Insert Text Into An Inputbox **
Aug 29, 2007
I have the following code that allows a user to type in an email address into an inputbox, and email a spreadsheet to the recipient in the input box. However, as 99% of the time this is going to be the same email address every time, can I populate the inputbox automatically with a given email address? for eg email@email.com
vaRecipients = Application.InputBox("Please enter recipient's email address. Please ensure Lotus Notes is open before sending.", "Email Literature Request")
View 2 Replies
ADVERTISEMENT
Jan 13, 2012
I'm trying to write a bit of to take a text string collected from an inputbox, and paste it into a specific cell.
Should be easy but where my text string from the inputbox is "XYZ", when it enters it into the required cell it enters it as " ="XYZ" ".
Attempt at code is below -
Code:
Sub EmailEdit()
Dim Response As String
Response = Application.InputBox("Input administrator email address", , , , , , , 2)
'Check to see if Cancel was pressed.
If Response = "" Then
[Code] .....
View 2 Replies
View Related
Apr 21, 2006
I want to be able to specify inside the message the word that is in cell F6. So it would say "You Must Give A Reason For The Amount Of Mgr Voids For Shawn"... shawn being the name in cell F6.
If Range("F9").Value > 50 Then
MyInput = Application.InputBox("You Must Give A Reason For The Amount Of Mgr Voids For This Employee")
If MyInput = "" Then End
If MyInput = False Then End
ActiveSheet. Unprotect ("13792468")
ActiveSheet.Range("F9").AddComment
Range("F9").Comment.Visible = False
Range("F9").Comment.Text Text:="" & Chr(10) & (MyInput) & Chr(10) & ""
ActiveSheet.Protect ("13792468")
End If
View 3 Replies
View Related
May 11, 2007
Sub AddRows()
Dim r As Long
For r = Cells(Rows.Count, 6).End(xlUp).Row To 2 Step -1
If Cells(r, 6) <> Cells(r - 1, 6) Then Rows(r).Insert Shift:=xlDown
Next r
End Sub
but find it somewhat unflexible. I don't always use the same column reference to determine where to add the rows. I was hoping someone would be able to integrate the inputbox usage that is in this delete rows code I got here
'Get the relative column number where the criteria should be found
lCol = Application.InputBox(Prompt:="Type in the relative number of the column where " _
& "the criteria can be found.", Title:="CONDITIONAL ROW DELETION COLUMN NUMBER", Type:=1)
I am wanting to run an insert row macro and it prompt me asking what column I want to reference. Whenever there is a change in that column, insert a row.
View 4 Replies
View Related
Mar 12, 2008
I wanted a macro to insert (the number of rows from Input box) below the active cell. Searching the forums, I found the following code.
Sub InsertRows()
Dim Rng
Rng = InputBox("Enter number of rows required.")
Range(ActiveCell.Offset(1 0), ActiveCell.Offset(Rng, 0)).Select
Selection.EntireRow.Insert
End Sub
If I enter a number it works fine, but if you click on the cancel button or the X to close the Input box, I get a Run-time error (13: Type mismatch). If you enter zero, it inserts 2 rows above the active cell.
I tried to modify another macro, I found on the site, that inserts rows and copies the row above, but always get the Message Box "You didn't specify a range!"
Sub InsertNumRows()
'
Dim Rng As Range
Application.DisplayAlerts = False
On Error Resume Next
Rng = InputBox("Enter number of rows required.")
On Error Goto 0
Application.DisplayAlerts = True.............................
View 9 Replies
View Related
May 13, 2014
I have the code below. That code call some InputBoxes in sequence, that be filled with correctly information like name, cell phone, date of purchase, etc. (sheet is in Portuguese)
But I want to give a function for 'Cancel' Button, because actually if we click on cancel Button, the macro skip to the next inputbox.
I want to click in Cancel Button, and Exit Sub, I used this Tip for example
[Code] ....
But if we do not fill the Text field, the Macro Exit Sub Too
Some fields are optional, so for this i search for a solution
Click in Cancel Button and Exit Sub
[Code] ....
View 5 Replies
View Related
Jun 30, 2009
I have the inputbox so i can set a string value,
When the inputbox Cancle button is pressed i want to exit sub,
If the inputbox value is nothink and ok button, I want the msgbox displayed then goto newname.
If the inputbox has a value do >>>>>>That>>>>>
View 6 Replies
View Related
Jun 3, 2009
I have a macro that takes input from the user and replaces certain text on several worksheets. One of the inputs is a username in the format of firstname.lastname. I need to manipulate this input such that the dot is removed and the first twelve characters only are used, all in upper case. e.g. Michael.Jackson would become MICHAELJACKS
I know how to use cells.replace to replace the text but I don't know how to use a formula to manipulate the inputbox text before I do the replace.
View 4 Replies
View Related
Sep 24, 2008
I can't seem to make user-defined format that puts a text in front of a number and/or a text.
Let's say I have A1: 13, A2: texttext A3: text7 and I want to format a lot of cells to "Ilike 13" / "Ilike texttext" / "Ilike text7"... ie add the same text in the front of the cell, no matter what the content is.
I did manage it seperately, with "texttext" @ for text and "texttext" # for numbers, but what's the general one?
View 12 Replies
View Related
Jun 10, 2014
I've create an userform with 2 textbox and a command button.
The user is allow to paste an article into textbox1, when they clicked the button, it should be able to find a specific text string in the article, then right after that text I want to insert addition note and a new article with notes will be generated in textbox2.
Currently i stuck on how to insert the note after the specific text string?
View 1 Replies
View Related
Aug 13, 2013
Got a slight problem; I am making a "worker-plan", where you should be able to write a name on one file and have it updated (removed) from the equivalent columns on another file automatically. Here's an example with two separate projects:
Project 1 before and after changes:
Attachment 257366
Attachment 257367
Project 2 before and after changes:
Attachment 257368
Attachment 257369
You can see here how I intended it to work. When one worker is moved from Project 1 to Project 2, that worker should also be removed from those weeks in Project 1. The previous worker from Project 2 should also be removed from those weeks (in Project 2).
Are there any formulas that can make this work automatically? All week numbers will belong to the same columns in all files.
Edit: There are 30 files that should be syncronized, not just two.. I could also gather all files into one file with sheets, instead of having seperate files.
View 2 Replies
View Related
Apr 14, 2014
All I want to do is insert a formula into a text box. This thread answers the exact same question but I don't understand how to highlight the text box as an object... [URL]....
View 2 Replies
View Related
May 9, 2014
Can the below code be modified to insert 2 sheets with the A2 value and specific text ("known" and "unknown")?
So if A2 is Paul Jones when the VBA is run a sheet Paul Jones Known, another sheet Paul Jones Unknown
[Code] .....
View 3 Replies
View Related
Jun 30, 2009
I need to enter text in a cell, then click on a command button that will run a macro to find that text in a column and if found, insert a row and copy down the formulas from the row above.
View 6 Replies
View Related
Dec 16, 2009
Simple question: Can an Excel Macro insert a line of boilerplate text under the last thing copied to a worksheet? I want to paste something into a worksheet, and add a message under it, and a blank line.
View 5 Replies
View Related
Feb 23, 2007
I would like to add a menu option that will run a subroutine to automatically add a formated text box to the worksheet at the selected cell location. The box must have the text centered, bold, underlined in Arial 10, and no border. I use this method to create a flow chart and would like to make it easier. At the moment I create three different text boxes and then copy them to the clipboard. Then I just click each one, drag it into position and edit the text. I tried recording a macro while adding the text box to the worksheet, but it didn't record anything except the cell selection.
View 2 Replies
View Related
May 31, 2007
I need a macro that will insert text into merged cells. I have merged blocks where all will be exactly the same size one after another. (there are 19 blocks). The problem is that each month the size of the blocks change.(see sheet for example). Right now blocks are 8 rows will get to 16 by end of year. In each block I need a "- (city) (Name)" Each block has a different city and name that goes with it.
It would be an awesome time saver If I could click a button and have the city and names be entered into the appropriate spot no matter what month were in.
View 6 Replies
View Related
Dec 12, 2008
I have some data in the form of text w/ 8 letters. I'd like to insert a hyphen after the third character. Is this possible using a formula to populate an entire field? Example:
Current format: ABC01234
Desired format: ABC-01234
View 3 Replies
View Related
Jul 21, 2009
I am trying to make some drop down boxes, but it seems a little different than word. In word I create the driopdown box and insert the text that I want on the list. I can't seem to do this in excel. For example, I have a cell that is labled RANK, and below it, I want the drop down box to have the option AB AMN A1C and SrA. How can I create this? Once I found out, I think I can do the other combo boxes my self.
View 5 Replies
View Related
Oct 13, 2009
I have a cell (B4)that may contain several different text values, i.e. Bill, Tom, John, Mike, Larry, & Dan. The value in cell D4 needs to relate to what text is in B4, i.e Bill = 6; Tom = 12; John = 8; Mike = 20; Larry = 15; & Dan = 10. I was trying an IF statement, but having trouble.
View 2 Replies
View Related
Feb 11, 2010
I am trying to setup a variable from a dropdown selection box. Basically, If "Completed" is selected in the box, current date is set in the corresponding field.
The formula I have tried is:
=IF(F5="Completed",G5="",G5=NOW())
I have a variable string setup opposite of what I am going for that works:
=IF(AND(D5<>"Assigned",D5<>""),IF(E5="",NOW(),E5),"")
So if anything is showing other than assigned the date is input. But have not been able to reverse this for the desired output.
View 2 Replies
View Related
Apr 24, 2014
I have Combobox on sheet which is filled with list of time intervals (text). If I select item from combobox, I want this time interval to be splitted as text and fill one cell with start time, and other with end time - so that I could calculate time difference.
I guess this could be done by inserting formula in this start/end time cells, like :
[Code] ....
and
[Code] .....
I'm doing this to allow user for picking commonly used time intervals from Combobox, but also to enter other start/end time in cells for that. I cannot do that without VBA, but I don't know how to do It in VBA.
My time intervals in Combobox are all in this text format, example:
[Code] ....
How can I do that ? I can also post a sample worksheet !
View 1 Replies
View Related
Aug 15, 2014
With "sheet1" there's a table c14:m38 with all formulas. But i want to expand the table if cell c38 contains a value or text.
Is it possible to automaticly insert a row containing the above formulas in row c14:m14?
View 12 Replies
View Related
Mar 4, 2008
Sheet1 has 500+ rows and 30+ columns of data, sorted by text in column G (last name). I want to create a data input sheet for users to manually key in data. I need help to create a macro to cut and insert the row from the data input sheet into Sheet1 - the first row after it finds a match in column G. The text in G can only be one of ten different "last names".
It needs to be after the first event because of graphing from the data sheet.
View 12 Replies
View Related
Nov 25, 2008
I have a button that will create tabs based off of information from a text box and now I want to select one sheet and insert text into certain cells so when they create a new tab information that is generally going to be there is autogenerated. I have an example of my code below. Please point me in the right direction cause I cant find anything really helpful that I havent tried. Everything is under the "gateway" then "New tabs" and PBG-Activity list is the only one with this macro.
View 2 Replies
View Related
Dec 1, 2011
I have a spreadsheet with about 10,000 lines/rows of text and I want to insert 4 lines/rows under each of these. way to do this efficiently without having to insert under every line/row?
View 9 Replies
View Related
Jan 9, 2008
I have a list of numbers say in column A, but when the number "41", "25", "90", or "92" is in that column, I want a text message to print 6 columns to the right of it (same row) that says "service".
View 9 Replies
View Related
Aug 21, 2008
how i insert text box on excel sheet.
In which i take values from user and then manipulate those values on click event of button.
View 14 Replies
View Related
Mar 12, 2008
I have an excel sheet that looks like this:
IMAGE 1
(The sheet holds more data but not needed for this)
I have two buttons; “BUY” and “SELL”
I need a vba-code that inserts either “BUY” or “SELL” in row 6 (buy/sell) and insert a text (code) in row 7 depending in this information. When I push either “Buy” or “Sell”
IMAGE 2
So.. When I push the button “SELL” (already made) the action “Switch” should get “Sell” and actioncode “SO”, and “Redem1” and “Redem2” should get “Sell” and actioncode “RA” and “RN”
So.. When I push the button “BUY” (already made) the action “Switch” should get “Buy” and actioncode “SI”, and “Subsc” should get “Buy” and actioncode “SA”
(When the button is pushed I have a autofilter that “hides” either all the “sell” or all the “buy”)
IMPORTANT: There is NO range!! the list goes on, and changes so I need it to work on x amount of rows. !
View 3 Replies
View Related
Aug 8, 2014
Is it possible to insert text an a cell value in conditional formating, i,e Ive got the conditional formatting:
=AND(H$4>=$B5;H$4<=$C5)
I want to insert this text whenever this condition is true once and not to repeay it:
="Load " &TEXT(G$5;"dd-mmmm") -- where G$5 is a vallue cell_
View 1 Replies
View Related
