I am trying and failing to use this
If (IsError(Application.WorksheetFunction.Match(StartAT, GradeArray, 0))) Then
StartAT is a text string that might be blank or a space or other invalid entry, GradeArray is a table which I am using to get a numeric value from a valid text entry. If the entry is invalid then I will use a value from an adjacent cell. The problem is that I get the 1004 error.
I'm trying to run a match function combined with If and Iserror. I need this because I want to see if a given item number in one cell in one sheet in excel is ALSO located in a given range in another excel sheet. If that number is found, I want the result to say "yes". If the item number is NOT also found in the given range in the other workbook, I want it to say "no". This is what I have so far:
=IF(ISERROR(MATCH($C9,'Case Usage Summary'!$A$2:$A$45138,0))=FALSE,"Yes","No")
The problem so far is that this is actually giving me the wrong results. For instance, the above function attempts to located cell C9, denoted as item number 964, in another sheet called Case Usage Summary in the range between A2 and A45138. If it could find 964 in that range in the Case Usage Summary sheet, it should give an answer of "yes", if it couldn't then it should give an answer of "no". The problem is that it gave me an answer of "no", but I just looked through the list of item numbers in the case usage summary sheet and there IS in fact a item number 964 entered in the range. What is going on here? I tried this for some of the other cells, and it is just giving me "no" for all of them. What is going on?
I am wondering if you could please help me with the below code I have.
View 9 Replies View RelatedI'm having trouble with an iserror statement in part of a procedure I've been writing. This macro uses vlookup often, and will occasionally have errors so I have been trying to use the iserror function to trap them. The code is as follows: ....
View 9 Replies View RelatedHow do I use the ISERROR function on a range. I have tried =ISERROR(A1:A10) but this doesn't work, it always gives the "true" output even if there is no error in that range.
View 4 Replies View RelatedHow do I translate this to a vba code?
=INDEX('Workers List'!D3:D13,MATCH('Workers List'!C4,'Workers List'!C3:C13,0),1)
what i have done is
test = Application.Index(Sheets("Workers List").Range("C3;C13"), Application.Match(1, Sheets("Workers List").Range("D3:D13"), 0), 1)
But i keep getting an error, may i know whats wrong with it?
Application. ScreenUpdating = False
For FormulaRemake = 2 To 2000
Worksheets("Data"). Range("D" & FormulaRemake).Formula = ""=If(ISERROR(Data!W"" & FormulaRemake - 1 & "")"" & ""=True,"",Data!W"" & FormulaRemake - 1 & "")""
Next
Application.ScreenUpdating = True
I'm having troubles with the syntax for the .Formula part. I read that when you do this you're supposed to double quote everything, except if you need a "" in it...?
Should look like this when done right: =IF(ISERROR(Data!W1)=TRUE,"",Data!W1) Also is there anything besides ScreenUpdating that will make this code run faster?
I am trying to used match function in the code but I am getting the following error:
Run time error '1004'
Unable to get the match property of the worksheet-function class
Here is the
I’ve created a small user form to convert food measurements.
My problem is the code is bugging out at the Function I made to do the calculations
I receive :
“Runtime Error 1004”
Unable to get the Match Property of the Worksheet Function Class”
This is the function code.
You may want to explore the file to see if I ‘ve it set up incorrectly.
I am converting Excel Templates which were developed in office 97 to Excel 2003.The templates are running fine in office 97 ,but when I run the same template in off 2003 I get the error "Run time Error Code 1004 : Application or Object Defined " and when I tried to debug the cursor is pointing to a cell which contains a formula which add multiple cell values.Can any one throw some light on this why the template which works fine on office 97 is not working in office 2003?
View 11 Replies View RelatedI have some code I have created to set page breaks. Depending on a previous option, my report will be either 3,6,9,12, or 15 pages. The info on each page varies in length, but I use table headers to separate the data onto different pages so none of the tables are split into more than one page.
My problem when the code gets to a certain line, it gives me error 1004. I will hit "Debug", then I hit continue and the code finishes. I don't understand why I am getting an error on this line, and why I don't have to fix anything to get it to finish running.
Here is the
I wrote the below code, the error seems to be occurring on the ActiveSheet.Name line. At this line the debugger is giving the runtime error.
Sub ListWorkSheetNames()
Dim Sheetnames
Sheetnames = Sheets.Count
Sheets.Add
ActiveSheet.Name = 'SheetList'
Sheets(SheetList).Move after:=Sheets(Sheetnames + 1)
For i = 1 To Sheetnames
Range(A & i) = Sheets(i).Name
Next i
End Sub
Sub paste()
' paste Macro
' Macro recorded 2/20/2009 by lawryad
Range("A" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.paste
ActiveSheet.paste
Application.CutCopyMode = False
ActiveSheet.Range("p1").Copy
ActiveSheet.Range("a1").Select
End Sub
Now everything works good with this code unless there is nothing copied to paste. In that case it will go to a "run-time error'1004' " I would like instead for a msg box to appear saying "You must copy required data first"
I want to place a message in cell
Sub OutOfStockDate()
templateSheet.Range("B15").value = dataSheet.Range("G5").value
If dataSheet.Range("G5").value = "" Then
templateSheet.Range("B15").value = "There is no Out of Stock Date"
End If
End Sub
However when I run this code I get the infamous 1004 error.
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedI've noticed error 1004 is very broad and switches its name depending on what you're working with. But I have no idea what it means.
This is the line w/ probs:
Sheeti.Cells(y, 2).Value = WorksheetFunction.DGet(InventoryRange, 3, CriteriaRange)
I looked at protection and Macro security and checked my definitions (that work in other contexts).
Does DGET need to have criteria and database in the same worksheet? My project is working between two workbooks.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
I am trying to use the Left function in my VBA code but continue to receive run time error 1004 - Method 'range' of object '_global' failed. Not sure if the error originates for code being written incorrectly or if the left function is not available in VBA. I am basically trying to take the first 9-characters for each cell in column K and copy the values to column G.
View 3 Replies View RelatedThis piece of code runs perfectly on its own but when called at the end of another code it fails and I haven't a clue why. The reference wsTmp is dim'd globally and defined in the main component where it is simply - worksheets("somename")
Run-time error '1004':
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank.
Private Sub FinalSort()
wsTmp.Cells.Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:=Range("A2") _
, Order2:=xlAscending, Key3:=Range("K2"), Order3:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, DataOption3:= _
xlSortNormal
End Sub
Another interesting dilemma to solve. Using this formula:
View 2 Replies View Relatedlet me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I'm trying to use match function to find the max value that is less than a given value. look at my file. I think it should return F as the value, why is it returning G?
View 11 Replies View Related=MATCH(9.999999E+307,B12:Y12)-1
=MATCH(9.999999E+307,B18:Y18)-1
So what is this pulling and how does it change depending on the data?
I'm using the match function to tell me in which column the first positive/non-zero number appears. However, the formula is returning the # of columns in the range. Here is what I'm using:
=MATCH(1,H6:CA6,TRUE)
I'm getting 72 back as a result, which is the number of columns between column H and CA.
Any ideas why this is the case?
I have the below code sent in by a MR Excel forum user
Public Function BigMatch(rngIndexColumn As Range, varMatchValue As Variant, rngMatchRange As Range) As Variant
Dim lngCol As Long
Dim rngCell As Range
lngCol = rngIndexColumn.Column
For Each rngCell In rngMatchRange
If rngCell.Value = varMatchValue Then
BigMatch = Cells(rngCell.Row, lngCol).Value
End If
Next rngCell
End Function
when using the BigMatch Function = BigMatch(any cell in the column you want to pull from, the value you want to match, where you want to find that value)
I am using 2 different sheets, Technology & Lessons learnt: when I try the BigMatch Function
=BigMatch(Technology!C17,'Lessons Learnt'!A46,Technology!W17:AD27)
Instead of returning 'Technology'!C17 its returning the value from Lessons Learnt C17,
Lets say the cell I'm working on is D3
D3 = A1+A3+A5 (It's a formula, and sometimes it returns "#VALUE")
I want cell D3 to have a formula and if the result in D3 ISERROR, put a value of 1 there.
I'm running into Circular Reference, and don't know how to do it ....
I have a very long function I created. But I need to edit it in a matter I have never done before.
Below is my function and i will like to add a new condition to it.
IF the text value in cell C7 is equal to any text value in Workbook2 B10:K10 and the value underneath that cell (I.e if B10 then B11 etc..) is Deleted then I want to have one of the conditions of my function below display "Deleted".
=+IF(AND(E7<=0,J7<>0,Y7<=0,AO7<=30),"Check Inventory",IF(AND(E7<=0,J7<>0,Y7<=0,AO7>=60),"Delete Listing ",""))
Using the address function to find the exact cell of a unique string text.
I'm using the following command to find the address of a string i have in a different cell.
=ADDRESS(MATCH("*$H$1*",A:A,0),1)
The string text is in cell H1, H2, H3.......(or on another sheet). The goal is to find the address of a cell containing the unique string text from cell H1, H2, H3.....(that entire column) in a sheet with 13,000 lines. Basically, searching for a specific cell address of a string text referenced from another cell.