I have a simple (working) UserForm for project data entry that I exported from one Workbook and imported into another. This UserForm contains a ComboBox that lists the local counties... this ComboBox has a RowSource that references a range on one of the Worksheets... the Worksheet name in the new Workbook is slightly different to that of the Workbook from which it was exported, so I went to edit the RowSource field in the ComboBox properties, but I get a "Could not set RowSource property. Invalid property value" error. Your thoughts on why I'm encountering this error message and why I'm unable to change the RowSource
I have several ComboBoxes & ListBoxes on a Userform that populate by referring to Dynamic Named Range in the RowSource property. Also on the Userform is an area to edit/add/delete items in these named ranges. If I Add or Delete an item, the Named Range does not automatically resize--or at least the Menus don't "resize" accordingly--unless I unload the UserForm and load it back up. Is there a way to refresh these Comboboxes without reloading the UserForm?
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
I've got a userform with a combobox and a textbox. The combobox is populated from a dynamic range of product numbers and when a existing number is selected from the list, a respective product name appears in the textbox. These are then saved to a database sheet via command button.
My problem is following:
When a new product number is entered in the combobox that isn't on the list, I want the number & name of the new product to be saved not only on the database sheet but also on the source sheet so that the new product would be included in the combobox list when run again. Here's my code so far:
Private Sub CommandButton1_Click()
'here is the code that saves everything to the database sheet
I am unable to reference the combobox's rowsource to another sheet dynamically The codes below are initialized when the userform is loaded. Is there anything wrong with it?
Normally the combo box will reading the data range from top to bottom. Is there any way to allow the combo box to reading the data from left to right? when i cover, it only reading the first cell of data range.
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB: Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then [valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
I have some code that sets named ranges based on sheet names defined by the user.
Issue is, sheet names allow characters that range names do no (i.e. #, - etc).
Is there a relatively simple way to clean a sheet name to allow it to be used as a range name.
Code example below. I am using Replace, but unsure how many characters are invalid. Unfortunately I am referencing a third party workbook, so no control over sheet names.
Sub test()
Dim sh As Worksheet, shnm As String, wb As Workbook Set wb = ThisWorkbook
VBA code. I think I need a worsksheet change event. Here is what I'm looking for:
If cell K1 = 3 and if the value of any cell in column A is < 80000 or is > 86666, or if the five digit number begins with an alpha, then a msg box will pop up stating "Invalid range".
More background: The user will be manually inputting 5 digit numbers into column A, but if they've selected cell K1 to equal 3 from a dropdown menu (which the user also does), then values entered that are less than 80000 or greater than 86666 are 'out of range', and the user should be alerted and if possible the number they entered gets cleared.
Additionally, some of the numbers the user could type in might begin with an alpha prefix, such as "G1234" - these would also be considered out of range when K1=3, so if the conditional statement could also recognize this it would be useful.
Column A will be blank until the user types in the 5 digit number, so the code only needs to trigger if the number typed into a cell in column A is outside of the aforementioned range.
So to sum it up once again, I'm looking for a msgbox (and clear cell) if the following criteria is simultaneously met- *If K1 = 3 (meaning that K1 equaling anything other than 3 wouldn't cause the msgbox) *And values typed in column A are less than 80000 or are greater than 86666, or begin with an alpha (meaning that values typed in between 80000 - 86666 wouldn't cause the msg box.)
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData() Dim counter As Integer counter = Sheets("Imported Data").Range("Counter")
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range. B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I have attached the file that i'm having issues with. On the userform, frmEditData, I have included a combobox (combobox5) that filters the different rows that show up in listbox1. once you click on an item in listbox1, it populates the rest of the form. This works for all the different filters, except when it is a date. An example would be clicking on Date of Loss in combobox5.
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using =OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using =OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range? For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names: Apple Orange Banana Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
I have four columns of data and 25 rows (A1:D25). I wish to add this to a multi-column list box in my user form. My userform is called FundSelect, and my listbox is called FundList. The ColumnCount property is set to 4. When I use the command: