For the following code:
Code:
Sub ShowAdmin()
Sheets("Admin").Visible = True
End Sub
I'm getting the following error message:
Run-time error '1004' Unable to set the Visible property of the Worksheet class
I have a workbook with several sheets that I created some time ago. I have hyperlinks on the main sheet which point to other sheets in the same workbook which can be viewed when using the hyperlink, however the linked sheets are hidden. Somehow in this workbook I removed both the horizontal scroll bar and the lsiting of sheet names. I can not figure out how to get them back so I can unhide and or add new sheets.
View 4 Replies View RelatedI am unable to unhide some rows on a sheet. Row 1 though 34 the row numbers are blue. After that row 65 and on are black. I can unhide columns but not the rows. By the way row 35 through 64 are missing or hidden. How do I unhide everything?
View 2 Replies View RelatedIs there any way (in vba code) to unhide the sheet of a given named range?
If would come before the following line of code whee CurReference is already defined
Application.Goto Reference:=CurReference
I have a sheet protected and filters enabled. I use this code to enable sort and filters:
[Code] ........
Nevetherless, when I try to sort, I receive this message in excel: "The cell or chart you re trying to change is on a protected sheet.
To make changes, click Unprotect Sheet in the Review tab (you might need a password)."
i am uable to use autolfilter when protecting sheet via vbacode even though i have checked the autofilter box to be able to use it whilst protected, why does it work when i manually do protection but does not work via vba?
View 9 Replies View RelatedIt was suggested that cells formatted as lists will now allow new rows or columns. I don't think this is case but not sure how to tell? Other suggestions were merged cells or cells protected. Not sure if any of these are the case either.
View 5 Replies View Relatedi want to hide my sheet if A1.value = 0(zero) and if unhide the sheet if A1.value = greater than 0(zero)
View 11 Replies View RelatedI'm having a challenge with a spreadsheet that puzzles me: I'm using this quite simple code to hide one of the spreadsheets (named "Ark2"). It written directly in a module as a subprocedure and there's no more code than this:....
View 4 Replies View RelatedWhen User closes the workbook, it has to hide all the sheets except two sheets. THose two sheets are named as "Input Sheet" and "Button".
When User opens the workbook, he / she should be able to see only these two sheets and an input box needs to appear to unhide any one sheet. There will be 3 hidden sheets which will be named as, (1, 2 and 3).
While opening, If user inputs 1 in the inputbox then only the sheet named 1 has to be displayed along with "Input Sheet Button Sheet".
I want to hide & unhide columns using only (plus minus) button which is appearing on top of current sheet. I have couple of files with that options built in, but I dont know how to do it. I tried to see macros but appears that there is no macros at all in that file??
View 3 Replies View Related code:
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Sheet2")
Select Case Target.Address(False, False)
Case "B12"[code].....
I need to change it so that it hides a range of rows, say (6:26) instead of adding a line of code for each of the rows from 6 to 26 that I want to hide
Also how can I go about hiding the same rows on 5 more sheets, can I add more sheetnames after "Sheet2"?
I pulled some code off the internet to “force” users to enable macros by hiding all sheets except a “Welcome Page”. It works great except that it also unhides sheets that are meant to be hidden by when the workbook is opened.
How would I adjust the following code so any sheets/ tabs containing the words “New Project” are not automatically unhidden? Below is the code pertaining to unhiding. I did not paste the code in its entirety as it is fairly long.
Option Explicit
Const WelcomePage = "Macros"
Private Sub ShowAllSheets()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If Not ws.Name = WelcomePage Then ws.Visible = xlSheetVisible
Next ws
Worksheets(WelcomePage).Visible = xlSheetVeryHidden
End Sub
I need to make a excel costing model to calculate various products prices. I am using Excel 2010.
I have many products and do not need all of them displaying at the same time, therefor I inserted a Checkbox (ActiveX Control) that hides my columns that I do not need. I did that by inserting the following and it works fine :
[Code].....
The problem is I now need to lock certain cells so that they can remain fixed and the recipe cannot change.
Once locked my checkbox no longer works and I get the following error :
"Run-time error '1004': Unable to set hidden property of the range class"...
I have a speadsheet that has 27 columns for time entries, however employees seldom need to use more than the first 12 columns. I need to protect the sheet but would like the employees to be able to Unhide the columns when they need to use them, then reHide them. I can't find this as an option in either 2003 or 2007.
View 2 Replies View RelatedI have the following code, it moves a row of data to another sheet based on a certain in the status column.
When the row is copied over to the other sheet, I would like when it pastes the data in to UNHIDE the row. This is due to the fact that at the current time all of the sheets have rows that are hidden unless there is data in them.
Is it possible you could add the unhide feature?
[Code] .....
I would like to keep the current macros that I have and add the following:
A macros that can link the check boxes with the corresponding categories and rows in the other two sheets. If the box is checked the corresponding rows in the other sheets should appear.
I have color matched the check boxes with the rows on the two other sheets I would like to be linked up with.
I am trying to create some code that will work each time a cell is updated. For simplicity, when cell A1 on Sheet 1 is greater than or equal to 25,000, I want Sheet 2 and 3 to be shown (they will already have been hidden). When A1 on Sheet 1 changes to less that 25,000, I want only Sheet 4 and 5 to be shown. I want to be able to change the number back and forth in A1 so only Sheets 2 and 3 show when A1 is >= 25,000, and only Sheets 3 and 4 to be shown then A1 < 25,000. I can't seem to find how to hide sheets based on a cell changing. I can only find how to permanently hide sheets.
View 9 Replies View RelatedI want to restate the tabs after using DisplayFullScreen = true
and setting the commandBars ("").Visible = false
I would be very thankful for your Help as I'm newie to VBA in Excel.
When my spreadsheet opens it automatically protects the sheets using the following
With Sheet1
.Protect Password:=SpreadsheetPassword, UserInterfaceOnly:=True
.EnableOutlining = True
End With
and I use the following to hide the column if the toggle button on my form is 'true'. The problem is it gives an error if the sheet is protected. it worksfine without protection.
If ToggleButton1.Value = True Then
Range("column_calories").EntireColumn.Hidden = True
Else
Range("column_calories").EntireColumn.Hidden = False
End If
I have a sheet called "Summary", there is a cell, AR8, of that sheet that is linked to other sheets. If AR8 of "Summary" has a value other than 0 I would like it to unhide. But if the value goes back to 0 again I would like it to hide itself again.
View 6 Replies View RelatedIn the attached abbreviated example, what should the second line in each of the three macros read to direct the hiding/unhiding of rows in the adjacent sheet? Right now I'm trying a If/Then configuration but it's not working. I was able to figure this out using grouped check boxes but a list box should be graphically "cleaner" and hopefully simpler in coding. The original table list is hidden in column "A", if that is important. I could use a combo box but the menu list is short and I think the list box approach will be simpler.... If there is a way to combine the three macros into one.
View 2 Replies View RelatedI want to set up a few workbooks with 11 sheets. Sheet 1 will in effect be an index, with True or False values in say cells D5:D14. The True/False values will be generated by form control check boxes in some of the workbooks and by IF(TODAY()>xxxx formulas or similar in other workbooks.
I then want to be able to hide or unhide sheets 2-11 based on the True/False values in cells D5:D14 in sheet 1.
There is 2 parts to my question and I will explain them as best as i can.
1. I have a front sheet and 12 other sheets ( 1 for each month of the year) they all have the same layout. On my front sheet I want to create a button which will capture the sheet onto my front sheet for the current month, whether this means to make 12 buttons to choose which month is displayed on the front sheet or one that detects the date by system time i dont mind.
2. These 12 sheets will ideally be hidden and what I am wanting is again, on the front sheet 12 buttons for each sheet to bring up the corresponding hidden sheet so they can be viewed, and then on each of the 12 sheets another button which will hide them and return the user to the front sheet.
I'm familiar with the code to allow grouping/ungrouping in a protected spreadsheet; http://www.ozgrid.com/Excel/outlining-protected.htm. How would I code to allow for hiding/unhiding cloumns and rows while still protecting the spreadsheet? Also, how could i allow for this file to be shared? Currently i'm getting an debug error when another person enters the file.
View 2 Replies View RelatedI have a master sheet where users can change the name of 20 different sheets in the workbook by changing a cell value on the master sheet. Here is the code:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rCell As Range
If Target.Cells.Count > 1 Then Exit Sub
[Code]....
The next step which I am having issues with is hiding the sheets. I want all sheets in the workbook to be hidden except for the master. I only want the other sheets to be visble if the user inputs a name on the master sheet.
So if the cell contents on the master sheet, say "B9", is blank, the sheet in the workbook that corresponds to that cell will remain hidden. If the user inputs anything, say "Sheet1", in cell "B9" on the master sheet, I want that sheet to become unhidden and to be named "Sheet1"
All, can I protect my worksheet while at the same time allow users to unhide a specific range of cells?
I'm hiding cell range FA:FK, but based on certain conditions I want to allow the user to unhide the cells but I do not want the user to be able to unhide any other hidden ranges. if there is a way to do this without using VBA. If it cannot be done with VBA
I have the below code to email a specific sheet to an email address, however the email stays in the outbox and isn't sent. Is there something missing from the code or is it a setting issue with my email? I'm using Outlook 2010.
[Code]....
using Excel 2007/Vista
when I go a new edit a macro, I get the message
"Cannot edit a macro in a hidden workbook. Unhide the workbook using the unhide command"
Where do I find the relevant "unhide command"?
I have a macro that looks for the last empty line( starting from the bottom of a range) the selects this line and clears it. The issue I am having is that it selects more the the range that it is coded for and for the life of me I don't understand why. This is the code,
Sub DelLastRowCols()
Dim sh As Worksheet
Dim yourPassword As String
yourPassword = "pswrd"
Application.ScreenUpdating = False
Sheets("Hrinput").Select
Sheets("Data").Visible = True
Sheets("data").Select
[Code]...
The Sheet "Hrinput" is the data input page, the sheet "data" is a seperate worksheet where all the data is kept. Currently this code will find the first used row from the bottom (row 478) but it will clear columns A- V of that row, not the A:F as defined. This range (A-F) is one of 5 set ranges, for 5 different data areas, on the same "Data" page. So when this macro runs it clears the data for the other 4 areas.
