I have workbook and when I open it I'd like to be able to open another workbook and copy the data into a new sheet in original workbook. The file I'd like to open is always "123_PPS.CSV". I'd like to enter the number (123) into a msg box and then have that file open or copy into sheet2 so that I can get info from it into the cells in the packing slip.
View 14 RepliesI need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
I am trying to open a workbook with
Workbook.Open filename:="xxxxx"
The address in the xxxx is something like this "G:AnimalMammalZZZZGorillayyyy.xls"
The ZZZZZ portion is the result of an InputBox.
What is the syntax for placing the result of that InputBox in the middle of the address?
I am trying to do is have the code display an input box asking the user to type in the file name, or generate this automatically? to an existing folder in a drive
My master file, imports data from another source (excel file) pastes it in the necessary columns at the moment, however the file is run every Monday so the file name is generic, last week was 10723, this week will become 10724 when the data is run next week,
Can I do what I want to? Via either an inputbox for the file name, or by using something so the file name becomes “107 “ & Weeknum(today()-3)
I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedJust wondering if its possible to create a macro which has an inputbox that gives you part of the file name that you would like to open. We have a report that is issued weekly and I'm trying make it so I type in the date of the report in the correct format and it opens the file (saved on my desktop). I don't want to have to go in and edit the macro everyweek to change the file name.
View 1 Replies View RelatedI have the inputbox so i can set a string value,
When the inputbox Cancle button is pressed i want to exit sub,
If the inputbox value is nothink and ok button, I want the msgbox displayed then goto newname.
If the inputbox has a value do >>>>>>That>>>>>
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedI have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7
I have the need to be able to open a closed file to archive some data from a
current file.
what coding i need to be able to kick the "open file" bit off?
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
I've got a couple of formulas in a workbook which lookup values in another workbook. When I reopen the initial workbook the formulas results come back as errors (i.e. #VALUE!) unless the workbook it is looking at is also open. This is not desirable, does anyway know how I can lookup values in another workbook which are not open? The formula which is causing me problems is as follows:
= SUMIF( 'H:Infozoom[2006-01_assy.xls]New Table1'!$F:$F,$A8,'H:Infozoom[2006-01_assy.xls]New Table1'!$AH:$AH)/60
I've encountered a bit of an odd one. I am opening a tab delimited file, which has been sved as an xls. When I open from file manager, it opens correctly. When I open from Excel, I have to go through 3 screen dictating how the data is set up, and the end result is that a couple of the numbers come through as text, rather than numbers.
Failing an explanation - how do you open workbooks as file system objects - currently I am opening them using
Workbooks.Open Filename:=wb.Path & "/" & ws. Range("B1").Value
If I open them by mimicking the FM, perhaps it will work OK.
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
Looking for a macro, to run upon opening file, that opens a linked file and if the file is already open does nothing.
View 2 Replies View RelatedI have a workbook were a user will write down some info. Then I need to copy that data to a second workbook located anywere in the Hard drive. i used the function "GetOpenFilename" or the "Application.dialogs(xlopenfile) to ask the user where is the file (and open it). Now I need to get the name of that file. How can I get it?(the name of the file the user selected to open). P.S. I saw there is somewhere a "Print" function to copy data from a workbook to another closed workbook. I was planning to have both workbooks open and then just use several lines like:
View 4 Replies View RelatedI need a code to open a file automatically based on file name, for example if the active file name is "trial", then it need to open another file named "trial1" based on which the macro will run, because I have two set of files and I want to compere daily with two users. for example the file names in Set a- iron, cement, stone, sand where as the set b-iron1, cement1, stone1, sand1
View 1 Replies View RelatedWhat I would like to do is to open an excel workbook from a bat file in dos with one arguement.
so something like
start c:lacklist.xls 2315t
Once the blacklist.xls is opened I would like to have the macro to save the excel file as a csv file ignoring all the prompts and use the argurement 2315t as the directory to save it to on the j drive ie save to j:2315tlacklist.csv. Then close the workbook and continue with the rest of the commands in the bat file.
I'm guessing I have to use GetCommandLineA to read in the arguement but I can't find anything on the net that gives a clear explanation of how to use it.
I use Excel 2003 on a Windows XP operating system. I update a rather large xls file (5.9 mB) daily. I saved an update yesterday, but when I went to open it from my directory today, nothing appeared.
The file is listed, with its properties, in the directory, but when I request the file, Excel opens, nt the file.
None of my other files seem affected. They open normally.
What can I do to retrieve this important file?
Is there a way to use VBA code to open a .bat file?
View 6 Replies View Relatedi would like to open .txt file into already existing excel sheet.
i have 2 sheets, sheet1 and sheet2
in sheet1 i want to import a Report.txt file from this path- D:sample
in sheet2 i want to import Report1.txt file from this path - D:Sample
i want the text files to be opened as excel files in the specified sheets........
I'm using the following code to loop through all excel files in a folder and collect data.
Code:
' Open the file dialog
Set diaFolder = Application.FileDialog(msoFileDialogFolderPicker)
diaFolder.AllowMultiSelect = False
[Code]....
Do While sFil "" 'will start LOOP until all files in folder sPath have been looped through However, comep of the files have the string 'comp' in the title. I don't want those.
Can I add a qualifier to the above t=code that basically says: If the file name contains 'comp' then ignore it?
I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes
Sub OpenPDF()
'Dim pdf As String
On Error Resume Next
'pdf file to open
pdf = "K:PDFmypdf.pdf"
'open the pdf file
ActiveWorkbook.FollowHyperlink pdf
End Sub
So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!...........
I'm trying to use a file name that I got when I used the Application. GetOpenFilename command. I've stored the file name as a variable call "dafile". However with this command, I get the whole path included, which is fine, until I try to switch to another file to grab some data and then return to the opened file.
Essentially what I'm trying to do is to get some data from another open file and paste it into the file that I asked the user to open. The name of the file the user needs to open is unknown so the GetOpenFileName works well, but since it includes the whole path, I can't use the command - Windows(dafile).Activate
Is there a way I can delete the path part... or more simply, switch between workbooks without knowing the name.
Or is it possible to use the range...select....copy command to get the data from the known workbook. I don't know the proper format to specificy a workbook- sheet-range location to copy the data. Here's a copy of the code to date
'copies header names from known file (where this macro is stored)
Rows("1:1").EntireRow.Select
Selection.Copy
dafile = Application.GetOpenFilename("Text Files (*.txt), *.txt")
'If dafile <> False Then
'MsgBox "OPen" & dafile
'End If
Workbooks.Open (dafile)