Insert Cut Cells - Paste And Shift Cells Down
Aug 18, 2014Any shortcut for "insert cut cells"? I want to paste and shift cells down instead of pasting over existing data.
View 1 RepliesAny shortcut for "insert cut cells"? I want to paste and shift cells down instead of pasting over existing data.
View 1 RepliesIf I put a length in (G13) such as 4.44 & position from (H13) is 1. Then I want that length of (G13) to move its value (4.44) into (C15) the 1st cell to add to is (C15)
Then Move (C15) to (C16) 11.12 becomes C16
and move (C16) to (C17) and so on all the way down the C column.
When it hits the last joint (C374) position 360. I want a messageBox that says you can not insert anymore.
Basically shift the existing values down untill (C374)
I have only column C to shift the calue from (G13)
I do NOT want to delete rows!
Below is how it looks before macro:
GH12LENGTHPOSITION134.441
C14LENGTH1511.121612.221711.561811.861913.112012.872113.062211.992312.03
Below is how it will look after macro: The RED moves to (C15)
C14LENGTH154.441611.121712.221811.561911.862013.112112.872213.062311.992412.03GH12LENGTHPOSITION134.441..........................
I'm using a macro to copy cells (2 columns and between 1 and 5 rows [19 - 23 on s/s]) from one workbook to another but if I use
Rows("2:2").Select
Selection.Insert Shift:=xlDown
then every cell in the inserted rows are populated.
this is what I currently have
Windows("agent master.xlsm").Activate
Range("B19:C23").Select
Selection.Copy
Windows("distribution master.xlsm").Activate
Sheets("L38").Select
Range("A2").Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
but that doesnt work either. It just gives me an empty cell in A2.
I want to be able to insert-shift cells down based on criteria in another cell. For instance, I would like a macro that would look at column B for saturday and sunday and then insert-shift cells down on the corresponding cells in column D...
View 9 Replies View RelatedI am trying to create a macro that will add and delete individual cells depending on an IF statement. The code that I created deletes/adds cells regardless of the IF statement.
If Sheet1.Range("F3").Value = Sheet1.Range("G2").Value Then
Range("G2").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End
ElseIf Sheet1.Range("F3").Value = Sheet1.Range("G4").Value Then
Range("G3").Delete Shift:=xlUp
End
End If
Also, what is the easiest way to have this code apply to all rows within column F, while adjusting the corresponding cells referenced in column G? The last row within the spreadsheet changes.
I am trying to make a macro to take a set of data and shift the data range down depending on the value in the A:1 cell. For example if the data in column A starts with 5, 6, 7, 8 and so on.... I would like to copy/ paste and shift the column down 5 cells so I can start A:1 at 0.....so that the data can begin as 0,1,2,3,4,5.....etc.
View 3 Replies View RelatedI have this code (command button1) which works just fine. What it does is if cell 02 in sheet1 is "14" then it copies the entire row to sheet2. The same goes for all O column
I would like to change it a little bit.
Instead of copy i would like to cut the row, paste it in sheet2 and shift cells up in sheet1
Code:
Private Sub CommandButton1_Click()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim I As Long
Dim LastCol As String
[Code] ........
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
I have data in cells A1:FM1326 I want to delete all of the cells that say FALSE and shift the remaining cells up.
View 5 Replies View RelatedI have a problem in making a delete function/sub and i'm applying it to a listbox in userform ... i'm trying to delete a row of data in the listbox which refers to cells (A12:D12) ... and at the same row (row=12), there are other data cells (E12:H12) ... after deleting the cells all other data below the deleted cells will shift up taking over the deleted cells ...
View 9 Replies View Relatedhow can i get this
Sheet1
ABCDEFGHIJKL7WTXMF31326154RIO TINTOAUDMLWSINBFSALE 258414.13 ML W/S INT BD FD 16-Mar-0917-Mar-09-251307.75N
Whenever "online" appears in the "Desc" column I need to shift the matching row down (shaded area). for example, "online" appears in H2, hence, C2:E2 need to be shifted down to C3:E3 leaving C2:E2 blank. Next, H3 has "online" there, C3:E3 need to be shifted down one row so the result will look like the data on the "result" tab.
View 5 Replies View RelatedI need to shift all the cells in columns B, C, D, E & F up a row to align with the names in column A.
I have code to delete the empty rows.
Start:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1) 2 59038.753MARINA BELAIDI (MB2) 4 12325.55MARGARET CANT (MC6) 6 33002.25
Result Required:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1)59038.752 3MARINA BELAIDI (MB2)12325.54 5MARGARET CANT (MC6)33002.25
I am trying to delete a group of four cells and have the remaining block shift up. My code is below and crashes on the red. What is the right code to get this to work?
Code:
Do
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = Range("G1").Value Then
Range(ActiveCell:ActiveCell.Resize(0, 3)).Delete Shift:=xlUp
Exit Do
End If
Loop
I am looking for a macro that can delete whole rows (shift cells up then). How i would like it to perform is if there is nothing in cell(s) B then delete the whole row?
View 9 Replies View RelatedIn the range A1:Y66, for every cell whose formula returns a 0, I want it to delete that cell and shift the cells up.
Here is the code I tried, but nothing happened:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column > 25 Then Exit Sub
If Target.Rows > 66 Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
If Target.Value = 0 Then Target.Delete Shift:=xlUp
End Sub
i need a button to copy the content of A8:C28 and paste in another section of the worksheet, i get the button to copy and paste the selected range, but when i copy and paste again it overides my current paste, i need it to paste my new selection underneath my previous paste.
I need a macro that will "examine" the text of column B for every row checking to see if the text "Proper Text" is in the cell and if not, execute this code for that cell and then move on to perfrom the same until it finds an empty cell:
Selection.Insert Shift:=xlToRight
Range("B2085").Select
ActiveCell.FormulaR1C1 = "Click for detail image"
With ActiveCell.Characters(Start:=1, Length:=22).Font
.Name = "Arial"
.FontStyle = "Regular"
.Size = 10
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
Note that "B2085" above is the cell number that the script stops on to execute this code.
How do I shift all the cells up labelled data, so that there are no blank rows in between? I tried using the ones found on the forum via search but it is stuck in an infinite loop.
View 5 Replies View RelatedI'm trying to do is check each Row and move the last 3 Columns of data in each Row to the left so they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W). Columns A and B are temporary. Column A utilizes the formula "= COUNTA(B2:AG2)" to count the number of cells in the row that contain data. Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data in the active worksheet. Columns A and B will be deleted at the end of the Macro.
The GOAL (END RESULT) is for Columns A through W (and ONLY these Columns) to contain data (keeping in mind that Columns A and B will be deleted at the end). If some rows have Column W (and beyond) blank, then I want to MOVE data from Columns U & V over to V & W and then COPY data from Column T into the [currently] blank Column U.
I've been trying to get the Macro to start in the last row and, using CASE Statements, delete the proper range of cells and SHIFT LEFT as it counts backwards towards the first row. I'm not too sure this is the best approach and could really use some advice from the experts! I can provide a "test" file if necessary ... the test file I've been working with is approximately 6.5MB, but I can delete most of the 14,287 rows and still give a good representation of how the data varies.
Sub b_DeleteCellsShiftLeft()
' DeleteShiftLeft Macro
' Macro recorded 3/14/2007 by George Nicholaou
' Need to assign variable for current row (?)
' r=ROW()
' Columns A and B are temporary
' Column A utilizes the formula "=COUNTA(B2:AG2)" to count the number of cells in
' the row that contain data
' Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data
' in the active worksheet
' They will be deleted at the end of the Macro
' What I want the Macro to do from this point is:
' 1. Check each Row and move the last 3 Columns of data in each Row to the left so
' they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W)
' 2. The GOAL (END/RESULT) is for Columns A through W (and ONLY these Columns)
' to contain data (keep in mind, Columns A and B will be deleted at the end)
' 3. If some rows have Column W blank, then MOVE data from Columns U & V over to V & W............
I am trying to find a method for deleting empty cells in a range and shift cells left upon deletion automatically. I could do this manually, but with 3000 rows of data it could be a long task. I have attched a small spreadsheet to show what I am looking for.
View 5 Replies View RelatedI need assistance in shifting cells to left based on three (3) specific text values in column B. There are tons of data and extra lines and stuff but consistently these three (3) text values are consistently not aligned and I simply need to shift entire row 1 space to the left. I can do the long and tedious process of going through them all but is there a macro which I can play that does it instantly...
View 9 Replies View RelatedI've got a problem with one of my macros. This code should import a text file. The name of the imported file is the same as the value of the cell that is active the moment the macro starts. The way I've written it, the code can't find the needed text file.
Sub addfile()
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;E:aprojects" & ActiveCell.Value & ".txt", Destination:=Range(ActiveCell _
))
.Name = ActiveCell.Value
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = False
.RefreshPeriod = 0.........................
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedI've attached the sheet I'm working with. I need to delete most of column F and shift the rows to the left, but when I delete the cells it doesn't give me a prompt to shift the row, it just deletes the entire column or individual row. I need them to shift, what can I do?
Attached File : Coordinators Test.xlsx
I am looking for a method which would delete empty cells in a row, and then shift the remaining data to the left (filling the cells with data). I know that this could be done manually, but I need it completed for 3000 rows! I have attached a simple sheet to show what I'm Looking for.
View 2 Replies View RelatedI'm trying to have one cell be the constant place I enter data and then when I hit enter, I'd like the data I entered to be moved down to the cell below it. Then for every new number I enter in that first cell, it would auto shift the previous data down and add the new data to the cell below it.
Basically, I'd like to record data but I dont want to have to scroll to the bottom every time to enter new data since this list will be continuously updated. And I'd like the most recent data entered to be on top.
Then I want to take the top 100 cells in that column, and do a running average of them.
When I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies View RelatedI have a spread sheet that has RX codes as field headers and ones or zeros as values. I want to find all cells which contain "0" and delete those cells while shifting the remaining cells left. The range of cells is aj1:dr17365 and the sheet name is "May 07 Rx HCCs"
View 8 Replies View RelatedHow can I shift the range of cells I want to calculate an average from? For example I want to get the average of cells A1 to A10, so =AVERAGE(A1:A10) And next I want to get the average of cells A11 to A20, so =AVERAGE(A11:A20). But I don't want to manually change the data or delete rows all the time.Is it possible to do something like: =average(A1+10:A10+10)??
View 4 Replies View Related