Calculating Time Between 22:00hrs And 08:00hrs Without Entering Date?
Apr 21, 2013How do i calculate the time between 22:00hrs and 08:00hrs without entering a date? Is this possible or do i need to enter a date?
View 9 RepliesHow do i calculate the time between 22:00hrs and 08:00hrs without entering a date? Is this possible or do i need to enter a date?
View 9 RepliesI am trying to create/modify an XY scatterplot using VBA.
I declare local variables and point them to the chart and a new data series for the chart, such as:
Dim chartone As Chart
Dim chartseries As Series
Set chartone = ThisWorkbook.Charts("Chart1")
chartone.ChartType = xlXYScatterLines
Set chartseries = chartone.SeriesCollection.NewSeries()
I set the series data, using an array, such as:
chartseries.Values = Array(1, 3, 5, 7, 9, 11)
I can set the Xvalues to a set of dates by setting .Xvalues to a woksheet range that includes date-formatted data. (like this):
chartseries.XValues = Worksheets("sheet3").Range("m9:m14")
(where m9:m14) contains dates...
I am writing a module which have a different test based on for each of the previous 2 column cells. It calculate the days passed or in simple way calculate the date difference for the 2 columns and puts them in third. But i need to use a inputbox for entering the first date for monday of the month each time i use the worksheet.
When i try using the module for each cell of the column it display the input box for each cell. is there any way so that i just enter the value in input box and it can be used in rest of the module.Without using it again and again.
Within 4 columns, I have a series of:
Start Dates / Start Times / End Dates / End Times
I need to create a formula which will give me the sum total of the difference between the data sets.
For example, the time difference between 8am on the 20th March and 1pm on the 21st March is 29 hours OR 1 day and 5 hours.
I need a formula which will calculate this for me.
I am trining to calculate SLA times based on P2, P3 & P4 calls, the only issue is with P2's as the SLA includes the weekend, how to include the weekends into my formula?
AE2 = Priority
U2 = START DATE & TIME
V2 = END DATE & TIME
[Code]....
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedI want to find the hours worked in day shift and night shift. Day shift is from 06:30 to 18:30 and night shift is from 18:30 to 06:30. Listed below is an example of my date/times.
Note that the night shift carries over to the next day.
Start/Finish
21/12/09 07:00 to21/12/09 11:09
21/12/09 07:46 to21/12/09 14:41
21/12/09 12:13 to21/12/09 22:08
21/12/09 16:40 to21/12/09 18:05
21/12/09 19:40 to22/12/09 02:34
21/12/09 23:20 to22/12/09 04:39
22/12/09 02:06 to22/12/09 06:15
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
If I use format cells and choose time... do I have to enter the time in decimals to get it to show up like 1:30 PM? Or is there a way for me to type something quicker like 130 p?
View 9 Replies View RelatedIf I have 3 text boxes textbox1, textbox2 and textbox3
I want ot be able to enter a time in textbox1 and then a time in textbox2 and textbox3 would give the difference. i.e. 09:00 17:00 then textbox 3 would calculate 08:00
Then all 3 times would automaically be entered in Sheet1 A1,B1 and C1
I have two excel file name as A.xlsx and B.xlsx. Avoiding double work if I entering the production data in A.xlsx , need to automatically display the same data in B.xlsx. Let me know how the entered data in A.xlsx automatically display in another excel file B.xlsx.
View 1 Replies View RelatedI have created a time sheet and I would like to know if there is a way to auto-lock cells after time is entered so that it cannot be changed. As of right now I have employees enter the time by using Shift+Ctrl+;, so the exact time is recorded, however employees can write in whatever time they want. so I guess what I want to do is 2 things:
1- can the cell be formatted to only accept Shift+Ctrl+;, so that the exact time is entered in the cell and prevent employees from entering times they were not at work?
and
2- can the cell auto-lock after Shift+Ctrl+; is entered so that they can't modify the time sheet the next day if they arrived earlier than the day before?
I am having a little trouble with a spreadsheet I am creating, the formulas and cell formatting I should be using to enable this to work.
Here goes:
in cell E3 I have a time started (e.g 12:45 pm), In F3 i have time finished (e.g 2:30 pm)
So, what i'm wanting is the time taken in G3 and also, i have the amount of units that is entered manually in H3. I would like I3 to show the time taken per unit.
I'm battling to come up with the formula to calculate time and a half and double time. My boss wants me to show the overtime worked AFTER 40 hours has been worked. I have attached a copy of my spreadsheet.
View 4 Replies View RelatedI know the title is a bit vague, but I cant think how else to word it!
I have a sheet (attached) which works out hours worked, and if the amount is under a specified target, it counts how much time is owed. The problem occurs when someone works more hours than the specified target.
I guess I need an IF formula of some kind, to say if the figure is over the target, to put zero in the hours owed column.
I'm using a formula to copy a time from one cell to another
across sheets. The format of the time is h:mm AM/PM.
However, when the formula references an empty cell, it puts in a
default value of 12:00 AM and I need it to remain blank, (just as
the referenced cell)
It's such a simple copy formula. ie:
=sheet1!A1
e-mail... howard<dot}coakleyatcoakley<dot].codotuk
Skype ID: howie10 (get skype from www.skype.com)
I have few sheets in a workbook and last sheet named report, I update each sheet date wise except report, problem is that the report sheet contains formulas of last rows sum, if I update today date report then I should change all formulas in reports. Kindly see attached file.
View 5 Replies View RelatedI am currently working on a button which does the following:
User wants to create a new sheet
Clicks button
Input box prompts user to enter sheet name
User enters the sheet name
The sheet is created and copies over formats and values from another sheet
I then want the user to also enter a date.
The date must then be places (always in "C2") then each second column after that the date entered + one day.
E.g. C2 = 01/08/2008 then C4 will have 02/08/2008
I want this entered for the whole month.
The code is below:
Sub copyformula()
Dim vsheet As String
Dim vdate As Date
vsheet = InputBox("Enter a sheet name:")
I have a spreadsheet that records water consumption in L/s at 5 minute intervals. I've attached an example of the data collected during January 2012.
Is there any formula that will calculate the total amount of water consumed between a user-entered date range? For example:
From: 01/01/12 00:00 (User enters 'from date and time' in an allocated cell)
To: 20/01/12 23:55 (User enters 'to date and time' in an allocated cell)
Consumption: ______ (Formula generated result in Litres)
i want to let a user enter a date and then chk if the user entered the right format.
It is not working....In order to see if works i press entered without entering any value and a TYPE MISMATCH error msg appears.
here is my
NumberEntry = InputBox("Enter Start Date", "Start Date", "dd/mm/yyyy")
Do While Not IsDate(NumberEntry)
MsgBox "The FROM date is not a valid date."
NumberEntry = InputBox("Enter Start Date", "Start Date", "dd/mm/yyyy")
'NumberEntry = InputBox("Please enter the date (dd/mm/yyyy) FROM to work with.")
Loop
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
how to do the formula for highlighting whole row after entering a date in one of the columns.this spread sheet had over 300 rows so I can't do the conditional formatting, I need a formula for whole spreadsheet.
View 11 Replies View RelatedIn the workbook the sheet names are month names e.g. july,august,September etc and 1st of each month is to be entered in a cell in each the sheets. By some trial and error I wrote this macro
VB:
Sub test()
Dim j As Integer, monthnr As Long, monthname As String
For j = 1 To Worksheets.Count
[Code]....
This worked in July sheet it is written as 7/1/2013 and in august sheet it is 8/1/2013 etc Then I shortened the macro like thlis
VB:
Sub test()
Dim dte As Date
dte = "july" & "/1/2013"
Range("A1") = dte
End Sub
It worked. Even if I use shortened 3 letter form of month like "Jul" or "aug" then also it works
But if type on the spreadsheet itself
="july"/1/2013
It Gives value error.
Perhaps it works only in vba and not spreadsheet.
I accept nobody is going to use "july" & "/1/2013" instead of 7/1/2013 But this will be useful if sheet names are month names so that when we write the date we can use sheet names Mine excel 2007 and windows 7.
I am entering data for ships arrived every month. There are about 200 records to be entered and for every record there are 4 date fields.
My question is : Is it possible to set default month (for ex = July) and year ( for ex = 2013 ) in these 4 cells so that
If I just type 16 it should be 16/07/2013. Because all my dates will be within that month July 2013.
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedFirstly, i'd like cell G5 to show the amount of time worked i.e diff between E6 & F6. Secondly I'd like help with the formula for cells AF6 & AG6 which would require AB6-AC6 divided by the frames, every time I try it I get a messed up answer.
View 14 Replies View Related=INDEX({"$5.00","$3.00","You Were Late"},MATCH(L17,{7:00am,7:05am,7:06am},1))
i have this formula in excel...this formula sanrv1f posted to help with another question (values changed) but i thought i would work with what i wanted but i get a (Value) error
so what im trying to do is base on the system time is if the person typed in
if they were early 6:45am to 7am they get Extra $5 on top of the $5 they get for being on time.
6:55am gets $5
7:00am they get $5.00 for being on time
if they type 7:01am to 7:05am they get $3.00
if they type 7:06 to 7:10am would return You Were Late
after 7:10am would return No Pay
so Ex
D4 *answers in E4 *
7am would get $5
7:03am am would get $3
7:07am would get You Were Late
7:11am Would get No Pay
if they were on time 5 times (ie 5days in a row) they would get a bonus of $20 i tried factoring this in could not do it :/
basically I need an excel sheet to calculate the period of time between cells.
For instance, in A1 I write:
18-Feb-10
In A2 I write:
13:00
Unfortunately I cannot write 18-Feb-09 13:00 in just one cell because it doesn't work.
Now, in B1 I write 19-Feb-10
and in B2 I write 15:14
Now we know that 26 hours and 14 minutes have elapsed between these two times. So if I want this to automatically be calculated in B3, what do I do?
Also, how do I apply the formula to all cells in column 3 so all I have to type in is the date (in column 1) and the time (in column 2)?
I'm having a DICKENS of a time on this one. To explain, I have 3 columns where time is entered: a 'Time of Call', 'Time of Arrival', and 'Response Time'. The 'Response Time' cell autcalculates by simply subtracting the 'Time of Arrival' form the 'Time of Call' and using the difference to show the response time. To make time entry into the 'Time of Call' and 'Time of Arrival' simplier for my co-workers, I formatted those cells as 00:00 so that anytime you enter a number it will convert it to a time format (i.e., if you enter in the numbers 745, it will show as 7:45 in the cell). Because of this, when the response time is configured, it does it in hundreds instead of time format. So, if you enter in 7:45 as your time of call and 8:15 as your time of arrival, it shows 70 minutes as a response time because it sees the 7:45 as a whole number...745. Therefore, 815-745 DOES equal 70, but...that's not what I'm looking for. I want it too configure this as time...not as whole numbers.
View 2 Replies View RelatedI know how to calculate the duration elapsed between start and finish time. But how can I display the total time if for eg it's ends up being 300hrs?
I need the hours spent in the building per day and then the grand total per month.