I have a spreadsheet with about 10,000 lines/rows of text and I want to insert 4 lines/rows under each of these. way to do this efficiently without having to insert under every line/row?
View 9 RepliesNeed code to insert multiple rows. I would like to be able to click a command button and have the number i have entered in a textbox be the number of rows inserted in the spreadsheet above a static cell like A12.
View 2 Replies View RelatedI need to figure out a way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
View 9 Replies View Relatedin inserting 8 rows as per the attached spreadsheet highlighted in orange, and labelling them, obviously, the year after the one above it.
View 10 Replies View RelatedDoes anyone have codes to insert and delete multiple rows. I need to run a macro where a dialog box pops up requesting number of rows to insert and delete.
View 9 Replies View Relatedway to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
View 9 Replies View RelatedI have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
I have a string of numbers ex. 1234, 5678, 91011 in 400 rows. Before each string I would like to add 88.
View 4 Replies View RelatedI'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
My starting data looks like this:
HEADER
DATAROW1
DATAROW2
DATAROW3
-emptyrow-
HEADER
DATAROW1
DATAROW2
DATAROW3
I need it to look like this:
HEADER
DATAROW1
-emptyrow-
DATAROW2
-emptyrow-
DATAROW3
-emptyrow-
[Code] .....
I have a sheet that has a section in range (c18:k25) (it is merged and text is wrapped) If that amount of space is not adequate to fit all their information I would like to add a macro that when activated it asks how many rows would you like to add and then based on that number whether it be 1-10 it would insert a new row to that merged range so they can continue adding more information . I have the sheet locked down to prevent changes so it would have to be unlocked and then re-locked within the macro.
View 1 Replies View RelatedI regularly run a report that comes out in a slightly different format each time depending on whether or not there is data for specific criteria. for instance (sample attached): criteria a, b, and c are in rows, 1, 2, and 3 in columns. a, b, and c are expected to repeat themselves several times. if there is no data in one instance of b then you may see something like abcacabc.
I'd like to loop through each row in column a, check to make sure that it is the correct value (either a, b, or c) and if not, insert a blank row so I can then copy the data to my final project without having to worry about formatting.
the example above would then become abca cabc
I'm new to Macros and below is my requirement.I need to split my data into multiple rows based on count and the first row should have the value but the other rows should have a value as zero.
Input
Count Value
1 400
2 101
3 300
4 450
Output
Count Value
1 400
2 101
20
3 300
3 0
3 0
4 450
4 0
4 0
4 0
I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
I am trying to add insert rows using macro.
L column fills with numbers. if L1 value is 5 then below need to insert 5 rows.
I tried below Macro.
But it getting Error.
Sub InsertRowswork1()
Dim LastNumber As Long: LastNumber = ActiveSheet.Range("L" & Rows.Count).End(xlUp).Row
While LastNumber >= 2
If Not IsEmpty(ActiveSheet.Range("L" & LastNumber)) Then
[Code] .....
I have a spreadsheet with 27 Columns and 439 rows of data. I need to copy each row of data that has a certain criteria and paste the same data 141 times below it and then manipulate the data. In the same spreadsheet I need to copy a row of data that has other criteria in it and past it 30 times below it, and then manipulate the data.
I have been using the copy and insert copied cells function, but I have to scroll down 141 or 30 rows each time to ensure I add in the correct amount of rows. Is there a more productive way to do this? I have about 10 workbooks with approximately 47 tabs/worksheets each that I will need to update in a similar fashion.
I am having to write a vba code for a survey data captured code online.
I am attaching the code and the vba module that is suupose to do
following things
2) dELETES THE LAST 3 COLUMNS
3) Initial 6 letters from each cell (Q0001=) UPTO (Q00011=)
4)Inserts new row at top from Q1 TO Q11
5) Sorts data on Q6 (Faculty/Staff)
Before all this the i need to insert blank cells for questions that have not been answered and shift the cells right (condition 1) ....
I used the macro editor to create a "simple" macro to edit 7 rows of text. The steps were basic and simple - F2 key, backspace about 25 times, and down arrow then repeat these 3 steps 6 more times. The macro I got gave me the result of the very first cell as I was recording the macro. I think I remember the old Lotus 1-2-3 macro text - {edit}{backspace}{down}. Wish it were still that simple.
View 5 Replies View RelatedI have an excel template that is used for communicating in projects to teams their responsibilities and defining which stream/group has Accountability/Responsibility/Consulted/Informed (known as a RACI model) for the activity.
For any given project activity, there are rules:
One person is responsible for performing the activity (R)
Only one person can be accountable (A)
Many people can be consulted through the activity (C)
Many people can be informed of progress (I)
You must have an A and and an R for each activity
And one person can be accountable AND responsible A/R
Given that project activities can run to 100 + activities in some of our more complex programmes.... I'm looking to provide a flag in the spreadsheet for when an error has occurred and a gap in Responsibility or Accountability is created. (Less worried about testing for C's and I's)
See attached, I hope it is clear.
I believe this would be a very simple query for some but I am a complete novice in VBa and am using a msgbox in one of my file but I need to split the message text into multiple lines but I do not know how to do the same.
View 6 Replies View Relatedsample merging file.xlsx
I have a data array of 7 col and 256 rows. I want to focus only on the first 2 columns though. Here is what is going on. In the first column I have numbers from 1-256, these numbers are merged to the appropriate size to accommodate the data in column 2. However, the data in column 2 is not merged, it consists of 1,2, or 3 lines of text. Excel deletes the text in the rows below 1 if I try to merge, excel does not allow multiple row merge selections. What I am looking for is a formula that looks at column 1, finds how many rows are being merged in column 1, then looks at column 2 and identifies the number of rows needed for merging and displays that text in only one row. Basically, it's a formula that merges multiple rows of text in col 2 depending on the number of merged rows in col 1.
No.Customer/Operator
1Fairbanks Morse /
Beloit, WI
2H+H Umwelttechnik /
[Code]....
I am trying to consolidate an .835 raw text file that is full of receipts and payments into rows by specific values/characters. Once opened within notepad/text format, I figured out that the ~CLP is the referencing value/character used to break up each individual payment.
I need to somehow use the ~CLP as the value(s) to sort the text into new rows, with each row pre-leading with the ~CLP.
For example:
~CLP*442.24*DTM*B6*PR~CLP*124.32...etc
New Row format needed:
~CLP*442.24*DTM*B6*PR
~CLP*124.32
At a high level, I have several thousand rows of data. For the sake of simplicity, assume there are two columns: 1) Name; and 2)A comment (optional, could be blank). See below for example..
Sheet 1
Row 1: Mike │ "Great to work with"
Row 2: Mike │ "Bad manager"
Row 3: Tom │ "Great guy"
Row 4: Mike │ (blank)
Row 5: John │ "Cool"
Row 6: Mike │ "Best boss"
On a separate sheet, I want to be able to somehow use a lookup function to combine all the comments for each name in a nicely formatted package (notice how I skipped the blank space so it wouldn't take up a line.
Sheet 2
="Comments for "&[ref to cell containing "Mike" in another sheet]
- Great to work with
- Bad manager
- Best boss
I need a VBA macro that deletes whole rows if the cell in one of the columns does not match one of three texts. For example, in column B, if the text in there isn't "Mary", "Joseph", or " " (empty space), the row must be deleted.
View 4 Replies View RelatedThe workbook has multiple sheets, and a cover sheet. Each project has a sheet and the status, costs, updates ect. are updated to the cover sheet.
Problem:
What happens is there is a cell which has conditional formatting on it, e.g. If text is Green then colour cell green, if cell text is amber then colour amber and if cell text is Red then colour Red. This works fine.
If the cell text is green then I need a number of rows hidden, if it is amber or red then show the rows.
I have found the following
Sub
If Target.Value = 1 Then
Rows(Target.Row).RowHeight=0
Else
End If
End Sub
Which I have changed to:
Sub
If F4.Value = Green Then
Rows("5,6,7,8,9,10.Row).RowHeight=0
Else
End If
End Sub
So this does not work, need to know why and how to make this work for each sheet I am on e.g. ActiveWorksheet?
I have a workbook with 50 sheets. Within each sheet are rows of text that I need to search for specific text.
I'd like to search each row from each sheet for specific words (e.g. "7 days") then show the resulting rows data/text in a new sheet along with the name of the sheet and row number it came from.
e.g.
Sheet 1 contains the text "7 Days" on line 40
Sheet 2 contains the text "7 Days" on line 1, 30, 50
In a new sheet, I would show the entire row in its own row that contains the text "7 Days" along with the name of the sheet and row number it was found in
vba script to convert the text in a cell(split considering "Space" as delimiter) into multiple Rows and Single column & the resultant row's(A1:A7000) values need to be searched in Column(B) of another sheet,if the search result is false then the value in the row need to be highlighted in red.
I am able to split the values in one column into mutiple rows,but need to have all the resultant values in a single column.
i,e,.
I am able to split it as below:
Column A
Column B
Column C
[Code]....
for second situation - search I could search based on the values by using Vlookup() function,but unable to highlight when search result is false.
ex:
if the search string "ACB" in Sheet1 is not available in the sheet2, then value "ACB" should be changed into red.
I have around 50 text files with similar design per attached file. I need to import the text files with criteria below:-
1. include file name
2. let user choose the folder
3. exclude data from "work in process summary" to "work in process cost totals"
4. only have one title in the excel files which all text files is combined "Item, Line ....."
5. If the text files do not have title like "Item, Line, ..." do not import
Is it possible to have all criteria listed above by running a macro?
A.txt
I want to split the contents of a single cell(ALT Enter as delimiter) into multiple cells and retain the values in column B.
Ex:
A1: apple
banana
car
house
A2: yellow
B2: building
x
y
B3: O
Output:
sheet 2:
A1: apple B1: yellow
A2: banana B2: yellow
A3: car B3: yellow
A4: house B4: yellow
A5: building B5: O
A6: x B6: O
A7 B7: O
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc.
A2: A. Bellotti
A3: A. DEPPELER S.A.