if the time matches.
Yet i don't want it to be a one time makro. What i want is to be able to work with the worksheet and that at the same time i want a paralel function to check whether the time in the cell matches. Something like agenda in Outlook.