Need code to insert multiple rows. I would like to be able to click a command button and have the number i have entered in a textbox be the number of rows inserted in the spreadsheet above a static cell like A12.
View 2 RepliesI need to figure out a way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
View 9 Replies View Relatedin inserting 8 rows as per the attached spreadsheet highlighted in orange, and labelling them, obviously, the year after the one above it.
View 10 Replies View RelatedI have a spreadsheet with about 10,000 lines/rows of text and I want to insert 4 lines/rows under each of these. way to do this efficiently without having to insert under every line/row?
View 9 Replies View RelatedDoes anyone have codes to insert and delete multiple rows. I need to run a macro where a dialog box pops up requesting number of rows to insert and delete.
View 9 Replies View Relatedway to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
View 9 Replies View RelatedI have a string of numbers ex. 1234, 5678, 91011 in 400 rows. Before each string I would like to add 88.
View 4 Replies View RelatedI'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
My starting data looks like this:
HEADER
DATAROW1
DATAROW2
DATAROW3
-emptyrow-
HEADER
DATAROW1
DATAROW2
DATAROW3
I need it to look like this:
HEADER
DATAROW1
-emptyrow-
DATAROW2
-emptyrow-
DATAROW3
-emptyrow-
[Code] .....
I'm new to Macros and below is my requirement.I need to split my data into multiple rows based on count and the first row should have the value but the other rows should have a value as zero.
Input
Count Value
1 400
2 101
3 300
4 450
Output
Count Value
1 400
2 101
20
3 300
3 0
3 0
4 450
4 0
4 0
4 0
I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
I am trying to add insert rows using macro.
L column fills with numbers. if L1 value is 5 then below need to insert 5 rows.
I tried below Macro.
But it getting Error.
Sub InsertRowswork1()
Dim LastNumber As Long: LastNumber = ActiveSheet.Range("L" & Rows.Count).End(xlUp).Row
While LastNumber >= 2
If Not IsEmpty(ActiveSheet.Range("L" & LastNumber)) Then
[Code] .....
I have a spreadsheet with 27 Columns and 439 rows of data. I need to copy each row of data that has a certain criteria and paste the same data 141 times below it and then manipulate the data. In the same spreadsheet I need to copy a row of data that has other criteria in it and past it 30 times below it, and then manipulate the data.
I have been using the copy and insert copied cells function, but I have to scroll down 141 or 30 rows each time to ensure I add in the correct amount of rows. Is there a more productive way to do this? I have about 10 workbooks with approximately 47 tabs/worksheets each that I will need to update in a similar fashion.
The best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1
Price 2
Price 3FruitDeliciousPearStore 1
Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.
Sheet1
A
B
C
D
[Code].....
I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
as per the attached, need to insert those grey rows subject to the following condition :
if current row date <> next row date, .and. current row latitude / longitude <> next row latitude / longitude , insert grey row with date = current row date, else insert grey row next row date
note that the coordinates in the repeated grey rows, for the "Home" location, are the same through the sheet, should be entered by the user, at the beginning of the process, since there will be a spreasheet per user.
date is in column K
latitude / longitude are in columns B / C
this will be of tremendous assistance in automating mileage claim review.
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies View RelatedFor my thesis dataset I am looking to insert two rows after every six rows (the company name) in a dataset with approximately 30,000 rows.
For the first extra row that would be cell 4/cel6
For the second row that would be cell 5/cel6
A picture is added below in which I have manually entered these formula. Is there any way to make this a swift operation rather then a manual one?
untitled.JPG
Is there a way to have a sort of programmed button that could be pressed that would insert all of the rows at once? Or perhaps a new line could be generated for each table with the only missing data being the values that would have to input manually?
To make it more clear I have attached a sample table. In the sample table, what I would want to do is insert a row at row 47 and at row 93. I want to do these at the same time easily. Keeping in mind that there are 40 some other tables arranged in series like that in one single spreadsheet. I cannot simply hit ctrl and select the two rows and then insert both rows, this would be equally as time consuming to do for all of the rows that would have to be added. Also, in the attached table, most of the values are either calculated values or are hard set numbers. The manually inputted values occur in columns B, E, and F. Everything else is copied down from the previous line.
Why is my code below doesn't work on Book2. The code is on Book1. If I'm on Book2 and run the macro, it applies the macro on Book1 and not Book2.
View 4 Replies View RelatedI have file which is repeating, and i want to insert a row after the end of each repitition.
here is my sample data from:
123sat
123sat
444mat
444mat
444mat
555abi
to:
123sat
123sat
new row insert
444mat
444mat
444mat
new row insert
555abi
I know it involves a macro and i dont know how. pls help as its a HUGE data and i need to automate it.
How to add a row in a spreadsheet every say 5th row OR add a row whenever a specific string or value is found?
View 9 Replies View RelatedI am wanting to insert a new row after every 6th row in a spreadsheet that contains in column A of each new row the text xxxx.
View 2 Replies View RelatedI had fix my rows is from 1 to 100,and each ten rows consists as one row and I had use border to separate each ten rows.(Eg,row 1 to 10 is 1row).....So when I click a button and I choose to add 10rows after row 20,how can I do so? because when i choose to add 10rows after row 20,the existing row start from 21 will move down....But the problem is I had fix my rows to 100 only...How can I do so that the row 21 will move down and at the same time check the total of rows will not exceed 100?
View 9 Replies View RelatedI need to insert 2 blank rows within a spreadsheet above certain other rows that contains data that starts with a particular text string.
Details:
Column A has office codes in the form of "0301A", "0301B", etc.
Column F will have billing codes that could start with either "L" or "ND" or "NF".
Problem:
I want to separate the L's from the ND's and also the NF's in column F based on which office they are billed to.
End result:
What I want to end up with are two blank rows in between each office code in column A, then another two blank rows between the L's, ND's and NF's.
I know this has been asked a million and 1 times, but I can't seem to find any history of it.
Does anyone know how to add a row in a spreadsheet every say 5th row OR add a row whenever a specific string or value is found?
I have two separate tables, one above the other, and need a way for it to automatically shift the second table down or a row between the two tables any time another row is added to the top table. Is there any way to do that?
View 2 Replies View Related