I am working on a Listview. Every time I open the file, the ListView doesn't appear to be of the same size I intend it to be. Although I kept the size of the ListView big enough to show all my data, the ListView still goes back to much smaller size.
Work with ListView in excel worksheet.
My requirements are:
1) The items in the listview needs to have checkboxes (which can be set from property I guess)
2) The listview columns have 'greyed' column headings.
3) The items in listview gets populated from the data stored in Access database.
4) The listview has multiple columns
I want to add colour background to every other line in a Listbox (like the old computer paper green/white lines) but we know this can not be done, so everyone who knows says use Listview instead. Try as I might I can not seem to add items to the Listview control though.
This has got be one of the dumbest questions, but how the heck do you add items, its so easy with Listbox.
As an aside I wonder why no bright spark has not written a control that replaces Listbox with extra features yet.
Why when I print our my listview it comes out blank?
View 2 Replies View RelatedI created a form in which TextBox Value will change based on selection in ListBox.
Problem : I have YardNo in Colm 1 of List Box which is having duplicate value.Now when I select 1st value of duplicate Item it shows same value in TextBox. But When I select 2nd Instance of Duplicate Value it shows the 1st value in textbox. Means its not changing the values. Attached file will give you a clear idea.
I would like to know if I can lock the checkboxes on a listview. I have a form which loads information onto some textboxes once a listview item is selected, then the user will change the selected values on the textboxes and then, when the value is verified, the checkbox of the selected item should be checked.
View 3 Replies View RelatedI am struggling a bit with the populating and double click even of a Listview control. I have very little experience with the Listview control.
I would like to populate the control with the table in sheet1 - I have very little idea of how this is done. Then once the control is envoked, I would like it so that when a user double clicks on a cell in the control, the value of that cell will appear in range("a1") of sheet1 - I am not even certain if the second part is possible.
How to upload data in an excel listview using vba.
Will appreciate if anyone can give an example.
My case is:
I have five columns in the listview. Now i need to run a loop to upload data in each column.
I have a userform that has a listview in it. In the listview i have bunch of icons with names. I have it where if you double click on the icon, you will see a msg. box which you need to press ok and the box will go away. After you press ok the icon is still selected. I would like to be able to deselect the icon when you click on the listview box (in the white space away from the icon). I tried everything and no matter what i do, I cant deselect the icon. It is either highlighted or has a outline around it (little dots around the icon). This means that i can double click anywhere in the listview box and the and the msg. box will pop up.
All I want is when i double click the item, the msg. box should come up and when I click away from the icon (click in the white space) the icon should be completely deselected.
I have added microsoft listiview control tool in the toolbox with the help of Additional control. By using listview control, i am going to view the details of employees. If i want to use this tool, i have to add listitem property. If someone know how to add listitem property in the library,
View 3 Replies View RelatedI have a userform with listview control with 8 textboxes. i need to add data from textbox to listview before saving the transaction.
presently i have this code.
VB:
In my userform_initialize i have the header And columns For my listview
With ListView1
.View = lvwReport
With .ColumnHeaders
[Code]....
Currently attempting to find out how to print a ListView, to no avail. Code for the ListView as below.
Code:
Sub DisplayLiabilities()
Dim ws As Worksheet
Dim liLiabId As ListItem
Set ws = Worksheets("Liabilities")
sName = frmModLiability.TextPropID.Value
If sName = "" Then GoTo End_Sub
[Code] ........
in a Useform I have a listview with 4 columns ( No., Date, description, amount)
For every different date is another color of police of that row
and the 4th colum is format : ####,00
I am usind following vba code, but it does not function well, ( attached Excel file )
how can I format bold the first three charaters of the string being added to a ListView control
Set Found = Nothing
Set Found = Range("MyTable"). Find(MyString, LookIn:=xlValues, Lookat:=xlPart)
If Not Found Is Nothing Then
ListView1.ListItems.Add , , Found
End If
I've created a ListView4 object on MyForm and called it 'MyListView'. I'm able to successfully display it and populate it with a list of items (2 columns). So far, so good.
I'm trying to intercept a double-click on an entry in the listview so I can process the selected value and close the ListView. Unfortunately, the MyListView_DblClick event apparently does not get triggered (I've also tried other events, but can't get them to work also).
I have a user form with a ListView box , I am trying to get 2 things done;
1- When I type a text or a number by using "Search Box" I like to search the things in the ListView box items and highlight whole row
2- When whole row highlighted I like it to show the "Ref" item (Colum 5) in the text box which is called "Invoice No". Also when clicking the row I like the "Ref" item to show in the "Invoice No" (Column 5) text box.
See attached : Aged sample.xlsm
My question, and it's my first one here, is regarding the use of ListViews in Excel forms. I need to populate it with a range of several columns with data from a spreadsheet.
View 4 Replies View Relatedwhat size monitor do you use?
I'm thinking about upgrading my 17" to a 23" monitor so I can see more cells without zooming
Anyone currently use a 23" for Excel?
I'm looking for a way to use VBA to set the window size upon opening the workbook. When the document opens, there should be two windows, each taking up half the screen and each on a particular tab.
Currently, if I save the workbook with the window settings I want, when I open it, both windows are maximized. When I hit the restore button, they go back the settings with which they were saved, which is what I want it to look like as soon as it's opened. Also, a bonus would be for the code to determine the screen size, so it can fill the screen no matter what monitor/computer it's opened on.
I am having some problems with some charts that are being created via VBA.
If I create the chart at 1600 x 1200 screen resolution at 100% zoom then my chart is fine but if I am at a different level of zoom or a different screen resolution the code for position the top and left and width and height of the plot area does not work as expected.
I have the outside of the chart set at 600 wide by 600 tall and no matter what resolution i'm in it seems that it always stays this way. I just seems the plot area and the legend move around.
I have a workbook which has a file size much bigger than I would expect. To test it I inserted one blank worksheet and deleted everything else. I have removed a macro that was embedded in the workbook. I have removed all protection etc. I would now expect the file to be similar to a new workbook (circa 13k) but it is still 782kb even though there is absolutely nothing in it.
View 5 Replies View RelatedMY resolution is 1024X768 , and the form is full size of the screen. i want that in other computers , in 600X800 resolution , the form will be also on over the screen/
View 3 Replies View RelatedI built a workbook that is used by our account team to summarize account status. Each worksheet has several cells that use conditional formatting to call attention to the status reported in that cell. Each manager sends their worksheets to a Senior manager who then consolidates into a single workbook containing approximately 50 worksheets. Once consolidated, the file size has grown to over 12 Mb and this needs to be reduced to a more manageable number, preferable 4 Mb or less. Prior to buliding the new version of this workbook, the file size was less than 2 Mb.
I have removed the Macros and believe the size is due to the conditional formatting in each worksheet.
Once the worksheets are compiled, is there a way to remove the conditional formatting and save the existing format - Similar to a "Paste Values" function? The senior manager does not need to change cell value to the formatting of the worksheet he receives could be saved.
To be specific - one cell turns has no color if the value is 10 or less, is yellow if 11 - 15, and Red if 16+. Once sent to the manager, the variance in this cell is not needed; he only needs to see the color associated with the value when sent. Next week he will receive an updated worksheet and a new value will be entered. The conditional formatting is only needed by the individual preparing the original worksheet.
Somehow my tab names (in 2003) have a very small font size. How do I return the size to normal?
View 5 Replies View RelatedI am new to Excel VBA - Normally, If u move your cursors to the corner of your userform,we will see the single-two pointed arrow pop-out and then we can adjust our own desired size of the user-form.
How to do that in EXCEL VBA?
I have my Excel set up for a default font size of 12 point.
I often download CSV data to insert into spreadsheets. It opens in a new spreadsheet, and it's properly displayed in 12 point size. When i copy and paste it into the ultimate target spreadsheet (which is also set to 12 point size) the pasted data shows up as 10-point and I have to change the font size back to 12-point every time.
Why is this happening and how can I avoid that re-sizing that occurs?
I had a data sheet that used about 20,000 rows, down to AF20000 or so. I deleted about 16,000 rows and now want to reduce the size of the worksheet so that when I hit Control+Shift+End, it takes me only to AF4000, not to AF20000. Can this be done without replicating into a new worksheet?
View 4 Replies View RelatedI am creating a statistics database for my personal use. I have been developing this for many, many months now, and I have learned a lot about Excel and its capabilities in the process. However, I am becoming concerned because my files occasionally crash Excel, and I am wondering whether this is because my files are getting too large. Typically, the crashes occur when the main file is calculating (but not always). It stops responding, and I have to force the files closed through Windows Task Manager.
Without getting into the specifics of how the files work (although we can do that if it is necessary), here are the names of the files and their current sizes:
Baseball Database.xlsx -- ~28 MB
Baseball Reports.xlsx -- ~5 MB
Statistics.xlsx -- ~4 MB
I will have all three of these files open simultaneously when I am working on them, and my laptop has 4G of RAM. I do not have much (if any) extraneous formatting in the files -- I know how to remove that -- but there is quite a bit of conditional formatting in the files that I want to maintain. I am considering partitioning (separating) the tabs in the Database file into separate files.
I am faced with the task of reducing the size of a group of userforms because of screen size limitations.Some of the forms are quite complex and I am wondering if it is possible to select the form and all its contents and reduce it proportionately. It is possible to do this with the form frame but I have not found a way to include the controls.
View 3 Replies View Relatedsome spreadsheets i open dont have 65536 rows , they only a 100 or 200 its seems the worksheets have been cut down. how can i do this based on the last row in the e coloum.
Ie last entry in the e coloumn is 500 the worksheet to only be that big