Largest And Smallest Sequences
Jan 12, 2009
I am using excel 2007 and I need help with the following if anyone would be kind enough. I have a dynamic array that consists of stream of 1's and 0's. I want to be able to find the largest sequence of 1's and the smallest sequence of 1's. So at a point in time the array mite be 111110001101111000 and I want to be able to dertermine the longest contiguous sequence of 1's. But as I say the array is dynamic and so I need to do that after each input.
View 8 Replies
ADVERTISEMENT
Aug 17, 2007
Is there a way to reverse a lookup function?
I have a s/s attached, basically B is like an output of figures after some calculations. And I am trying to find from largest to smallest values and then having column E reflect the Letter beside that number...
tried using match but messed up.
View 3 Replies
View Related
Jan 25, 2014
I want to find the largest and smallest value for a number... E.g.
68734 the largest value is 87643 and the smallest value is 34678
39823 the largest value is 98332 and the smallest value is 23389
43089 the largest value is 98430 and the smallest value is 3489
View 4 Replies
View Related
May 10, 2013
There must be something I'm doing wrong, because I have a list of numbers and when I select Data --> Sort --> Column G, I am not given the option of sorting "From smallest to largest". Only from "A to Z" or viceversa.
View 3 Replies
View Related
Feb 20, 2014
I'm trying to create a formula that will allow me to filter the dates from largest to smallest while having a text in the formula. Right now I'm using:
=K2-M2&" Days"
But the dates are all over the place,
View 3 Replies
View Related
Jul 1, 2008
I have a work document with multiple rows of information. In each row I need to locate the maximum and minimum values. (The rows aren't long - there are about 10 values in each). I then would like to turn the font of the lowest value in each row red - and the font of the highest value in each row blue. I would also like to be able to skip blank or unimportant rows.
View 2 Replies
View Related
Dec 5, 2013
I am looking for a formula that will output the highest and lowest value in a range. Column A contains a range of numbers, some of which repeat and in column B i'd like to extract ONE instance of the highest and lowest value in Column A, preferable the last instance.
See example below and in column B the desired output.
Column A
160
90
120
90
120
160
Column B
blank
blank
blank
90
blank
160
View 5 Replies
View Related
Jun 21, 2013
I am doing a macro that will access a specific sheet of my workbook, a specific table, and will sort the table according to the field "Nominal", from largest to smallest. I have tried with this but it doesn't work:
Sheets("F.C.SSA-View 2").Select
Application.CutCopyMode = False
ActiveWorkbook.Worksheets("F.C.SSA-View 2").ListObjects("F.C.SSA_View_2").Sort.
SortFields.Clear
ActiveWorkbook.Worksheets("F.C.SSA-View 2").ListObjects("F.C.SSA_View_2").Sort. _
[Code] ....
View 1 Replies
View Related
Aug 13, 2008
I am having some data running into 60 (C:BJ) columns and 200 rows. It is the record of dates query raised and answered with refernce to query number in the A coulmn. I have zero value as entry for the unused cells in this range due to some constraints. I need to find the smallest and the largest non-zero date in this range for analysis purpose. I plan to use the difference between these 2 dates to calculate turn around time for a query.
Problem is to find the smallest and the largest non zero date within range C6:BJ6 which would be used as input in the Networkdays formula.
View 9 Replies
View Related
Nov 4, 2013
See post below. I want to have the column listed as per to auto sort to the largest to smallest value. This value will change throughout time.
I have data in columns a-n and rows 3-14. I want column "l" or the 12th column to auto sort from largest to smallest value.
View 1 Replies
View Related
Jun 2, 2009
How would I return a cell reference (address) to a cell that contains the largest number in a list?
I tried using "Address(large....) where I get the correct column, but the returned row # is the actual value in the cell (the highest # in the list).
I eventually will want to delete the highest number to leave the cell blank.
View 3 Replies
View Related
May 15, 2008
I am trying to manually format a few graphs in my sheet. I, however, leave the major units of the axes to be automatically calculated. The code that I use is given below:
ActiveChart.Axes(xlValue).Select
With ActiveChart.Axes(xlValue)
.MinimumScale = Range("Min").Value
.MaximumScale = Range("Max").Value
End With
Now what this does is that it sets the maximum of the scale exactly equal to maximum of the range being plotted and hence a few parts of my graph overlap with the border of the plot area. Is there any way in which I can round the max and min scale of y-axis to the next highest and lowest major unit respectively or may be add and subtract a value proportional to the major unit of the y-axis. I cannot add a constant in the code given above since I that does not suite my requirements.
View 2 Replies
View Related
May 12, 2012
I have a table showing interest levels in training courses from a group of schools, eg:
English Maths Science
School1 3 4 2
School2 7 1 0
School3 3 2 5
I want to identify the column heading for the first, second and third most popular courses. ie for School1 the most popular course is Maths, second most popular is English and so on.
I have tried using the OFFSET function, which worked if I provided the cell location of the required value. I then looked at the ADDRESS function to provide the cell location: eg For School2 find the 2nd most popular course:
=ADDRESS(ROW(A3),COLUMN(data?)+MATCH(LARGE(B3:B5,2),B3:B5,0)-1)
But I have got stuck with what I should enter for COLUMN(data?) as I do not know in which column the second largest value is.
I am sure Excel has the required functionality.
View 12 Replies
View Related
Jan 14, 2010
I am using the following array equation to return the value in column 1 for the smallest 5 numbers. It works for small 1 and 3 but i get a #NUM! for 2 , 4 , and 5. The smallest 5 numbers are:
0
3.196408441
4.491972091
4.491972091
4.491972091
Equation:
=INDIRECT(ADDRESS(SMALL(IF((NumRange)=SMALL(NumRange,1),ROW(NumRange),""),1),1))
View 12 Replies
View Related
Sep 7, 2009
I am doing research and I have a list of over 100 small dna sequences that I would like to see if there are any similarities between them. I have put them in individual cells but I dont know how or what function to use.
View 11 Replies
View Related
Jul 18, 2006
I need to create a warning when specific values sequences are input from a
drop down menu. My example:
I have 31 columns (days in month) and have 25 rows (peoples names) from the
drop down box I have the following values-These are shift designations
(V1,V2,V3,V4, SV1,SV2,SV3,SV4, A1,A2,A3,A4,N,R1,R2,R3,DB,C).
If the selections in cell between B1:AF25 are either SV 1-4 or A 1-4 I want
a warning to appear IF a value of V 1-4, R 1-3, DB or C are attempted to be
put in the immediately following cell.
Example: Cell B3 has A-4 and in cel C3 they attempt to put N, then it
should give a warning "This is not a recommended shift sequence".
View 11 Replies
View Related
Nov 18, 2008
I have 70 sequences of binary coded variables each, which I would like to compare in terms of overlaps for the number "1", e.g.,
a1 1 0 0 0 0 1
a2 0 1 1 1 0 0
a3 0 1 1 0 1 0
.
.
.
a70 0 1 0 0 0 0
How can I do a pairwise comparison in Excel for the number "1" (ie how often does the number "1" occur at the same place for two sequences?).
I thought about a correlation matrix (that compares sequences a1-> a2, a1-> a3, a1->a4, ...., a1-> a70; a2->a3, a2-> a4, ...., a2-> a70; .....; a69-> a70), but am looking for an easy way to compute this in Excel.
View 6 Replies
View Related
Apr 1, 2007
I want to write a formula that counts sequences.
Details of Data:
Imagine you roll a 4-sided dice! The four sides of the dice are 1,2,3 and 0.
Sequence needs to be 5 in a row of either 1 and 2, 1 and 3 or 2 and 3. The 0 is to be recorded, but 'skipped over' in the sequence.
When a sequence of 5 occurs, there needs to be a count to record how many more times the missing number takes until it arrives. For example, if the sequence of 5 is 1 and 2, and the count will be to see how long it takes the number 3 to arrive.
View 9 Replies
View Related
May 8, 2014
I need to come up with a formula that will lookup a value in a table based upon a specified number sequence in another table and then add that value to another number/price that corresponds with that specified number sequence.
In the attached worksheet you will see that there are two groups of tables (A & B). I want to take the prices in group A in columns B:E and then add the values at the top of the page in columns G:J based upon specific numbers to the right of the decimal place in column A under "Rate".
So in the example at the bottom you will see that the first rate in column A is 5.125. Since the rate ends in .125 then it should be using the value of 2.57 from J2. So it should take the price in B27 (108.328) and add 2.57 to give you 110.898 in M27.
My problem is that the rate sequence wont always be the same and neither will the values in columns G:J. The only constants are that the rates will end in 1/8ths and the values will be based upon which 1/8ths they end in. For instance; In the example the rate range goes from 5.125 down to 3.75 but sometimes it may be 5.625 down to 4.25.
View 12 Replies
View Related
Mar 18, 2009
how to go about finding sequences and highlighting them.
here's an example list:
7600
7601
7602
7603
7604
7608
7609
7610
7611
now i need to find 3 things in this list.
1) how many 'batches' of sequences there are in this list. The numbers 7600 to 7604 are a consecutive sequence of five numbers followed by another sequence from 7608 to 7611. that makes two sequences. i need a formula for one cell that would specify how many sequences there are in a given list (in this case they're two sequences in this list).
2) is there any formula that can allow me to see each sequence highlighted in a different color (or any way to differentiate the sequences so i can copy paste them easily?). Pretty sure i'd have to use conditional formating on the entire list to do so but am clueless as to the implementation.
3) a formula for a single cell that can state the largest sequence in the list. in the list above the largest seuqnce is 5 numbers so that would be the value i'm looking for.
View 9 Replies
View Related
Oct 22, 2013
Worksheet cells A1 – A25 have sequential numbers 1 – 24
the following elegant code generates every permutation of six numbers from the list into Cols C – H
VB:
Option Explicit
Sub Combinations()
Dim rRng As Range, p
[Code].....
View 7 Replies
View Related
Nov 5, 2008
I have a spreadsheet tool that I use to calculate values on a set of variables, based on values on an initial set of other variables, for a large number of cases.
The calculations require a number of sequential steps to be repeated to get the calculated values for each case, and I am hoping there is a straightforward way to use a VB macro to automate this process.
Essentially, these steps are required to calculate values for a single case:
1. A data input sheet holds the values on the initial/input variables for each case. The first step involves copying the string of values for the case on the input variables into a sheet where the calculations are done.
2. As soon as the input string of values are pasted into the calculation sheet, the calculation formulas generate values for the case on the new, output variables.
3. The output variable string is then copied from the calculation sheet into a “results output” sheet. This copy/paste procedure needs to offset from the first row on the output sheet, so that the row number where the values on the output variables are stored correspond to the case ID. For example, case ID 10 is stored 10 rows down from the first row (i.e., on row 11). Case ID 100 is stored 100 rows down from the first row (i.e., on row 101).
As there are a very large number of cases, I need to have a “control panel” in place, where I can indicate the range of case IDs that will be processed. This takes the form of two cells – one indicates “From ID” and the other “To ID” (for example, “From ID” 1 “To ID” 100). The macro then uses this information to loop through the calculation steps outlined above for these case IDs.
View 4 Replies
View Related
May 28, 2009
I have the following two formula's:
=IFERROR(IF(X12="",X13&" "&MATCH(FALSE,INDEX(X13=X13:X1000,0),0)-1,X12&" "&MATCH(FALSE,INDEX(X12=X12:X1000,0),0)-1),"")
=MAX(FREQUENCY(IF(INDEX(X:X,12):INDEX(X:X,1000)="WON",ROW(INDEX(X:X,12):INDEX(X:X,1000))),IF(INDEX(X:X,12):INDEX(X:X,1000)="LOST",ROW(INDEX(X:X,12):INDEX(X:X,100)))))
The first shows the current sequence of events (WON or LOST) and the second the best sequence achieved.
They work fine but I would like to modify them to only use the data, if "P" is in column D of that row.
View 9 Replies
View Related
Dec 21, 2006
How can i easy return the smallest number higer than 0 from a set of numbers?
View 11 Replies
View Related
Jan 25, 2013
I need a formula that will find the second smallest number in a row. The row can contain as many as 200 numbers with many of them being zeros. That makes using the "small" function impossible.
View 9 Replies
View Related
Feb 26, 2014
I have 2 columns of numerical values (A and B).. I want to make a formula that takes the Sum of A/the Sum of B, neglecting the smallest value of A and it's corresponding B value
For example...
19
20
20
20
15
20
Clearly, 15 is the smallest value, and I want to know how I can take the sum of A/sum of B neglecting the 15
Basically, I want the formula to do (19+20)/(20+20)
The actual scenario has a lot more than 3 values, and I don't want to go through all of them (they change frequently)
I know how to make the simple formula..=SUM(A:A)/SUM(B:B), but I do not know how to make excel recognize, and not include the smallest value..
View 3 Replies
View Related
Jul 24, 2009
The whole "story" is explained, in details, inside the attached WB.
View 3 Replies
View Related
Jun 6, 2014
I currently am working with a worksheet that has over 250,000 data points. It is a spreadsheet for a company in which different work order are organized. A given work order can have several parts (ranging anywhere from one component to 40ish) and thus the height of the cells in which each specific work order is placed differs from work order to work order. For each component, the spreadsheet tells you how many can currently be made based on the materials available. What I would like to do, for each specific work order, is go through the data and simply tell whether or not the work order can be completed (the quantity of each specific component needed is also given in the spreadsheet) and then report out exactly how many components can be made.
Ultimately, this means that a "limiting factor" analysis must be done. For instance, if the work order is asking to create plastic bottles that consist of the bottle, the cap, and the label and it asks for 3 bottles but only 2 caps are able to be made, the limiting factor would be the caps and thus only two bottles could be made and the work order could not be fully completed.
The spreadsheet is set up based on another worker here, I am just trying to come up with a way to analyze it. Cells A1:Axxxxx are the work order numbers and the size of these cells differ because they are merged to fit the number of components they have. The componenets available are then ranged C1:Cxxxxx etc and the quantity needed are also listed in a similar fashion. What sort of structure could I use.
View 7 Replies
View Related
Sep 17, 2009
I'm creating a spreadsheet and have had difficultly creating a function that returns the second smallest unique value.
For example if my data set is:
2, 2, 3, 3, 4, 5, 6
I'd want the function to return "3". I've tried playing around with the SMALL(array, k) function and trying to use a COUNTIF function for "k".
View 6 Replies
View Related
Mar 17, 2009
D3 = SMALL(H6:H45, COUNTIF(H6:H45,0) +1)
to determine smallest value in range excluding 0 is it possible to link that smallest value to another value like a name?
Eg. H6 = 5 K6 = Ben
H7 = 4 K7 = John
H8 = 9 K8 = Ted
Thefore D3 = John
View 12 Replies
View Related