I have a range of cells that change colors with conditional formats based on the cell value from high to low. I would like to link the cell color to an object such as a circle or rectangle. When the cell value changes along with the conditional format, the color of the object will also change.
View 3 Repliespivot table?
Is there a Color Function type vba code that can give me the color integer? I have one that can do that for cells that I've manually colored but I can't find a code that works on conditionally formatted cells.
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have a question and wanted to know if it was possibe and if so how. I wanted to link cells from one workbook to another (Which I know how to do) the problem im having is the linking works but why doesnt the cell color chang like it is in the workbook im linking from? Example: If A1 has text (Me) with the cell being green then the linked workbook would only have the text (Me) and not the green cell.
View 4 Replies View RelatedI have an Oval (Oval 1) in Sheet1, and I'd like to change it's color from cell A1 in Sheet2 using VBA.
The colors are: Red- (255, 0, 0)
Yellow- (255, 255, 109)
Green- (41, 247, 46)
and Grey- (127, 127, 127)
I'd like these colors to Fill the Oval object. I'm not too worried about the line color at this point.
I'm trying to use the SUMCOLOR function found on your website to sum cells which have conditional formatting (background colors with bold writing) applied to them, but it doesn't work.
I'm attaching the code found on the website as a reference.
I read some content on Cpearson but it's way beyond my understanding.
Function SumColor(rColor As Range, rSumRange As Range)
''''''''''''''''''''''''''''''''''''''
'Written by Ozgrid Business Applications
'www.ozgrid.com
'Sums cells based on a specified fill color.
'''''''''''''''''''''''''''''''''''''''
Dim rCell As Range
Dim iCol As Integer
Dim vResult
iCol = rColor.Interior.ColorIndex
I would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in brackets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
I would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in breckets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
I've a worksheet that is 3750 rows of cells from A to DT and contains only numbers with the exception of a header row. The rows are in groups, primarily 4 rows, although there are exceptions - these rows are separated by blank rows. Small example as follows.
0:001:002:003:004:005:006:007:008:009:000000-296567-6-1-400000286567-300-230000715557-16-11-40-18141755226-348405-362203081417192125-893581061800-2443-11124-289326-81318-1105027854331331211318-10216-161235526785691450451115951-17-1882505656683093102671056-191-33-2710000554740971-61-78-34224107-169-128-17090179-85220-55-63-1-162-140-242-235328266319106113-214-64-148205-4108120-142076-167-60-68-6418081102-800000000000-3099695807185-80356138-123194186210677727125-23233092-2942944748055564476-422051-224-34461486649597117-84209-22-251-94
I have been trying to conditionally format each group of rows and each column and color the cell in each column of four (or less) numbers in each group that represents the maximum number.
It was easy enough to come up with the conditional formatting BUT it will take forever to do this manually. I've been told to use a macro but I know nothing of programming. Has anyone seen or heard of a macro that might already be written to perform this onerous task.
This is my first use of the forum as I only joined yesterday after a recommendation from another colleague.
I am attempting to write a macro to clear the contents of cells in a range that have conditional formatting. Below is the formula I have used...
Sub clr()
Dim r As Range
For Each r In Range("09:050")
If InStr(r.Interior.ColorIndex, "40") Then r.ClearContents
Next r
End Sub
While the formula runs without error, it does not clear the contents, although I read on another thread on this forum that you cannot clear contents of cells that are conditionally formatted.
Alternatively, if there is a more efficient way to clear cell contents (without using a formula in the cell itself),
spread sheet that I need to do for work. Unfortunately I do not have excel on my home computer to be able to attach a spread sheet
The spreadsheet has one column (A) with a list of questions. The column next to this (B) has either a red or yellow cell in each row (a red cell would be a high risk to the business if the answer to the question in that row was no, and a yellow cell indicates a moderate risk to the business in the answer to the question in the row was no).
The third column (C) is conditionally formatted so if a 'y' was placed in any of the cells they would turn green. If 'n' is placed in any of the cells the cell would change to either red or yellow (this would depend on what the colour was in column B).
I need to know a formula to count cells by colour. So the number of red, yellow and green cells in column C would be counted automatically into a totals box for each colour at the bottom of the spreadsheet. I have tried some online suggestions but couldn't get these to work for cells that had been conditionally formatted. I'm not the most experienced person with spreadsheets (this time last week I couldn't add two cells together)
The final thing I need from the spreadsheet (and I'm not even sure if this is possible) is for a total box to be colour co-ordinated based on the number of red, yellow and green cells in column C. I would need the total box to be green if all column c is green, yellow if three or less cells in column C are yellow and red if any of the cells in column C are red or there are more than 3 yellow cells in column C.
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View RelatedThis is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
View 1 Replies View RelatedUsing 2007, I need to conditionally format a cell colour based on 5 other cell colours that have been conditionally formatted. The 5 other cells will be coloured either red or greem. What I want to do is have an overall status cell that would be show green if all of the other 5 cells were green, amber if 4 of the other cells were green and one was red and red if 3 or more cells are red.
View 4 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
if it actually possible to colour data points depending on the colour of the cell of the data it refers to? if not is it possible to colour it any other way
i have uneven amounts of data for weach month but still want the months to be displayed, this is the best way i can think of of doing this
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
I've reached a problem with colors in Excel: need to convert cell color (get from .Interior.ColorIndex property) into RGB value (to set ForeColor of the button). How can I make it?
View 8 Replies View RelatedI want to set the color of the line.
VB:
With Sheets("Graph").ChartObjects("Chart 3")
.Activate
.Chart.SeriesCollection(1).XValues = Sheets("Data").Range("D2:D" & Sheets("Data").Cells(Rows.Count, "D").End(xlUp).Row)
.Chart.SeriesCollection(1).Values = Sheets("Data").Range("E2:E" & Sheets("Data").Cells(Rows.Count, "E").End(xlUp).Row)
.Chart.SeriesCollection(1).(What Do I put here To Set the color of the line)
End With
I have columns that have different colors, depending on there conditional format i.e. Green or Red. I want to count the number of either Red or Green in a total at the bottom. I have search and found a few answers
Function CountColor(rColor As Range, rSumRange As Range)
Dim rCell As Range
Dim iCol As Integer
Dim vResult
iCol = rColor.Interior.ColorIndex
For Each rCell In rSumRange
If rCell.Interior.ColorIndex = iCol Then
vResult = vResult + 1
End If
Next rCell
CountColor = vResult
End Function
BUT these don't seem to work on conditionally formatted columns
I have flowing cells in excel:
1
2
3
4
5
6
7
8
9
10
11
12
First row are months (number representing specific month). I would like use conditional formating and color cell below month if that cell is empty and if it is more that 15th of that month.
To be more specific. If we look at last column (since we are already in december). Since today is 04 december the cell below "12" should remain uncolored. But when the date will be 16th of december I want that cell to color orange. Since it is blank. But if there would be a number in it, cell should remain blank even after 16th of december.
I want to be able to change a color of one cell according to color of another cell. suppose, cell A1 has text "apples" having red color. Now, if I enter text same as A1("apples") in another cell, say B1, then color of text entered in cell B1 should be red. I am using Excel 2007
View 3 Replies View RelatedI am looking to produce a Macro to select conditionally formatted cell's from a worksheet, i got as far as selecting those cell's but i need it to only select cells that have been filled.
View 6 Replies View Related