I have named a column as a range (in this case, "Data"). I have a macro that needs to always insert a line in range "Data" at row 3 and paste a value there. Currently I do not use ranges but rather use specific cell location. This works but is a royal pain when I add new columns.
View 3 RepliesI'm copying rows and pasting to a new worksheet but want to insert at the bottom not simply paste at the bottom of my destination table.
If wsExists(ShtName) Then
Set NextCl = Worksheets(ShtName). Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
cl.EntireRow.Copy Destination:=NextCl
End If
I've tried adding
If wsExists(ShtName) Then
Set NextCl = Worksheets(ShtName).Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
NextCl.EntireRow.Insert
cl.EntireRow.Copy Destination:=NextCl
End If
it adds rows but alternately and isnt correct.? I would also like to paste as Values not copy and paster the formulas
I've created a named range (A500:AB500) called "RowTemplate_C"
This row only contains specific formatting which I would like to use throughout my workbook.
How can I create a macro function whereby:
When I select a cell or row, and click a button (called "InsertRow_C" ),
This inserts a new row, and pastes the named range there.
I've recorded my actions and made several attempts .. but my knowledge in VBA is, as you can see, quite limited.
Sub Macro1()
Selection.Insert Shift:=xlDown
Range("RowTemplate_C").Paste
End Sub
I'm having a toughs time with what I thought was a simple task. I need to cut and insert/paste a range of cells and then repeat in a loop. Explicitly, I have 3 columns with 2990 rows. Every 46 rows is a 'group' and I want to cut each group and paste at the top of the sheet so I have only 46 rows and (2990/46*3) 195 columns. I need to preserve the order so that the group at the bottom becomes the rightmost group........
View 5 Replies View RelatedLooking for a code to do the following:
If rows 1 through 20 are unlocked and rows 21 to end are Locked
I want to use a Command Button to automatically
> Insert a new row (after row 20 and not before)
> Copy row 20 (which is already formatted)
> Paste row 20 onto the newly inserted row with all formats
The 'Add new material' button at the SMX sheet paste a range of formatted cells and formulas. The user is suppose to type in the description into the yellow filled cells. The problem is once the user enter sthe description in the yellow filled cells, i need the data to be copied into the FastCheck Sheet. Before that, a new row must be generated to copy for the data to be pasted.
View 2 Replies View RelatedI'd like to have done is to have a blank column inserted between columns W and X(these values change so the VBA statement should reference the end of the columns) and the values that are now in column Y(April 17th values) pasted as values into the now empty column X. I would like to do this for tabs Ann-Sheet 2. I'm having a bit of trouble with setting up the loop that would go through the desired sheets.
View 4 Replies View RelatedI'd like to know if it's possible (Excel 2007) to insert a function/button into a cell, which when clicked, will paste whatever is on the clipboard?
You can see a screenshot of my document here, and I'd like to insert a paste funtion in the red circle. Is it possible?
[URL]
I'm looking for a way to write a macro to insert 5 lines at the end of the data in column A. Then I want to copy a range into the newly inserted lines. I would press a button anytime I need this to occur.
Current last line of data A39
Need to insert 5 rows after A39
Then copy range BA30:CB34 into the newly inserted rows.
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code:
Sub CreatePercentageSheet()
ActiveWorkbook.Sheets("Sheet1").Copy _
After:=ActiveWorkbook.Sheets("Sheet1")
ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count)
ActiveSheet.Paste
End Sub
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have mananged to find and tweak the following code in order to serve my copy / paste to master sheet requirements.
At the bottom of the code I have added a delete rows based on column contents routine although I'm not sure if it is actually the right one to use.
I have included it in the same module in order to tidy up the whole process and have it all operate under one click.
As stated on the sheet in this exmple, The paste could consist of any number of sheets although the range is always the same on each sheet. (only amounting to around 20 rows that we are dealing with so no reams of data with odd empty rows that would take an age to find otherwise).
The data can look like it does on Sheet 2 here and also could look like it does on sheet 3. (this data is coming from a sales rep's order sheet)
From the routine in module 1, I just don't know where an "add an empty row" or delete all empty rows bar 1" code would need to be inserted in order to keep the process going until all sheets are copied.
I'm aware that with the delete code at the bottom, the whole copy process is completing before the delete process then does it's bit so think I'm on the right track in thinking that the delete all empty rows but leave one" requirements needs to be further up the code but I just don't how to get the result I need or where that code should break into the routine.
The only other way I can think to acheive the result is to allow the range to increase by 1 row on the form but somehow make sure that the last row in the range contains a character in column B to "trick/force" the delete routine to leave that row in. That would be do-able but the trouble is, how do you get a value into a cell that the delete proces would treat as data but not be visible so keeping my spacer line tidy? I've tried just putting a space in the last row of the range in column B but the row still gets deleted.
I'm working from a sales ledger file whereby I want all invoice data in one row although the Item Number & Item Description are on the first row. Rows 2-10 (for example) are the actual details of the invoice: Invoice #; Date; Customer ID; Customer Name; QTY; etc.
Is there a formula or easier way than copying/pasting the "Item Description" to the first column (J in this case) without any related invoice data?
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedAny shortcut for "insert cut cells"? I want to paste and shift cells down instead of pasting over existing data.
View 1 Replies View Related I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
I have a macro that does lots of cutting and pasting, and to make sure it can run without interference from my normal work, I did add the line Application.Interactive = False. But seems while I am cutting and pasting in other windows while the macro runs, sometimes it crashes on the paste part. Is the macro and the Windows Operating system sharing the clipboard?
FYI, Windows XP professional, Excel2000.
I m working with office 2003 pro in Windows XP.
2 Excel questions:
Is there a way to make the "paste" option in excel "sticky" (that is, so that you can do some other work in excel then come back and click "paste"? currently excel makes you go back and recopy then only can you paste. You cannot do anything between "copy" and "paste".
Is there a way to paste so that the cell is exactly copied? What i mean is, so that the formulas that are copied are pasted exactly as they were (without changing references)? (i get the right result when draggin and moving a cell, except that the original cell is emptied - but u get the idea). A work around is to add absolute refrences, and then take them away later - or to copy the formula in the formula bar and then paste it into another cell (one cell at a time ... )
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.