i am trying to merge cells based on the input from another sheet. these input will change from month to month and i need the sheet to cancel the merge and merge again based on the new input.
Example.xlsx the file showing what i need it to do.
I want to enter a number in cell, select a value from a drop-down list, and have another sheet updated with that info. For example, on sheet1 cell A1 = $900, A2 = Western Region (drop-down list). Sheet2 would have a list of values that would update based on values entered in sheet1:A1 and sheet1:A2. Is this possible using formulas or do I need to use VBA?
View 1 Replies View RelatedThe begining portion of this works fine, I have it moveing data from one column to another, but I then need it to combine two rows (BW and P) and then place that into column (O)...
View 3 Replies View RelatedI have data written in Cells B5, C5, D5 etc that changes as you add more column data
I am trying to figure out how to merge cells starting from Cell B3 based on used cells in row B5 to end of column.
Now I know that merging cells is usually not a good thing in VBA, but I'm working on a data report that just looks bad unless longer pieces of text can span several cells to minimize column width.
So here's the problem:
I have a column of 1's and 0's in columns E and F, and text in Column G. I want to merge the cells in columns G and H for that specific row if there is a 1 in either the E or F column for that specific row. And I need to do this for a long range...rows 7-5000. Any ways that VBA can do this?
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
long story short, we ended up with an excel sheet like this: Screen_Shot_2014-05-11_at_4.png
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.)
Screen_Shot_2014-05-11_at_46FDQO.png
I googled for days, i only found Visual basic commands i guess? that only merge same rows. and they were poorly made. beside that it didn't work properly. Method to do it automatically?
EXCEL 2013
We are doing a graduation project on an international airport, consist of scheduling flights on check-in counters automatically.
Excel sheet like this:
Were y-axis are the check-in counters and x-axis is the timeline horizon (cell per 5-minutes)
I will do a VLOOKUP, to change each flight number to it's ID from an other sheet.
But the problem is that i want to AUTO-MERGE all cells with same value, because they represent one flight! and if i shortened the column width i can't see anything.
I want it to be like this: (i've done this manually, and it's VERY time consuming with errors because we have to do it for all days.) Any method to do it automatically?
EXCEL 2013
I'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...
[Code] ....
It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.
MergePic.JPG‎
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedI'm trying to create a formula similar to this:
=Calculations!(Indirect("N"&A2)-Indirect("AB"&A2)+Indirect("AA"&A2)
The idea is that the user will enter a value in cell A2. That number will determine the appropriate rows in the formula above.
Couple ways:
1) Format the cell as Text: Format->Cells->Text
2) Enter the zip code with a ' preceding the number, i.e. enter 00345 as
'00345
3) Enter the zip code with the formula ="00345" ...
I have a range of cells that I want to sum based on a range inputed by the user. The range begins with cell c27 and ends with cell au27. I want the user to be asked the beginning cell and ending cell of the range they want to sum and then output the answer.
View 4 Replies View RelatedI am trying to create an advanced spreadsheet in excel that caters for people who really need to be told exactly what to do and what not to do. So based on the selection in column A I want to disable and change the background colour of some cells as follows (but only disable the cells on the same row):
columnA = Number then disable cells D, F, G and change to red
columnA = Link then disable cells E, F, G and change to red
columnA = Image then disable cells D, E and change to red
Trying to run a VBA to colour a range of cells based on the input of a name. I can write the basic level VBA to colour one cell by numerical input but struggling to see how this can be adapted to colour a range of cells and if instead of 1,2,3,4 etc the case could be replaced as text: eg Joe, John, Jason etc.
View 9 Replies View RelatedI have a macro code for conditional formatting. The first 2 lines of the macro are
Private Sub Worksheet_Change(ByVal Target As Range) ....
On the attached spread sheet here is what I am trying to do. In B2 I will either enter D (digital label) or F (Flexo label). With that than if a D is entered nothing else will happen with in spread sheet but if F is entered D23:Q40 will need to be cleared out and blank.
View 5 Replies View Relatedi have a certain column that tells me if a client has withdrawn from the company, and the column just says "y" or "n" i want excel to automatically copy the whole row to another sheet if that cell is a "y" for yes the client withdrew...
View 9 Replies View RelatedI want cell g12 to be locked unless cell h7 is Grass Fire or Timber Fire (H7 is a drop down validated cell)
View 8 Replies View RelatedSo I'm creating a UserForm that takes user input to create a worksheet based on the values input. My question is: How to select a range of cells based on a variable input value? For example, it asks how many competitors there are, and the user can input 5, 8, 10, etc. So I want that many cells in Row 1 selected, whatever the value input is.
View 9 Replies View RelatedI am working on my spreadsheet and was wondering if anyone knows if cells can be Protected or Unprotected based on the value of another cell?
Here is what I am looking for:
If cell "A16" on the "Input Sheet" equals AR then Protect Cells J16, K16, L16, M16, N16, and O16
If the value of A16 on the Input Sheet DOES NOT equal AR then leave those cells unprotected.
Has anyone ever done anything like this? On my spreadsheet it would allow the user to skip the unnecessary cells as opposed to having to Tab through them. Not a big deal but definitely would be a time saver and a lot more user friendly.
If you have any questions or concerns just let me know. I will wait to see what the Excel Guru's come up with.
I am using Excel 2007.
Sheet 1 - I have columns filled with dates (weekdays only) For example 28-May, 29-May, 30-May up to 28-Nov. Above 10 rows below each date columns and each cell has some values.
28-May29-May30-May
0.50.50.5
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
1.01.01.0
Sheet 2 - I have Start date defined in B1 Cell, and End date defined in B2 Cell
I need defining the formula to sum all the cell values fall between the date range defined in Sheet 2 B1 and B2.
For Example if B1=28-May B2=30-May, I want the sum of all the numbers come under the range of 28-May to 30-May, with this above example, it should be 19.5.
I have lot of data in three columns like this. The first column is "Name", the second is "Comment" wherein I want the macro to write some comment, the third one is DOB. The problem is that the names in column 1 repeats many times. I want a macro to write in column B "either Old or Older or Oldest" based on the Name and DOB. Thus David with DOB 13 Sep 1982 be marked Oldest in Column B and David with DOB 25 Aug 1988 be marked Older and David with DOB 24 May 1990 be marked Old. Similarly William and Rita should be marked either old or older or oldest. As the data are enormous I do not want to refer the actual name in the programming. I want to call them using a variable in programming.
NameComment DOB
David 25 August 1988
David 13 September 1982
David 24 May 1990
William 24 March 1980
William 25 July 1987
William 13 August 1989
Rita 17 July 1990
Rita 24 April 1989
Rita 13 June 1988
The example file is attached
I am designing a from with a variable number of titles. The user should be able to insert a title into a column by typing in the title that he wants into a text box, and pressing a command button that I have created ( named add). The problem arises when I try to get the text to lie vertically as opposed to horizontally (in the cell, not as a text box. If this can only be done as a textbox, let me know). Is there any way to do this?
View 5 Replies View RelatedI am trying to create a UserForm in Excel 2010 that will look for a part from our database (or on a specific Sheet, possibly a hidden sheet), then add specific data from that part's row into a new line.
More Specifically:
| Part # | Description | Category | SubCategory | Cost | Labor Hours | Weight | Etc |
I want to be able to input the Part #, and have it automatically add specified information to sheets 1 and 2 and those two differ. 1 is our Quote Sheet, and 2 is our bill of materials.
Also, I need each piece of information to go to a specific column (ex. Cost always goes to Column K)
What I have now is a broken UserForm that references a DOC file with a Table, but I need something a good but more complex.
Ideally, what I want is to have 4 ListBoxes where you choose Category --> SubCategory --> Make --> Model then have several CheckBoxes below that would determine whether to add a part (Cost, Labor, Weight).
The reason for this is because we have no need for the Cost or Labor Hours in our Bill of Materials, but need that information for our Quotes. And we generally don't need Specific Dimensions in our Quotes, but DO need them in the Bill of Materials...
Can I make it so that it will insert Pre-Specified information into both sheets at the same time?
Rather than having to give it a range, I'd like to have a generic range giving me room to add or subtract values in the column without changing this statement.
Code:
Worksheets("Sheet1").Shapes("Combobox2").ControlFormat.ListFillRange = _
"O2:O14"
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type [30] in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
View 5 Replies View RelatedDate
#
Lname
Fname
[Code].....
With that said, I want to put the row number of a user in (I have a few thousand on this spreadsheet, and all the = data be automatically pulled based on the row number I put in cell B1. So I'm hoping to write in cell B1 the following - "143" (without the quotes), and the remaining cells in column B automatically pull that data based on that, so it would look like the following
Row #
143
Name:
=C143&" , "&D143&" "&E143
[Code]....
How do I write the functions to keep the columns the same, but change the row number based on the number I input?
Need to autohide cells in sheet 2 and 3 based on sheet 1 cells that are hidden. (Example if i hide 150 switchgear on SOV tab it will hide 150 switchgear in Customer and Foreman sheets as well).
View 1 Replies View RelatedI have a sheet (sheet1) of around 900 rows with data in columns A-K. Column B contains a unique value.
Sheet2 contains data which needs to be highlighted in sheet1 and each row in identified by a unique value in Column B.
sheet1.PNG
sheet2.png
In sheet 1, I only want to highlight the cell which exists in sheet 2 for the matching reference number in column B. For example, in sheet2, the value 'PM328491CN' exists and the value 'CN' is present in cell c2. I want the cell that contains this value in sheet 1 to be highlighted (cell C6).
So, find the matching reference, the highlight the cell in the row which is present in both sheets.
