I have a similar issue, but it's with a date field. Every day, I go in and check the current day to show the current days data(on a Pivot table). Is there a way to modify this code so the AutoFilters update and "check" up to the current day?
View 2 RepliesI have tried to record a macro and change it to what I need but so far I have not been able to make it work.
I would like to have a macro that will auto filter on colomn 1 in the following way.........BETWEEN >= Today -10days and Today.
How do I get cell B1 to show only the date that corresponds with the current date?
ex.
A1
15-Nov
26-Nov
29-Nov
2-Dec
4-Dec
4-Dec
5-Dec
6-Dec
If I enter 12/2, in one of the rows in column A it will display today dates in cell B1 since today is 12/2, but when tomorrows comes, since there is not a 12/3 date in column A, B1 cell will be empty, but when 12/4 comes, cell B1 will show 12/4 since that is a 12/4 date
I needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
how i can fix the formula below to show the number of remaining days between the given date and the current date.
View 3 Replies View Relatedhow to make a date automatically show up in the current year.
For example, if A1 = 6/2/2005, and I want B1 to equal that same month and day, but 2011... How can I do that?
I know =6/2/2005 + 365*6 would work, but the date in A1 will vary... so it has to be a way of showing ANY date with ANY year with the same month/day but current year.
I have a little problem (but for me is like a break); I want, when I change some in a cell, in the other cell, show me current date. I try with "today()", but , next day when I open that workbook, in that cell, show me the date coresponding with the next day (normaly).
How ,I can rezolve this? I want to blocked that cell, only view, but no acces for change enithing.
I am trying to write a formula that will have the cell display todays date if it is after 2:00PM, and if it is before 2:00PM I need the cell to display Today()-1. I have tried several iterations and I'm stumped.
View 5 Replies View RelatedI would like to be able to track progress of various tasks/occurences by allowing users of a spreadsheet to just click in the appropriate column and in doing so, it would fill in the current time and date. I.E. Column headings would read, "Item Sent to Review", "Item Received From Review", "Item Sent to Specialist", etc. and I want users to be able to double click in a given column to populate with current date/time information,
View 7 Replies View RelatedI have autofilter enabled on the header row across the top of my worksheet.
Is there a quick line of VBA I can use to toggle EACH one to (ALL). This would act as a "Reset" in my spreadsheet and display everything.
I'm trying to use " autofilter". I put the code as
Worksheet_Change(ByVal Target As Excel. Range)
so it'll update by itself. My criteria are on row 5 and all my data is below row 7. Row 7 contains the headers.
This all works fine for text-fields. My question is if someone can get it working with numbered fields?
I have to append the cell value with a user input string in to the same cell.
i.e, if the user types "Issue" in the cells ranging C1:C200, I would like to make a mandatory issue description to be entered by the user. So a user form with text box and command button was introduced which should append the cell value with the user input in the text box.
The issue that I have is with the cell selection within the code for the form.
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
For example if the user tabs out from cell C3, the output from the userform will be written to D3 ? or if the user hits Enter key to come out, the output will be written to C4 and so on.
How can I make ure the output is going to the same cell?
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Application.Intersect(Target, Range("$C$1:$C$200")) = "Issue" Then
Dim MyForm As New UserForm1
MyForm.Show
Else
Exit Sub
End If
End Sub
'Code for the userform is below:
Private Sub CommandButton1_Click()
If TextBox1.Text = "" Then
' the user input is mandatory
MsgBox "Issue Details is mandatory", vbCritical, "Mandatory Field"
TextBox1.SetFocus
Else
' append the cell value with user input in the text box
'****issue is here in the next line
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
Hide
End If
End Sub
When copying data from a closed workbook, I frequently get the prompt:
"Links to 'Source.xls' were not updated because 'Source.xls' was not recalculated before it was last saved.
To update links with current values in 'Source.xls', click OK..."
Is there a way I can bypass this prompt and automatically update with the saved (uncalculated) values and therefore not require a user intervention?
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies View RelatedI want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies View RelatedYou posted this code and it works well
could u advise how to display just the criteria ie no heading, no :, no =, and when it displays the criteria could it fill the cell with a colour. When filter is set to "all" give a blank cell
This would over come lots complaints from operators not realizing that filters are on because they can not find the silly blue button.
Are microsoft aware of is and are they changing it in the new release.
I attached a small file in which I filtered on Cities. And now I am looking for a VBA to copy the filter to an empty cell. Is this possible?
I have some code for applying various filters, up to a maximum of five. However, not all five fields need necessarily have any filter but I can't find a way in the vaConditions line to show 'no filter' or 'All'.
vaFields = VBA. Array(1, 3, 4, 9, 10)
vaConditions = VBA.Array("", "", "", ">20", "")
Set rngData = Worksheets("CECO 2005").UsedRange
For i = 0 To 4
rngData.AutoFilter Field:=vaFields(i), Criteria1:=vaConditions(i)
Next i
Why auto filter does not show all the records in drop down menu ?
View 2 Replies View Relatedi have the code below attached to a button and was wanting to know how (if possible) i could do the same thing but to all sheets so that i could have one button that removed all the autofilters in the work book ....
View 9 Replies View RelatedI have autofilter enabled on the header row across the top of my worksheet. Is there a quick line of VBA I can use to toggle EACH one to (ALL). This would act as a "Reset" in my spreadsheet and display all content. I had a solution that worked, until I made the workbook shared / password protected.
View 3 Replies View RelatedI'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
Hi guys i am in assistance of your brilliant brains, i have a working drop down menu which when selected i can select my data range such as below: ...
View 6 Replies View RelatedI have a macro that starts when the workbook is open that hides many of the headers and toolbars. It is great and works fine unless you are working on another workbook and need to see those headers and tool bars. Is there a way to display and hide those items per workbook and not for the entire application. here is my failed attempt:
Sub show_excel_headers()
Dim wb As Workbook
Set wb = ThisWorkbook
wb.Application. ScreenUpdating = False
'Display Headings in all worksheets
Dim wsSheet As Worksheet
Dim sSheetStart
Set sSheetStart = ActiveSheet
wb.Application.EnableEvents = False
For Each wsSheet In Worksheets
wsSheet.Activate
ActiveWindow.DisplayHeadings = True
I would like to have a student's current overall grade be automatically calculated and displayed as I enter the test scores and extra credit points over the semester, first in percent and then in letter grade.
I have it set up so that the percent is calculated based on the total number of points likely to be obtainable at the end of the semester. But if they have only taken two tests and one extra credit assignment, it takes the total of those and divides it by the semester's total possible, instead of just the two tests and extra credit total possible. (ps: I do not know how many extra credit columns or number of possible points I will have this early in the semester)
Also, how then do I set up a formula to translate that percentage into a letter grade based on A=90-100, B=80-89, etc.?
I am looking to adapt a piece of code (originally created by Ger Plante) so that it autofilters multiple columns of a table. I have three data validated lists that need to search 3 different columns in the table and filter accordingly, but also show all if no hits are made (hence why Ger Plante's code) was perfect in most respects. I would ideally like to keep the code as a Worksheet_Change event, but can deal with it being run as a normal Macro via a button if this is necessary.
[URL]....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1")) Is Nothing Then
Range("A5:C5").AutoFilter Field:=1, Criteria1:=IIf(Trim(Range("B1").Text) = "", "<>", "=") & Range("B1").Text
End If
End Sub
How can I get the dropdown list to not include blank cells in the list reguardless if the sort filter is used or not.
Sheet 1 (STATS) is the dropdownlist Cell B12
Sheet 2 (Orders) is the data, I cant convert to tables because the cells are active and storted Column B2: is the data named.
so I have to use a formula to do this.
Using Excel 2010
See attached sample
Sample.xlsm
I have a spreadsheet that has a userform attached to it with text fields that enter additional data regarding each record. The userform takes these additional 5 fields and inserts them back into the spreadsheet, the final information to be exported back into Access. ( There are of course other ways to do this, but this is how my supervisor wants it done!)
My problem is that now that I can scroll through the spreadsheet without closing the userform, the userform doesnt show the current row's information as I scroll or change rows on the spreadsheet. It will only show the information that was in the row that it was on before i switched back to spreadsheet.
You could use:
If ActiveWorkbook.Sheets.Count < 17 Then
Application.CommandBars("Workbook tabs").ShowPopup
Else
Application.CommandBars("Workbook tabs").Controls("more Sheets...").Execute
End If
The code doesn't do anything on my excel workbook which currently has like 20 workbooks, and it grows daily by like 4 or 5 worksheets.
Is it possible to display a dialog box or msgbox that doesnt have an OK button ?
i.e I want a message that comes up on the screen that says "Links Updating...Please Wait" which then automatically changes to "Links Sucessfully Updated" on completion...I dont want the macro to be interrupted by the msgbox/dialog....