I'm looking for a way to write a macro to insert 5 lines at the end of the data in column A. Then I want to copy a range into the newly inserted lines. I would press a button anytime I need this to occur.
Current last line of data A39
Need to insert 5 rows after A39
Then copy range BA30:CB34 into the newly inserted rows.
I am trying to write a formula to insert in a macro for multiple lines of data.
Column B contains the date that I am comparing the date in Column C against. I want to be able to highlight the content on that row if the date in column C is greater than or equal to column B. how to write this?
Sample data:
3/12/20123/12/2012
3/12/20123/1/2012
3/6/20123/6/2012
2/29/20123/2/2012
I would need row 1 and 4 to highlight in red. this is part of a long Macro that is written and includes many other steps, but I cannot seem to make this step work correctly.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have a worksheet that contains data arranged in fields from columns A to J. The relevant columns for the purposes of the macro are columns B (customer codes) and G (sales values). Column B may contain a single instance of a customer code, or multiple (over 50), depending on how active a customer has been. The worksheet always contains many different customer codes with varying numbers of rows for each customer, sorted by customer. What I'm trying to do is write a macro that will loop through the worksheet and insert a blank line immediately after a change in value of column B (customer code), and in this blank line, insert the customer code in column B (which comes from the cell immediately above), a sum formula for all values within a range that relate to that particular customer in column G, and an IF statement in column J that relates to the SUM formula. The loop concludes when there are no longer values in column B.
I have managed to insert blank lines on change in values in column B, but am not sure about the best approach for inserting the SUM formula or the IF statement in columns G and J respectively.
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
I need to paste the first 10 lines of every page with a header.
I do not want to use a header, I want to designate every page to copy the first 10 lines from the first page and add those 10 lines. The "header" can not overwrite current data but needs to push it down 10 lines.
Example:
from cell b12 to i5, then
From cell d12 to j5 then
From cell d13 to k5 then
From cell d14 to l5 then
[Code]...
Each time back to cell b, i have to add 3 cells, like from b15 to b18.
I would like to automate this process, but i did not know how to make macro increment by 3. Etc. I have hundreds of numbers to deal with.
Is it possible to create a Macro where I minimize the work of copying the data from one tab and pasting it into another tab, in a specific cell..?
Summary:
I have a pivot which contains data like; Location, PO, Date, NCM, Inv & Total. There are different Locations such as AHM, BHU, BLR, CHA, and so on; and there are different PO, Date, Inv, NCM and the Total Amt. Each Location has 2 types; 1st AHM-1 & AHM-2, and so on.
My Requirement is;
I want the data to be pasted automatically in the respective tabs, referring the pivot.
Eg: the Pivot has the below details;
Location
PO
Date
NCM
Inv
Total
AHM
1234567890
15.04.2013
2000000420
13I0MH2I1001
3607.76
[Code] ..........
The Location AHM has two rows which is referred an AHM-1 & AHM-2.
In AHM-1 & AHM -2 The PO should be pasted in cell B27, Date in cell C27, Inv in cell E27, NCM in cell E31, Price in cell F43 and Descpn in cell C41 with that particular month. In short, where the cells are highlighted in color Green.
The sample file is updated in the below link. [URL] ..........
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
Template is created where the users copy/paste the data from other file. Data validation has been performed with the following steps:
1. Macro inserts the vlookup formula into column A, which isused for validating data that is entered by user from column B to E.
2. If the data is incorrect the N/A will be displayed in column A and invalid data will behighlighted in red color in column B.
3. This validation goes through the loop and after the loop is finished the pop message will be displayed and macro should stop so the user can correct the data.
4. After the user correct the data, the macro needs to run again to make sure there is no further errors. If there are no errors, thehighlighted cells should be cleared out of color and pop.
Here is the code that runs by command button:
Private Sub CommandButton1_Click()
Call FindNA
End Sub
Sub FindNA()
Dim ResultRange As Range
Dim ResultCell As Range
Dim iRow As Integer
[Code] ......
I need a Macro that can look in column A to find the date, and then drop down one row and move to column B and then copy the data in that cell to column C back up one row.
I've attached the workbook so you'll know what i'm talking about. I need the green cells to be moved to the blue cells all the way down.
COLUMN A =Date
COLUMN B =Empty Row
COLUMN C=Copy Details
COLUMN D=Paste Details
I am looking for a macro that will allow me to the following:
- search column F for "word1", "word2", "word3", and/or "word4"
- then match the search to row on column C data
- then copy/paste row or rows of matched data unto "Sort" worksheet but only data from columns A, B, C, and F
- also, when copying, copy the row above
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View RelatedI have set of data in sheet1 i want to copy and paste in sheet2 with same row height.
View 2 Replies View RelatedI have 2 reference cells with the date range to look for in C1 and D2.
G2 through IV2 have dates that run across.
I would like for the macro to look for the start and end dates in C1 & D2 and paste the new data as values from A1:B20 into those particular columns of dates within the range.
ABCD1head count23start7/1/092vac%5%end7/15/093iap%3%4misc%3%5off%21%6% ot0%7off%21%8% ot0%9rpr wk rt1.510inst wk rt5.0211go back %5%12nw Mvr %3%13fall out %10%14jep/incomplete %16%15lines in service116% esc3%17% change610%18churn rate60.994%19report rate0.297%20% of market2218%
dear friends when i am enter data manually this macro work fine.but same data I'm copy & paste macro not working.pls help me..
Sub REQD_KILOS()
Dim c As Range, MyString As String
Application.ScreenUpdating = False
For Each c In Range("J3", Range("J" & Rows.Count).End(xlUp))
MyString = Cells(c.Row, 6) & Cells(c.Row, 7) & Cells(c.Row, 8)
Select Case UCase(MyString)
Case "5000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.145)"
Case "4000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.115)"
Case "2000MSSP40/2"
End Select
Next c
Application.ScreenUpdating = True
End Sub
The task I have in front of me is that I have a very large spreadsheet (28,000 +rows) that has data that was exported from a legacy system that we no longer have. It has data in columns A thru G. I must get this data prepped to have ready for importation into the new system. What I'm trying to do is copy the data in cell A and cell B, everytime the value in column D = 1, and insert one blank row above and copy the values from cell A and cell B to cell A and cell B on the newly created row.
Below is a picture of what I'm trying to capture:
sample image.png
I thought that a macro would be a fairly easy way to do this, but it's proven challenging for me to write. Here is what I attempted using the macro recorder:
[Code] ........
I'm having an excel sheet with addresses. I need to copy some lines of the first sheet to the other sheet. Between the lines I want to copy there are 7 lines which shouldn't be copied.
I created the following macro which does the job: ...
Looking for a code to do the following:
If rows 1 through 20 are unlocked and rows 21 to end are Locked
I want to use a Command Button to automatically
> Insert a new row (after row 20 and not before)
> Copy row 20 (which is already formatted)
> Paste row 20 onto the newly inserted row with all formats
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB:
Sub CopyB2()
lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row
lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1
Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3)
End Sub
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I would like to have a macro, to copy the cells and paste it 6 times in a column. below are the format required.
Column A
Input
abc
ert
uty
Column B
Output
abc
ert
uty
abc
ert
uty
[Code] ......
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies View RelatedI have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.