how can I format bold the first three charaters of the string being added to a ListView control
Set Found = Nothing
Set Found = Range("MyTable"). Find(MyString, LookIn:=xlValues, Lookat:=xlPart)
If Not Found Is Nothing Then
ListView1.ListItems.Add , , Found
End If
I am trying to reference text and another document. The text I want is " stock option expense negatively impacted 1Q:07 by:" and the number i want it to bring back is currently in the model as a percentage. However I would like to bring it back in basis points which would be the percentage times 10,000. So if its in the model as 0.4%, I'd like to bring it back as 40 bps. Here is the formula I am using that is insufficient.
I created a form in which TextBox Value will change based on selection in ListBox. Problem : I have YardNo in Colm 1 of List Box which is having duplicate value.Now when I select 1st value of duplicate Item it shows same value in TextBox. But When I select 2nd Instance of Duplicate Value it shows the 1st value in textbox. Means its not changing the values. Attached file will give you a clear idea.
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
I've used Conditional format before and up to now never had a problem with it. I would like that if a cell ends with a number it turns (eg) yellow. So Hallo1 remains colourless, but in the case of Hallo2 the cell turns yellow. I have tried (in the active cell A20) Right(a20,1)>1 (with the setting hasFormula) and =Right(a20,1)>1, both without the desired result.
I try to write the function that gets some "ref" and returns appropriate item. For example: if I give to function "C3", it returns "AAA" if I give to function "R18", it returns "BBB" (cause it between R15 to R26) if I give to function "R9", it returns "BBB" also.
I have a column of data with letters in each cell, no numerical, only alpha. Now, some of those cells contain the letters "adj sub" as part of the text string in each cell. "Adj sub" is always at the beginning of the text string. As an example, a cell will look like this - "adj sub mhm". I want to delete rows whose cell description does not contain "adj sub" as part of the text in the cell.
I'm trying to create an Excel function that allows me to choose a row from a table based on text found within entered data. For example, say I have a table called "categories" that looks like this:
Categories cat dog mouse
Now in a different section of the workbook, I want to be able to enter an arbitrary number of sentences, one per row, that look something like: "It's raining cats." "The mouse is hiding."....................
I have been working on this worksheet part of which is attached herewith. I would like excel to automatically enter Updated/Inserted in column B against Individuals' names as per the instructions given in column A. For example: As per instruction in A9, B13:B16 should show Updated. I have tried to use the nested if function, but it does not work as I want it to. Also as I am not used to macros or VBA codes, could this problem be solved with formulas?
1) The items in the listview needs to have checkboxes (which can be set from property I guess) 2) The listview columns have 'greyed' column headings. 3) The items in listview gets populated from the data stored in Access database. 4) The listview has multiple columns
I am working on a Listview. Every time I open the file, the ListView doesn't appear to be of the same size I intend it to be. Although I kept the size of the ListView big enough to show all my data, the ListView still goes back to much smaller size.
I want to add colour background to every other line in a Listbox (like the old computer paper green/white lines) but we know this can not be done, so everyone who knows says use Listview instead. Try as I might I can not seem to add items to the Listview control though.
This has got be one of the dumbest questions, but how the heck do you add items, its so easy with Listbox.
As an aside I wonder why no bright spark has not written a control that replaces Listbox with extra features yet.
I would like to know if I can lock the checkboxes on a listview. I have a form which loads information onto some textboxes once a listview item is selected, then the user will change the selected values on the textboxes and then, when the value is verified, the checkbox of the selected item should be checked.
I am struggling a bit with the populating and double click even of a Listview control. I have very little experience with the Listview control.
I would like to populate the control with the table in sheet1 - I have very little idea of how this is done. Then once the control is envoked, I would like it so that when a user double clicks on a cell in the control, the value of that cell will appear in range("a1") of sheet1 - I am not even certain if the second part is possible.
I have a userform that has a listview in it. In the listview i have bunch of icons with names. I have it where if you double click on the icon, you will see a msg. box which you need to press ok and the box will go away. After you press ok the icon is still selected. I would like to be able to deselect the icon when you click on the listview box (in the white space away from the icon). I tried everything and no matter what i do, I cant deselect the icon. It is either highlighted or has a outline around it (little dots around the icon). This means that i can double click anywhere in the listview box and the and the msg. box will pop up.
All I want is when i double click the item, the msg. box should come up and when I click away from the icon (click in the white space) the icon should be completely deselected.
I have added microsoft listiview control tool in the toolbox with the help of Additional control. By using listview control, i am going to view the details of employees. If i want to use this tool, i have to add listitem property. If someone know how to add listitem property in the library,
In column A i will be entering Jobs in the format : 'Customer1 Job4', 'Customer 5 Job 4'. In column B i would liek to identify the jobs automatically, so a formula that goes something like : IF(colum A contains "Job 2", "Job 2",If (Column A contains "Job 3","Job 3","")). There are only about 6 jobs but there could be many customers.
I am trying to create my household budget in Excel, but there is a sub-category.
I need a formula which will calculate the following:
Under the "Daily living" section, I have typed the names of the sub-categories, eg: , Groceries General Household Cleaning Education/Lessons Cash
I want it to find all totals next to the word "groceries" in the main part of the spreadsheet, where I type in my credit card statements according to date.
In other words, I want it to add up all my entries/totals next to the word 'groceries' and show the total up at the top of the document, in the "amount" column so I can see the monthly category totals at a glance.
My file is included with alot of cell in the following format: aaaa. bbbbbbb (ccccccc)
I want to copy the first part (aaaa) into column A and to copy the second part (bbbbbbb) in column B. Both part can vary in length: in this case their length were 4 and 7 but basically they can have any length. How can i do this. See also the attached file.
I have a spreadsheet in excel with lots of rows. In column A I have some descriptions such as:
British Pound Danish Krone Japanese Yen
I have created another spreadsheet 2 columns that would have something like: column A/columnB British/Yes Danish/No Japananese/Yes
This 2nd spreadsheet can grow and have more lines. In column Z of the 1st spreadsheet, I want a formula to look at the second spreadsheet and if any word in the column A of the 1st spreadsheet matches the word in column A of the second spreadsheet, I want it to the value in column B of the second spreadsheet.
I am trying to do a vlookup and am having soem issues. I have data like this in the cell i am using as the reference: "60030 - COLUMBUS, OH". The first column of the range I am searching would have "60030" in it. What i need to know is how do I get the vlookup to just reference the first 5 digits in the reference cell? As you can see by the formula below, I set the logical value to true hoping that it would find the closest value, but it did not work. =VLOOKUP(A7,sdoalign,3,TRUE)
In "sheet2": ___A_________B________C______D 1__USER8____0_________0______=VLOOKUP(A1,'SHEET1'!$A:$C,3,0)*5
In "sheet2" , D1 I'll get #N/A if I do not type the complete name ( USER8 (1246ew) ). Is there a way to ignore this part " (1246ew)" and match only the name of the user?
Also when matching "515 PCS" can it automatically remove the " PCS" part so I can use only the number to make calculations?