Combobox Addition To Rowsource In Dynamic Named Range Corrupting Table
Aug 10, 2014
My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.
No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.
The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)
debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.
I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.
View 4 Replies
ADVERTISEMENT
Oct 25, 2007
I am unable to reference the combobox's rowsource to another sheet dynamically
The codes below are initialized when the userform is loaded. Is there anything wrong with it?
Private Sub UserForm_Initialize()
combobox1.RowSource = sheets("testing").Range("L2", Range("L65536").End(xlUp)).Address
End Sub
View 3 Replies
View Related
Oct 8, 2013
I'm trying to add a dynamic named range to a combo box in Userform but getting this error.
Have tried several lines of code this being the last that hasn't worked . . . .
Code:
CustCBx.RowSource = Range("CustList").Value
This is the formula for the named range in sheet
Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))
View 1 Replies
View Related
Mar 4, 2008
I have a simple (working) UserForm for project data entry that I exported from one Workbook and imported into another. This UserForm contains a ComboBox that lists the local counties... this ComboBox has a RowSource that references a range on one of the Worksheets... the Worksheet name in the new Workbook is slightly different to that of the Workbook from which it was exported, so I went to edit the RowSource field in the ComboBox properties, but I get a "Could not set RowSource property. Invalid property value" error. Your thoughts on why I'm encountering this error message and why I'm unable to change the RowSource
View 7 Replies
View Related
Jan 4, 2007
I've got a userform with a combobox and a textbox. The combobox is populated from a dynamic range of product numbers and when a existing number is selected from the list, a respective product name appears in the textbox. These are then saved to a database sheet via command button.
My problem is following:
When a new product number is entered in the combobox that isn't on the list, I want the number & name of the new product to be saved not only on the database sheet but also on the source sheet so that the new product would be included in the combobox list when run again. Here's my code so far:
Private Sub CommandButton1_Click()
'here is the code that saves everything to the database sheet
If cboTuotenro.Value <> Range("Koodit") Then
ActiveWorkbook.Sheet("zval").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell.Value = cboTuotenro.Value
ActiveCell.Offset(0, 1) = txtTuote.Value
End If
End Sub
The problem is that I can't get the code to compare the combobox value to the range of product numbers.
View 9 Replies
View Related
Mar 17, 2008
Normally the combo box will reading the data range from top to bottom. Is there any way to allow the combo box to reading the data from left to right? when i cover, it only reading the first cell of data range.
View 8 Replies
View Related
Nov 8, 2006
I have several ComboBoxes & ListBoxes on a Userform that populate by referring to Dynamic Named Range in the RowSource property. Also on the Userform is an area to edit/add/delete items in these named ranges. If I Add or Delete an item, the Named Range does not automatically resize--or at least the Menus don't "resize" accordingly--unless I unload the UserForm and load it back up. Is there a way to refresh these Comboboxes without reloading the UserForm?
View 2 Replies
View Related
Aug 21, 2014
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
View 11 Replies
View Related
Nov 27, 2012
I have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
View 8 Replies
View Related
Feb 10, 2012
I have a database and a user form. Lets assume the database hosts a list of all cities in North America in column C, with that city's state/prov. in column B, and in column A, that state/prov.'s country.
In the user form, the user will select from the available list in the first combobox either Canada or United States. Based on the selection from combobox1, combobox2's rowlist will contain only the states, or provinces, based on the filtered data. The database will be filtered based on column A, column B now shows only the states or provinces it the US or Canada is chosen respectively.
Based then on the selection in combobox2, the user selects from combobox3, only those cities found in that state or province ... information gathered from a filter of column A (country), column B (state).
Basically, with each combobox selection, the database is being filtered.
View 1 Replies
View Related
Apr 21, 2006
I have a UserForm with a ComboBox on it. The RowSource for this ComboBox is a named range called rInv. rInv has rows broken down by day and 105 columns broken down by items. The rows are broken bown to 31 day sections with 27 possible customer/Invoices per day. Most days have between 2 to 20 Customer/Invoices, which leaves anywhere from 7 to 25 blank entries per day. These blanks spaces won't allow the user to scroll past the 1st days Customers/Invoices!
Is there any code to remeve the empty spaces from being seen by the ComboBox RowSource? (I can't actually remove the spaces, they need to remain)
View 9 Replies
View Related
May 23, 2007
'i use a combobox in a userform to show data from a hidden sheet its name is sheet5(sheet1).
'i defined the Range as ExpCat and put ==OFFSET(Sheet1!$M$3,0,0, COUNTA(Sheet1!$M3:$M9),1)
'and use this code to view the data, but the code shows the data of the activesheet.
Private Sub ComboBox1_Click()
Me.ComboBox1 = ThisWorkbook.Worksheets(5).Range("ExpCat").Value
'Me.ComboBox1 = ThisWorkbook.Sheet5.Range("ExpCat").Value
End Sub
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Jun 16, 2014
I want to make simple Combobox with two dropdown lists throwing me back cells values, but I never made that so I've got a little difficulties.
The sample combobox should look like this:
Clipboard01.png
For the left Dropdown list there's defined name of the range "ITEM1", and for the second - range named "ITEM2".
After user will choose something I want to have numbers of the items selected from the lists in cells "A1" and "A2", and run a macro after clicking OK. How can I do this?
View 1 Replies
View Related
Jan 9, 2007
I use
Set rnData = ActiveSheet. Range("ProductList")
vaData = rnData.Value
With Me.model
.Clear
.List = vaData
.ListIndex = -1
End With
to populate a combobox list. 'ProductList' is a Dynamic Named Range with the definition
=OFFSET(Stock_List!$L$2,0,0, COUNTA(Stock_List!$L:$L)-1,1)
The '-1' allows for a heading at the top of the column.
This works fine when the list in col. L has more than one entry under the heading. But with only one entry I get 'Runtime error 381 - Could not set the List property, Invalid property array index' and the debug highlights on
.list=vaData
View 9 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Dec 30, 2008
I need to create a dynamic named range called "DIVLOC," that corresponds to a sheet called Divloc_List in the workbook. Then, I need to take this range and perform a vlookup against it. I tried to create the range in the sheet itself (it wasn't dynamic), and then used that in the vlookup in the vba code, but I got error 2402 (I think). I'm not sure how to define the dynamic range in vba code, and then use the range in the vlookup.
View 9 Replies
View Related
Jan 4, 2009
what would cause the formula for a dynamic named range to keep changing on its own? I enter the following formula:
OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!D:D),1)
Which I save and somehow gets changed to the following formula:
OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!XFD:XFD),1)
This is happening to several named ranges I created. I’ve tried to correct this by editing the formula which seems to work but changes again. I’ve also deleted the named range and recreated it with the same change process taking place.
In case it matters the named ranges are being created on a table imported into Excel via MS Query.
View 9 Replies
View Related
Nov 6, 2009
I am trying to create a dynamic named range to select a list of text entries from a number of different columns that I am using for Data Validation. The columns have entries of variable length, none more than 30. What I am seeking to achieve is that having selected a heading in cell C3 the available list in DV dropdowns elsewhere are governed by the contents of C3.
I have created a defined name, StartPos that uses the contents of C3 to evaluate to the cell reference (e,g $H$4) of the topmost cell in the relevant column. However when I try to use it in the usual formula
=OFFSET($A$1,0,0,COUNTA($A:$A),1) formula I try
=OFFSET(StartPos,0,0,COUNTA(StartPos:[ ],1)
I get stuck at what to put in the brackets. Ideally I would like to use the COUNTA to go down to the last entry in the column. However, even when I try to give the range a height of 30 rows:
=OFFSET(StartPos,0,0,30,1) I still get an error.
View 9 Replies
View Related
Sep 13, 2007
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
View 9 Replies
View Related
Feb 4, 2014
I am trying to work up a referral tracker for my wife's employer. I have Named Ranges on sheet 2, a running log on sheet 1. I also have a userform that is being populated from the ranges on sheet 2. I have the project mostly functional, except for a feature I would like to add in. I am interested in adding to the named range that is being accessed if the entry is not in list, via the combobox1 on the userform. Also, if possible, I would like the list to re-sort behind the scenes so the added entry is properly located in A-Z format for next time. After searching the web a bit, I found some code that might work with some tinkering, but currently I am having issues with it. Here is the bit I am trying to use.
[Code] ....
I have been getting 424 Object Errors and a few others as I continue to mess with this. I am also attaching the project if someone may see a better way of getting the task accomplished. The overall scope of this is to log all referral sources so monthly and yearly reports could be made.
Attached File : Copy of Referal Tracker.xlsm‎
View 3 Replies
View Related
Nov 21, 2013
i have a combobox(form control) that has its listfillrange property equal to a range("A1:a10") on sheet1. The combobox allows for user entry and i am trying to create code where it adds the value entered in the combobox to the range("a1:a10) on sheet1 if its not already within the list. Then set the last value used as the listindex of the combobox.
View 2 Replies
View Related
Jul 20, 2007
how to control the contents of one combobox based on the selection made in another combobox. But, for some reason, ComboBoxTime1 (as shown in the code below) will only display the first item in the Dynamic Named Range when the user clicks on the pull-down arrow. The Named Range is consistent in size (4 cells) for each of the selection options in ComboBoxDay1. why only the first of four options are displayed in the second combobox?
Also, when a selection is made in the first combobox, the second combobox immediately displays the first item in the Dynamic Named Range (the one selection option it allows). I would prefer for it to remain blank until the user has selected an item from the pull-down list.
Private Sub ComboBoxDay1_Change()
Dim strRange As String
If ComboBoxDay1.ListIndex > -1 Then
strRange = ComboBoxDay1
strRange = Replace(strRange, " ", "_")
With ComboBoxTime1
.RowSource = vbNullString
.RowSource = strRange
.ListIndex = 0
End With
Else
LblTime1.Caption = "Time 1:"
End If
End Sub
View 3 Replies
View Related
Jun 18, 2013
I want to create a charts on a pivot table, but I don't like the way Pivot charts function and the limitations they have.
So I want to create a normal charts that is dynamic and based on a pivot table.
In order to do so, I want to create dynamic named ranged for the data in the pivot table to use for the data series for the chart.
I can reference the week numbers (headers in the pivot table) for one data series and get the data by this formula:
=OFFSET(Weekly!$C$15,0,0,1,COUNTA(Weekly!$14:$14)-1)
$C$15 is the first cell that holds the data for the series.
Row 14 holds the week numbers (headers in the pviot)
However, I want to make that formula even more dynamic by having it reflect the changes done to the pivot table who's cells it references to.
So how do I do this using the GETPIVOTDATA function? (or some other function that makes it dynamic and reflect changes done to the pivot table and accounts for the row numbers with the data can change)
If I generate the GETPIVOTDATA formula and try to substistute the fixed cell reference for $c$15 with it, the OFFSET formula for the dynamic range gives an error.
And how can I grab the column headers (week number) dynamically?
View 1 Replies
View Related
Feb 25, 2014
I am doing an Advanced Filter, and I am using a named range in my VBA code that decides the Criteria range.
The dynamic named range is called 'Criteria' and this is the code:
VB:
=OFFSET(Sheet1!$A$2,0,0,Sheet1!$BZ$23,41)
However, when I run the VBA code, although it works perfectly, afterwards the named range has changed to:
VB:
=Sheet1!$A$2:$AO$3
I just want this to remain unchanged, as it works great. This is my VBA code:
VB:
'Filter and send data to new sheet
Sheets("Sheet2").Select
Cells.Select
[Code]....
View 4 Replies
View Related
Jul 23, 2014
I know how to create a dynamic named range so that no blanks appear in my data validation list but have only ever done this for a list in a column, i.e...
-----A-----
1--Apple
2--Orange
3--Pear
4--Bannana
5--
6--
A1:A6 would be named Fruit, then name manager, edit: =OFFSET($A$1,0,0,COUNT($A1:$A6),1)
The Data Validation list then shows Apple, Orange, Pear, Bannana. And if I add Peach into A5 later, that then appears in the list.
What I need though is to edit this as if the named range 'Fruit' covers cells A1:F1.
------A---------B-------C--------D-----------E-----------F
1--Apple---Orange---Pear---Bannana---
2--
View 7 Replies
View Related
Mar 4, 2014
create a dynamic named range with dates.
Example file. !
Dynamic-test-sheet.xlsx
I need an dynamic named range for column B(Project) with a date criteria.
so for example: I need a range with all records from Colomn B(Project) from year 2013.
I want to use this range to filter all unique projects by year.
I have already a filter/formula to collect a unique list of all projects.
View 9 Replies
View Related
Aug 16, 2013
I have a named range in a column for January data (non-contiguous cells). Every month I insert new data in the column to the right. Is there a way to have a dynamic range that grabs the same exact cells but in the new column but unselects the previous month data? Spreadsheet attached.
View 1 Replies
View Related
Dec 13, 2009
In the attached workbook, I have identical sets of data in column A separated by an blank cell. I need a macro for the user form that i need to build. The code needs to find the end of each named range, (Range1,Range2 and Range3), to insert blank row at the end of each range and to copy the value of the textbox from the user form in each row so to keep the sets of data identical.
View 9 Replies
View Related
Jan 13, 2010
My file has a code that refers to a dynamic named range. When I run the macro that range gets corrupted and I cannot figure it out why. before the macro the named range refers to:
=OFFSET(Manager!$A$1,0,0,MATCH("*",Manager!$A:$A,-1),3)
and right after I run the macro it turns to:
=OFFSET(Manager!#REF!,0,0,MATCH("*",Manager!$A:$A,-1),3)
View 2 Replies
View Related
