I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
The Pivot Table is exactly what I want and I like that I can also sort by school or district. The problem: Cells B6 through E6 show up with correct information but the totals below that are all wrong. They seem to pull the same data from question 4.
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code: Sub Auto_Open() ' Dim sht As Worksheet If Range("A1") = 1 Then
I have 90+ rows of data that I want to transfer into a table format on another worksheet. At present I have laboriously been copying and pasting from one to the other but am losing the will to live:
Id like to create a macro to do this for me. Is it a matter of recording the macro to replicate as I copy and paste or is there a better way....I have dabbled with a pivot table but cannot get it to do what I want.
Here is the code from a recorded macro that does one person/row of data but I dont know how to make this automatic for all rows of data (see below):
Need code to insert multiple rows. I would like to be able to click a command button and have the number i have entered in a textbox be the number of rows inserted in the spreadsheet above a static cell like A12.
I have to use data tables to calculate Net Present Value (NPV) by altering specific variables.
My NPV is the result of a series of calculations to ultimately arrive at a cash flow figure and then apply the WACC (average cost of capital)
I understand how to use data tables But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV sensitivity
My sheet and calculations are all set up
I've done it manually by altering the figures on the Inputs and Data Sheet.
My NPV calculation is on the Workings and calculations sheet.
The data tables i have done manually are on the Inputs and Data sheet.
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well. - once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table. - once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table. - once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table. - and so on, the same with other 3 remains sheet.
I need to figure out a way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
way to automatically insert rows and copy data on multiple selected sheets. for example, if i insert a row anywhere on sheet 3, i need that same row inserted in the same location with the cells populated with the same data on sheets 4, 6 and 9.
I'm working on a national survey with valuable data from students. The plan is to turn around, 100 different reports to the departments with their respective students.
The issue that I have is creating multiple tables from multiple sheets in excel into a word table, any way of automating it.
What the tables look like in excel:
What I want them to look like in word, with a chart if possible:
I realize that I can just copy and paste easy table into word from excel and with a few clicks of a button, get what I want. But i'm looking for something to automate and simplify this process. There are about 300-400 variables that I need to crosstab with certain demographics.
If it matters any, I bought a software package (Q Market Research) but it doesn't make the tables look exactly how I want them to look. The data is from SPSS, those tables are flat out.
I have multiple pivot tables with different data source. I wish to have one slicer which control all the pivot tables. I would have one common colum for all the pivot tables which is the one i wish to control for instance the person in charge. Note that all my pivot tables are from different data source. how to do it?
The spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted b) Trigger the macro c) A row is inserted above the highlighted row in Tabs #1, #4 and #5 d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
I'm trying to create some vba code that will go into other .xlsx documents, pull all cells with a value in the first 30 columns and then return them as a table. Basically each work crew has a .xlsx spreadsheet containing their schedule and I am trying to bring them all together into one nice little package. If I go to import from external sources then click XML data, navigate to the folder they are in and them click show all files and pick my spreadsheet it imports nicely. Then I go to the next blank cell in column "A" and repeat for the 4 crews. Now I can filter by each crew but all 4 are visible on a single page as a table. I recorded a macro that shows everything I did, but it is not dynamic (the .xlsx source files name changes based on the month) I'm running XP sp3 with Excel 2010
I've already entered a variation of the formula below into 180 different columns. The only variation is where worksheet 322 is referenced. Each column references a different worksheet.
I have at least four other tables to build of the same size, and they're each going to use this same formula with an additional IF formula housed around it. Ideally I would be able to copy the table, then run find/replace, where I could substitute = with =IF(new formula, and then run find/replace a second time and sub ))) with ))),more new formula). The problem of course is in between those steps lies a formula error preventing me from running the second step. The only alternative I can think of is to build the new formula, copy it into a word document, and run find/replace 180 times to tailor the formula for each column. That's what I did to build the first table.
I have a large list of cells in excel: 15, 33, 90, 102, 149, 159, 217, 228, 238, 247, 305, 312, 369, 417, 428, 486, 538, 548, 606, 621, 671, 679, 737, 805, 816, 874, 915, 923, 981, 1029,1038 .
Under each of these cells I would like to insert 20 blank rows. I have tried various codes but i'm struggling with the fact that as soon as I insert 20 rows at cell 15, all the other cellnumbers change.
This is a reformulation of this post: [URL] ...........
I have a spreadsheet with 27 Columns and 439 rows of data. I need to copy each row of data that has a certain criteria and paste the same data 141 times below it and then manipulate the data. In the same spreadsheet I need to copy a row of data that has other criteria in it and past it 30 times below it, and then manipulate the data.
I have been using the copy and insert copied cells function, but I have to scroll down 141 or 30 rows each time to ensure I add in the correct amount of rows. Is there a more productive way to do this? I have about 10 workbooks with approximately 47 tabs/worksheets each that I will need to update in a similar fashion.
I have a spreadsheet that I need to add new rows everytime I have a new client. I a formula in the N column and a formula in the F column that I would like to automatically insert itself into the new rows.
The problem is this: I have arranged my table so that I can look at clients alphabetically, and according to other date... BUT now it wont let me insert a new row when I have a new client!!!
Is there anyway of keeping it so that I can insert a new row into my table, but preserve all of the formulas that I want automatically put into both the F and N column?