When User closes the workbook, it has to hide all the sheets except two sheets. THose two sheets are named as "Input Sheet" and "Button".
When User opens the workbook, he / she should be able to see only these two sheets and an input box needs to appear to unhide any one sheet. There will be 3 hidden sheets which will be named as, (1, 2 and 3).
While opening, If user inputs 1 in the inputbox then only the sheet named 1 has to be displayed along with "Input Sheet Button Sheet".
I'd like for my spreadsheet to open with only Column A visible; I'd like all other collumns to stay hidden.
I want to create a marco to unhide column(s) based on the value of an individual cell.
For example:
if I enter the number 5 into cell A1, I would like Columns B:F to unhide. if I enter the number 2 into cell A1, I would like Columns B:C to unhide. Is this possible?
I'm having a challenge with a spreadsheet that puzzles me: I'm using this quite simple code to hide one of the spreadsheets (named "Ark2"). It written directly in a module as a subprocedure and there's no more code than this:....
Code: Sub ShowAdmin() Sheets("Admin").Visible = True End Sub I'm getting the following error message: Run-time error '1004' Unable to set the Visible property of the Worksheet class
I want to hide & unhide columns using only (plus minus) button which is appearing on top of current sheet. I have couple of files with that options built in, but I dont know how to do it. I tried to see macros but appears that there is no macros at all in that file??
Private Sub Worksheet_Change(ByVal Target As Range) With Sheets("Sheet2") Select Case Target.Address(False, False) Case "B12"[code].....
I need to change it so that it hides a range of rows, say (6:26) instead of adding a line of code for each of the rows from 6 to 26 that I want to hide
Also how can I go about hiding the same rows on 5 more sheets, can I add more sheetnames after "Sheet2"?
I pulled some code off the internet to “force” users to enable macros by hiding all sheets except a “Welcome Page”. It works great except that it also unhides sheets that are meant to be hidden by when the workbook is opened.
How would I adjust the following code so any sheets/ tabs containing the words “New Project” are not automatically unhidden? Below is the code pertaining to unhiding. I did not paste the code in its entirety as it is fairly long.
Option Explicit
Const WelcomePage = "Macros"
Private Sub ShowAllSheets() Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets If Not ws.Name = WelcomePage Then ws.Visible = xlSheetVisible Next ws
Worksheets(WelcomePage).Visible = xlSheetVeryHidden End Sub
I have a speadsheet that has 27 columns for time entries, however employees seldom need to use more than the first 12 columns. I need to protect the sheet but would like the employees to be able to Unhide the columns when they need to use them, then reHide them. I can't find this as an option in either 2003 or 2007.
I have the following code, it moves a row of data to another sheet based on a certain in the status column.
When the row is copied over to the other sheet, I would like when it pastes the data in to UNHIDE the row. This is due to the fact that at the current time all of the sheets have rows that are hidden unless there is data in them.
I would like to keep the current macros that I have and add the following:
A macros that can link the check boxes with the corresponding categories and rows in the other two sheets. If the box is checked the corresponding rows in the other sheets should appear.
I have color matched the check boxes with the rows on the two other sheets I would like to be linked up with.
I am trying to create some code that will work each time a cell is updated. For simplicity, when cell A1 on Sheet 1 is greater than or equal to 25,000, I want Sheet 2 and 3 to be shown (they will already have been hidden). When A1 on Sheet 1 changes to less that 25,000, I want only Sheet 4 and 5 to be shown. I want to be able to change the number back and forth in A1 so only Sheets 2 and 3 show when A1 is >= 25,000, and only Sheets 3 and 4 to be shown then A1 < 25,000. I can't seem to find how to hide sheets based on a cell changing. I can only find how to permanently hide sheets.
When my spreadsheet opens it automatically protects the sheets using the following
With Sheet1 .Protect Password:=SpreadsheetPassword, UserInterfaceOnly:=True .EnableOutlining = True End With
and I use the following to hide the column if the toggle button on my form is 'true'. The problem is it gives an error if the sheet is protected. it worksfine without protection.
If ToggleButton1.Value = True Then Range("column_calories").EntireColumn.Hidden = True Else Range("column_calories").EntireColumn.Hidden = False End If
I have a sheet called "Summary", there is a cell, AR8, of that sheet that is linked to other sheets. If AR8 of "Summary" has a value other than 0 I would like it to unhide. But if the value goes back to 0 again I would like it to hide itself again.
In the attached abbreviated example, what should the second line in each of the three macros read to direct the hiding/unhiding of rows in the adjacent sheet? Right now I'm trying a If/Then configuration but it's not working. I was able to figure this out using grouped check boxes but a list box should be graphically "cleaner" and hopefully simpler in coding. The original table list is hidden in column "A", if that is important. I could use a combo box but the menu list is short and I think the list box approach will be simpler.... If there is a way to combine the three macros into one.
I want to set up a few workbooks with 11 sheets. Sheet 1 will in effect be an index, with True or False values in say cells D5:D14. The True/False values will be generated by form control check boxes in some of the workbooks and by IF(TODAY()>xxxx formulas or similar in other workbooks.
I then want to be able to hide or unhide sheets 2-11 based on the True/False values in cells D5:D14 in sheet 1.
There is 2 parts to my question and I will explain them as best as i can.
1. I have a front sheet and 12 other sheets ( 1 for each month of the year) they all have the same layout. On my front sheet I want to create a button which will capture the sheet onto my front sheet for the current month, whether this means to make 12 buttons to choose which month is displayed on the front sheet or one that detects the date by system time i dont mind.
2. These 12 sheets will ideally be hidden and what I am wanting is again, on the front sheet 12 buttons for each sheet to bring up the corresponding hidden sheet so they can be viewed, and then on each of the 12 sheets another button which will hide them and return the user to the front sheet.
I'm familiar with the code to allow grouping/ungrouping in a protected spreadsheet; http://www.ozgrid.com/Excel/outlining-protected.htm. How would I code to allow for hiding/unhiding cloumns and rows while still protecting the spreadsheet? Also, how could i allow for this file to be shared? Currently i'm getting an debug error when another person enters the file.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I have a master sheet where users can change the name of 20 different sheets in the workbook by changing a cell value on the master sheet. Here is the code:
Code: Private Sub Worksheet_Change(ByVal Target As Range) Dim rCell As Range If Target.Cells.Count > 1 Then Exit Sub
[Code]....
The next step which I am having issues with is hiding the sheets. I want all sheets in the workbook to be hidden except for the master. I only want the other sheets to be visble if the user inputs a name on the master sheet.
So if the cell contents on the master sheet, say "B9", is blank, the sheet in the workbook that corresponds to that cell will remain hidden. If the user inputs anything, say "Sheet1", in cell "B9" on the master sheet, I want that sheet to become unhidden and to be named "Sheet1"
All, can I protect my worksheet while at the same time allow users to unhide a specific range of cells?
I'm hiding cell range FA:FK, but based on certain conditions I want to allow the user to unhide the cells but I do not want the user to be able to unhide any other hidden ranges. if there is a way to do this without using VBA. If it cannot be done with VBA
I have a bit of code in sheet two of my document that requires user input to produce output. However I have the document set up in a vway that requires the actual input to be placed in a vell in sheet one, and the cell in sheet two is just "=cell in sheet one". This causes the input cell in sheet two to change but the output cell does not produce the new answer.
I have attached my workbook. What I would like to do is to have an input box to where you input the Material, Gauge, and Size and then have it return the rest of the values on Sheet 1. The material is listed as the worksheet name and the other information is inside that sheet. For ex... I would enter in Stainless, 7, 48x120 and it would give me the rest on sheet 1. I am totally lost, I have tried several different things but am coming up with nothing.
I've just started using Excel and everything is really confusing. I can't make sence of the online help or the various boards. Hopefully anyone can atleast make some sence of my question.
I don't know about combability issues but I think we have Excel97 / Swedish version at work and at home I have the English 2007 version so mostly I will try to do as much I can at home but it have to work at my job computer.
Anyways I want to create a sheet where users can input data, something like this
Date : automaticly show the current date but the option to change it Time : and dropdown menu where I can choose day, evening, night and Some various fields where the users can input some settings.
And somehow the ability to submit the data into another sheet and clear all input when done automaticly. with every submit it should add another row with information in the other sheet.
i am trying to merge cells based on the input from another sheet. these input will change from month to month and i need the sheet to cancel the merge and merge again based on the new input.
Example.xlsx the file showing what i need it to do.
I have a userform that has Label 1, textbox1 and textbox2 at the top. (I shall call it HEADER)
Then, arranged in a row i have combobox1, textbox4, textbox6, textbox7 and label7 (I shall call LINE1)
On a row beneath this i have combobox2, textbox12, textbox14, textbox15 and label 10 (I shall call LINE2)
I need a way of finding the first empty row on sheet 1 (easy bit) and then putting the info from the HEADER and LINE1 in the first empty row, then HEADER and LINE2 in the next empty row etc etc. There are 5 rows in total
