Just wondering if its possible to create a macro which has an inputbox that gives you part of the file name that you would like to open. We have a report that is issued weekly and I'm trying make it so I type in the date of the report in the correct format and it opens the file (saved on my desktop). I don't want to have to go in and edit the macro everyweek to change the file name.
View 1 Replies
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View RelatedI have workbook and when I open it I'd like to be able to open another workbook and copy the data into a new sheet in original workbook. The file I'd like to open is always "123_PPS.CSV". I'd like to enter the number (123) into a msg box and then have that file open or copy into sheet2 so that I can get info from it into the cells in the packing slip.
View 14 Replies View RelatedI am trying to do is have the code display an input box asking the user to type in the file name, or generate this automatically? to an existing folder in a drive
My master file, imports data from another source (excel file) pastes it in the necessary columns at the moment, however the file is run every Monday so the file name is generic, last week was 10723, this week will become 10724 when the data is run next week,
Can I do what I want to? Via either an inputbox for the file name, or by using something so the file name becomes “107 “ & Weeknum(today()-3)
I am trying to open a workbook with
Workbook.Open filename:="xxxxx"
The address in the xxxx is something like this "G:AnimalMammalZZZZGorillayyyy.xls"
The ZZZZZ portion is the result of an InputBox.
What is the syntax for placing the result of that InputBox in the middle of the address?
I have the inputbox so i can set a string value,
When the inputbox Cancle button is pressed i want to exit sub,
If the inputbox value is nothink and ok button, I want the msgbox displayed then goto newname.
If the inputbox has a value do >>>>>>That>>>>>
I have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
I have a macro that sends data from excel using MS Outlook. I want to add a more specific Subject header in outlook, and do this using an input box.
I thought adding something like this would work, but it doesn't... (below are just extracts from a very long code...)
Dim CurMonth as String
CurMonth = InputBox("Please enter the reporting month","")
.Subject = "Trial Balance - All companies" & CurMonth
When outlook generates the email, all I get in the subject line is "Trial Balance - All companies"
I am trying to write a VBA that rename an Excel file by adding todays date at the end of the file name. For example rename the file
C:Documents est.xls to C:Documents est020221.xls 020221 is todays date
I have a macro to loop through the files in a folder. The macro will then open up the files and copy over to a new workbook.
As I want to rename the worksheets created in the new workbook as part of the file name. Any idea how to extract the file name out and stored in a string?
Currently it will be named after the Cell A1 in the opened file. However I would like to rename as below.
Example, the file name : 030309_Mary Sales.xls, Worksheet Name to Create : Mary Sales.
File name : 030309_John King, Worksheet Name : John King
(in the code, 030309 taken from my menu sheet,D4 is the keyword , to search in files containing D4, where D3 is the directory to look in)
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
I have one excel file and i want to see the VBA code without open excel file. because when i open that excel file automatic delete userform and save then open that file. i have a second copy of that file in that file there is a one other option to see and learn from it. 1.my computer security is High but when i open the file one userform is come and ask me about enable or desable the macro when i check the box that file is open and run properly.
and after that never ask for Enable or desable the macro, every time that file is open in high security without ask..security. for your information many vba code in that file. i have only one question how see the code without open that file ?
I've been trying to use combo boxes to open, then copy and paste information from specific worksheets the user requests. So far, my approach has been unsuccessful --and the suggestion to simply use the GetOpenFiles procedure was helpful but failed to address more than the "open files" part of my application. Can variables be part of an excel file address as I've tried to use them in the "strFile =" statement immediately below?
Public strFile As String
Public strSheet As String
Public strSheetName As String
strFile = "D:Documents and SettingsmccaralDesktopMP2 MONTHLY FINANCIALS_
15_FINANCIALS" _ & strSubtask + "-" + strSubelement + "2007" + strMonth + ".xls"
strSheet = "Task Order" & strSubtask & "-" & strSubelement
strSheetName = strSubtask & "-" & strSubelement
Workbooks.Open Filename:=strFile
Sheets(strSheet).Select Range("A1:P15").Select
Selection.Copy...................................
I have forms by differnet departments each day. The files are saved as the department's name then date Byrd 82708.xsl. I need a command button that will pull data from three cells in each of these forms. The master list will not be in the same folder as the deparment forms, the cells are E20, f20, f25. I have a text box were the user will input the date, by this date I would like all forms with this date in that folder to have their data pulled from those three cells and returned in master list.
View 5 Replies View RelatedSplit from Open Image Using A String & Cell For File Name. what it looks like, but maybe I am not using the FollowHyperlink correctly?
Sub testFloodMap()
Application. ScreenUpdating = False
Sheets("FloodMap").Select
'Picture = ActiveSheet. Range("W4").Value This works manually with the path in "W4"
'Now I tried to use the FollowHyperlink next
Application.FollowHyperlink "C:Documents and Settingsjim hutchMy DocumentsNarrative1My Appraisals2009-" & Sheets("Base").Range("B2") & "floodmap.jpg"
Sheets("FloodMap").Select
ActiveSheet.Pictures.Insert(Picture).Select
Exists = Dir(Picture, vbNormal).....................
1 I need to open a csv file in order to use data in it at location "C:BarkingEMCIN" to input into an xls spreadsheet. I then need to use the info from the xls spreadsheet along with other info input by users to produce another .csv and it be deposited at "C:BarkingEMCOUT"
The name of the file at "C:BarkingEMCIN" will change everyday or even multiple times a day and be in the format "AVA_DA_260208_BPL_EDF_001.CSV" "AVA DA " will remain the same "260208" will be todays date the next 2 will be interchangeable depending on requirements and use BPL EDF and SSE will be interchangeable depending on requirements and 001 will be the version whcih will be changable. _ underscores will be used as seperators
They will then be save in the format "NOM_DA_260208_BPL_EDF_001.CSV" using the same prinipals as before but automatically saving as the next available when needed with a prompt to tell the user what it will be
I get pdf files from my UPS carrier and need only a certain part from the text to import into my administration. Sure I can convert the pdf into text and import it into exel that way, save it into xls or csv and you are in but... is there a short cut? Since you can select and copy a part of a pdf file I wonder if it is may be possible to do so within a macro as well no? Is this a crazy question? because I could not find a similar question by searching the forums. May be I was searching for the wrong subject.
View 2 Replies View Relatedthe Data Grabs and pastes perfectly now but the Macro copies the data from the open file - the problem is that every day the filename (eg stats_01_02) changes according to the date so what I want to know is how to have the macro copy the data from an open file using just the first part of the filename.
View 5 Replies View RelatedI have a macro that asks the user what pages they would like to print on a particular sheet. In the example below, a button will be assigned to pages 1-5 on a sheet and thus the user has the option of printing from page 1 up to page 5. Any page number outside this range will result in an error message and the user will be asked to re-enter the end page number. This is the code I pulled from this forum and partially modified:
View 4 Replies View RelatedI have 800+ files the problem is that the file name ends in 80 different combination so I need to try all of those for each file.
eg: one of the 800 is "109 st no 103 av" the file could be called:
"109 st no 103 av nb1_cleaned.xls" or
"109 st no 103 av nb 1_cleaned.xls" or
"109 st no 103 av nb 1._cleaned.xls" or
"109 st no 103 av sb1_cleaned.xls"
.
.
.
.etc
I wrote a code to try all those combinations, the issue lies a space the code adds before _cleaned, how to remove it?.
So the name should be
"109 st no 103 av nb1_cleaned.xls"
but my code is letting it be
109 st no 103 av nb1 _cleaned.xls
Where the variable Ord is the "1" after nb.
Find the code below:
[Code] ....
I have a Workbook "forecast.xlsx" and several Workbooks which have a individual Number in the Filename (E.g. "3960........xls", "3961.......xls etc.) in the same directory as "forecast.xlsx" + projects"
Now, I would like to browse through "forecast.xlsx" in column H, searching for hyperlinks. In Column H are these Projectnumbers located which are used in the filenames above. Whenever the Cell cointains a hyperlink, following should happen (that far i managed it by myself):
- Store the Cellvalue in a String Variable
- Go to the Directory this.workbook + projects
- browse this folder, searching for a File which contains the stored string in its filename
- open the file
- copy a range
- close file
- This.workbook.Activate
- follow the Hyperlink which has been stored as String before
- paste selection
- continue browsing through column H, looking for the next hyperlink.
I have a VBA which runs bugless, but it copies the wrong range, but to the correct destination.
See the code below:
Sub RESLT_INPUT_ALL()
Dim cell As Object
For Counter = 1 To 1000
Set cell = Worksheets("Projects overview").Cells(Counter, 8)
If cell.Hyperlinks.Count > 0 Then
[Code] ......
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I have a huge spreadsheet that has part numbers and quantity. I need to find the same part number and sum the quantity of that part number.
View 10 Replies View RelatedWhat code do I need to use to set a date into cell R104?
Simple I expect but I have to start somewhere
I'm trying to create a macro to replace a link on a formula.
The formula is as below
='[Players Report 31121999.xls]Player1'!$AK$23
Where 31121999 is the date. there's a workbook everyday with different sheets for every player
I want to have a macro that gets the date I inputed in another cell and changes the date in the formula I displayed above (just changing the date).
i needed a macro that would go through the cells in column A, which is a list of adverstiser and insert a row when the name of the advertiser changed. So the macro needs to compare each cell to the one before and when the values differ, insert a macro. But I need one that will first go through column A, and then once finished with the items in A, go through column B and do the same thing. Can't get the column B to work...
View 9 Replies View RelatedUsing the below formula. I know that I should get the result of 32 if I am dong this correctly (182 matches part 1 of which 32 match in part 2).
=SUMPRODUCT(--($A$1='7. PM BDE'! $J$3:$J$366))*(--('7. PM BDE'!$L$3:$L$366=1))
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
Here is the code I'm working on:
I want this code to replace the value of s with the value of a cell.
sub Macro2()
Dim s As String
s= value of (cell F2)
Range("I8").Select
ActiveCell.FormulaR1C1 = "='[(s).xlsm]Payroll Computation '!R8C11"
End Sub
I'm trying to write a macro, and the first thing I need it to do is paste a value into the currently selected cell. This value, though, will usually be multiline. So when I try to do it now, it pastes into the selected cell and the cells below it (one for each line of the pasted value). When I'm pasting manually, I avoid this by pressing F2 to edit the cell first, and then pasting. But how can I do this using a macro? Is there a type of paste command that will insert the multiline value from the clipboard into the selected cell?
View 2 Replies View Related
