Normally the combo box will reading the data range from top to bottom. Is there any way to allow the combo box to reading the data from left to right? when i cover, it only reading the first cell of data range.
View 8 RepliesI've got a userform with a combobox and a textbox. The combobox is populated from a dynamic range of product numbers and when a existing number is selected from the list, a respective product name appears in the textbox. These are then saved to a database sheet via command button.
My problem is following:
When a new product number is entered in the combobox that isn't on the list, I want the number & name of the new product to be saved not only on the database sheet but also on the source sheet so that the new product would be included in the combobox list when run again. Here's my code so far:
Private Sub CommandButton1_Click()
'here is the code that saves everything to the database sheet
If cboTuotenro.Value <> Range("Koodit") Then
ActiveWorkbook.Sheet("zval").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = cboTuotenro.Value
ActiveCell.Offset(0, 1) = txtTuote.Value
End If
End Sub
The problem is that I can't get the code to compare the combobox value to the range of product numbers.
I am unable to reference the combobox's rowsource to another sheet dynamically
The codes below are initialized when the userform is loaded. Is there anything wrong with it?
Private Sub UserForm_Initialize()
combobox1.RowSource = sheets("testing").Range("L2", Range("L65536").End(xlUp)).Address
End Sub
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
I've done define name to read column C until G in 1st row, N define another name from column C until G in 2nd row.For example; NameRanges for "Year" =OFFSET(Sheet2!$C$1,0,0,1,COUNTA(Sheet2!$1:$1)-2), for
"Thickness" = OFFSET(Sheet2!$C$2,0,0,1,COUNTA(Sheet2!$2:$2)-3)
I want to display list of year in combobox and then, when the user click on the first item in combobox, the textbox will display the value that correspond to the combobox. For example; when the user click Year = 1990 in the combobox, the textbox will take value from excel and display thickness for year 1990 which is 4.
This is my code, the code in UserForm_Initialize is working. unfortunately, coding to display value in TextBox1, doesnt work.
VB:
Private Sub UserForm_Initialize()
Dim rngYear As Range [code].....
I have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
I have a database and a user form. Lets assume the database hosts a list of all cities in North America in column C, with that city's state/prov. in column B, and in column A, that state/prov.'s country.
In the user form, the user will select from the available list in the first combobox either Canada or United States. Based on the selection from combobox1, combobox2's rowlist will contain only the states, or provinces, based on the filtered data. The database will be filtered based on column A, column B now shows only the states or provinces it the US or Canada is chosen respectively.
Based then on the selection in combobox2, the user selects from combobox3, only those cities found in that state or province ... information gathered from a filter of column A (country), column B (state).
Basically, with each combobox selection, the database is being filtered.
I have a UserForm with a ComboBox on it. The RowSource for this ComboBox is a named range called rInv. rInv has rows broken down by day and 105 columns broken down by items. The rows are broken bown to 31 day sections with 27 possible customer/Invoices per day. Most days have between 2 to 20 Customer/Invoices, which leaves anywhere from 7 to 25 blank entries per day. These blanks spaces won't allow the user to scroll past the 1st days Customers/Invoices!
Is there any code to remeve the empty spaces from being seen by the ComboBox RowSource? (I can't actually remove the spaces, they need to remain)
I wanted to retrieve data from horizontal cells to the combobox i created on the userform.
I tried watching some code from other progs, but its not working.
From my combobox1, I want to go read the data from the sheet "TMATERIAL", range "b3:h3"
I have a simple (working) UserForm for project data entry that I exported from one Workbook and imported into another. This UserForm contains a ComboBox that lists the local counties... this ComboBox has a RowSource that references a range on one of the Worksheets... the Worksheet name in the new Workbook is slightly different to that of the Workbook from which it was exported, so I went to edit the RowSource field in the ComboBox properties, but I get a "Could not set RowSource property. Invalid property value" error. Your thoughts on why I'm encountering this error message and why I'm unable to change the RowSource
View 7 Replies View RelatedI have several ComboBoxes & ListBoxes on a Userform that populate by referring to Dynamic Named Range in the RowSource property. Also on the Userform is an area to edit/add/delete items in these named ranges. If I Add or Delete an item, the Named Range does not automatically resize--or at least the Menus don't "resize" accordingly--unless I unload the UserForm and load it back up. Is there a way to refresh these Comboboxes without reloading the UserForm?
View 2 Replies View RelatedSimple transpose question: Lets say I have a verticle range of data from B3:B13. I wish to have code that will transpose that data into a horizontal range at D3:M3, is that possible?
View 5 Replies View RelatedI want to be able to return the value of the last non-blank cell in the horizontal range L3:BF3. This would need to account for any blank cells that might occur within the range. Those 'blank' cells would contain formulae and the non-blank cells would contain GCSE grades from A* down to U or National Curriculum levels in the format nx (e.g. 3a). I would need to be able to copy the formula down to other rows. The reason I'm not keen on an array formula is because they can slow things down, as I understand it.
I'm afraid I don't have a sample worksheet as this is all, for now at least, an emerging plan in my head. I should probably add that the grades will not necessarily increase in value in the range, so we're not looking for the largest.
I am trying to create a formula that will sum a range based on both horizontal and vertical criteria using the following data:
1
2
1
20%
25%
2
40%
25%
3
40%
50%
For example, if the horizontal criteria were "1" and the vertical criteria were "2", I need to sum the 20% and 40% amounts (60%). If the horizontal criteria were "2", and the vertical criteria were "3", I would need to sum the 25%, 25%, 50% (100%). I have tried using SUMIFS functions, but they do not appear to work with both horizontal and vertical axis criteria (I receive a #VALUE error).
I am trying to devise a formula for the data set below (into a different tab). The table below is something like what I have:
Day 1
Day 2
Day 3
Day 4
[Code]....
Though my table is a bit more complicated (it has empty rows in between and a much larger data range).
I need to reflect this in another tab in the following format:
Day 1
Day 2
Day 3
Day 4
Spoke 1
Spoke 2
Spoke 3
As I fill in data in the first tab, I would like this tab to automatically pick it all up. Is there any way I can do this? I may add rows etc. so I do not want a simple addition.
I recently switched to Excel 2010 and have a rather peculiar problem.Every week I update a bunch of charts in different workbooks. By update, I pretty much mean just shifting the range over one column or down one row to incorporate newly added data.
So I right click the chart, select "Select Data", update all the Data series ranges and then I click on the Horizontal (Category) Axis Labels button "Edit" to update the Axis label range.
I do all that then press OK. The data series have updated, but the axis labels haven't. So then I do the procedure again for the Axis Labels, hit OK again and voila: It worked.
But I ALWAYS have to do this procedure twice. It will NEVER update the axis labels the first time around. Even though the little preview window below the edit button show the labels correctly.
I have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
I have attached the file that i'm having issues with. On the userform, frmEditData, I have included a combobox (combobox5) that filters the different rows that show up in listbox1. once you click on an item in listbox1, it populates the rest of the form. This works for all the different filters, except when it is a date. An example would be clicking on Date of Loss in combobox5.
View 3 Replies View RelatedI have four columns of data and 25 rows (A1:D25). I wish to add this to a multi-column list box in my user form. My userform is called FundSelect, and my listbox is called FundList. The ColumnCount property is set to 4. When I use the command:
View 4 Replies View RelatedI'm trying to find out how to put my database in a separate workbook and still be able to access it with a listbox.
View 9 Replies View RelatedWhy is it when i try adding items to my listbox it comes up with the error Permission Denied. Im using rowsource just to have a heading tho when i want to add items it come up with the error.
Note my headings are in "K2:M3"
Eg.
With Me.ListBox1
.ColumnHeads = True
.RowSource = "K3:M3"
End With
then i try adding an item with
me.listbox1.additem Test
i get the permission denied error.
I have a group of data within a worksheet that I would like to search through one column called "User" and display multiple results from a column called "Full Description" and place these in each row of a listbox on a userform.
For example the data on the worksheet would be:
User
Full Description
Bob
Text1
Tim
Text2
[Code] .....
On the userform I have one Combo Box in which you can select a user to search, and a listbox displaying the relevant data or "Full Description".
For example searching for the user "Tim" should return the following results on the userform:
ComboBox (Search Term)
Tim
ListBox (Results)
Text2
Text4
Text5
When the results are then displayed, the user can then select an individual description that opens another userform displaying further details of that transaction.
I have tried to sort the data within a pivot table, however struggled aligning the columns with the data, as you cannot place text values in the "Values" section of the pivot table.
I have managed to get it to a point like this however, which I think may be a start... I'm just not sure what to do next.
Pivot Table
Row Labels
Full Description
Bob
Text1
Text6
Tim
Text2
Text4
Text5
Mark
Text3
Is there anyway to use this data to fill my listbox? It would need to update itself every time a new transaction has been recorded, also the rowsource of each user may change. For example User "Tim" may gain an extra row on the pivot table, so I can't just name a static range and use that as a rowsource.
I would imagine I need to perform a Vlookup for the user, display any results in Column B, up until a new name is found in Column A?
How can you make a ListBox RowSource show only visible data from a filtered range and then when the filtered range changes with new filter criteria, show the new visible data?
I Have a Defined Name Range named “Quantity” with the ....
I found that my listbox in userform cannot update automatically(instead it change to blank) when a new data is insert to the target cell which is rowsourced to the particular listbox. But when i close and reopen the userform, the data which i added just now appear in the listbox.I rowsource the listbox from its properties, the command are: 'sheet1'!A2:E5.
View 4 Replies View RelatedI have listbox with 1 column source range B6:B25
Some time I want to remove some items before print is there possible to remove such item from listbox as well as corresponding cell without deleting row
I have three listboxes and I set each of their row sources from code in UserForm_Initialize() event like so:
With Sheet1
lbxLanguages.RowSource = . Range("C2", .Range("C2").End(xlDown)).Address
End With
When I run the form, sometimes I see data in two of the three listboxes and the third has blank/empty rows; sometimes all three listboxes have only empty rows in them (i.e. correct number of checkbox squares displayed but no data in front of the squares).
I need to make an userform which can look up data from a sheet that contains a list of distributors and adresses.
I need to be able to search by:
1- postal code
2- postal code and product reference
Hence, I have 2 textboxes for inputing the postal code and the reference, and a listbox that I would like showing the distributors' names that are localized in the corresponding area and which did buy the product from us. Here's what my database sheet looks like:
Postal Code
Products
Distributor
Adress
[Code].....
What I don't know how to do is to have a variant Rowsource property for the listbox, according to the postal code and the product reference the user enters, plus I want one distributor's name to show only once in the case I'm only searching by postal code.
Is there any other way to get data from sheet other than using rowsource because the data retrieved is going to based on the selected sheet's name since there are a lot of sheets .
example :
When i enter number 1234 inside the textbox to search, the data from cells in sheet 1234 will appear inside the listbox.
I have a ComboBox(mnthComboBox) on a userform. I would like to populate the RowSource using VBA Code. I have searched this forum but have been unable to find what I need.
View 4 Replies View RelatedI have some problems in VBA Excel List Box which I want to rectify. See an attachment " listbox. zip" file
I craated a Userform and Seven List boxes in it. the following problems I am facing.
1) When I change List Box 1 other List Boxes do not show with related data.
2) List Box 1 and List Box 2 show their header others List boxes not. Why?
3) I have defined Names of all ranges. How Can I use it in VBA Coding?