I have a form with a main list box and several other list boxes. I drag and drop records from the main list box to the others. When I drop a record onto one of the list boxes, a corresponding worksheet is updated with the same record. This works just fine.
The problem I have is:I close and re-open the form after having added some dataDrag/Drop a record to the list boxThe worksheet won't find the first empty rowExample: If the worksheet already contains 4 rows of data, I have to drag/drop 5 times before the fifth row will be updatedI would like to drop the data the first time and have the first blank row updated
1.) I have tried variations of "xlUp", "xlDown", and SpecialCells(xlCellTypeLastCell) in the "Worksheets("Monday")... line of code; all to no avail.
2.) The cells contain formatting (borders)
Here is the relevant code:
'Copy items from the list box to the worksheet For intI = 1 To ListBox2.ListCount For intJ = 1 To ListBox2.ColumnCount If IsEmpty(Worksheets("Monday").Cells(intI + 1, intJ)) Then Worksheets("Monday").Cells(intI + 1, intJ).Value = ListBox2.List(intI - 1, intJ - 1) End If Next intJ Next intI
On a multiselect listbox, is there any way the user can select a "block" of selections, instead of having to select them one by one? The list box I have has about 100 choices and it would be possible to select blocks of choices at a time. This is similiar to MS Outlook email where you can push the shift key to isolate a block of emails to move to a different folder.
I have a multiselect list box in a userform and need to transfer all the selected items in the list to Sheet2 Column D starting in the first empty cell.
I am using the following
Private Sub CommandButton1_Click()
Dim iListCount As Integer Dim iRow As Integer Dim rStartCell As Range
Set rStartCell = Sheet2.Range("D65536").End(xlUp).Offset(1, 0)
For iListCount = 0 To ListBox1.ListCount - 1 If ListBox1.Selected(iListCount) = True Then ListBox1.Selected(iListCount) = False iRow = iRow + 1 rStartCell.Cells(iRow, 1).Value = _ ListBox1.List(iListCount, 0) End If Next iListCount Set rStartCell = Nothing
My problem is that this is transfering just the first selected item from the listbox to the first empty cell in Sheet2 column D but the rest of the selections are not transfered.
I have a MultiSelect Listbox with two columns of data and I want to enter the listbox row data into different cells of a sheet. For example, the selected listbox first column data to be entered to Sheet1, activecell and rows below (for other multiple selections), and the selected listbox second column data to be entered to Sheet1, activecell(0, 2) and rows below (for multiple selections).
I'm trying to return the selected items from a listbox to a range within a Worksheet when the user press the >> button as shown below. The point is i can't return ALL the selected items but only the first picked by the user.
Here is the code i'm using when button >> is pressed:
Code: Private Sub Inserir_Atributos_na_Analise_Click() Dim i As Long Set ws1 = Worksheets("ListBox")
I have a listbox control on a User Form. The properties are set as follows: MultiSelect: 1-fmMultiSelectMulti; ListStyle: 1-fmListStyleOption. With these properties the user selects multiple items from the listbox by clicking checkboxes that appear to the left of each option. Once items are selected the user clicks a command button on the User Form and the selected items are placed in a single cell on an excel worksheet. The excel worksheet contains an excel list of records. The records on the worksheet can be edited or added.
Letís focus only on the MultiSelect listbox. A single item is selected from the listbox and is applied to cell G2 as CRUSHING. On the next record two options were selected. These items were added to cell G3 as CRUSHING; SHEAR. The next record had three items added to cell G4 as SHEAR; LATERAL BENDING; FLEXION. As you can see from the above example multiple items are added with the item name followed by a semicolon space and then the next item name. The user form contains command Buttons that allow the user to move to the NEXT, PREV, FIRST, LAST, ADD, and EDIT records.
Here is my problem: I can check multiple items and have them added to a single cell of the current record on the worksheet. My problem is how to reverse this process. I need to move back to a previous record and have the User Form appear with the check boxes of the currently selected record.
I have created a user form with a multiselect listbox. The user form displays a checkbox to the left of each ListBox item that can be selected. Once selected the user clicks the SAVE button on the user form and the results are stored in a single cell on an excel workbook. The user form contains several other buttons that allow the user to view the NEXT and PREV records stored on the excel worksheet. If a checkmark is placed next to the option Shear and the Save button clicked, the word Shear would be recorded in the 7th column, current row of the worksheet. If the user checks several boxes like: Flexion and Lateral Bending, the 7th column of that row would store Flexion; Lateral Bending. The macro inserts a semicolon space between multiple selected items.
When the user clicks the PREV or NEXT button on the user form to go an existing record I am having difficulty getting the correct checkboxes to be selected to reflect the contents of the 7th column, current row. The ListBox control is named GeneralInjuryMechanisms. The code that I currently have for this section of the macro is as follows:
Dim strInput As String, strOutput As String Dim varZz As Varient, i As Integer GeneralInjuryMechanisms.Clear 'Clear the existing ListBox options AddRegionalMechanisms 'Recreate ListBox options based on current record in column 7 strInput = Cells(r, 7).Value ' i.e. cell on worksheet with Flexion; Lateral Bending varZz = Split(strInput, "; ") 'create array of values using "; " as delimiter. For i = LBound(varZz) To UBound(varZz) ' loop through values...................
I've been trying (unsuccessfully) to return a value from the second column in a 4 column listbox, all I can manage to return is the numerical value for the row selected eg if I use: MsgBox listbox1.Value to try and return the result, it shows the number of the selected row in the msgbox.
I have a userform with 5 data fields. The first two are listboxes and the last 3 are textboxes. I have recently added the multiselect option to ONLY THE FIRST listbox (MeetingSpaceBox). I can get the multiselect listbox to output correctly. The problem is, though, that the rest of the data will only fill in the first row and will not be added to any of the subsequent rows. The data from the other 4 fields should remain constant for each selection in the first ListBox or at least until either "ok" or "clear" have been selected on the UserForm.
Do I assign all those valuables to variables and fill them in after the Multiselect listbox data has been added? I assume this will mean a change (or deletion) of the emptyRow code.
See my code below
VB: Private Sub CalcButton_Click() If AllDataEntered Then 'define empty row emptyRow1 = WorksheetFunction.CountA(Range("A:A")) + 1
Is it possible to get the multiselection the users make in the listbox correlate directly to the original cells the rows pertain to?
the reason is I need to be able to get the users to multi select the cells they want to print and then send print commands to the documents ancd drawings located in their hyperlinks. So if there was some way to pull the Cells selections then I could work with this indefinately. I''m unsure whether this is feasable, I was thinking of putting the multiselect results into an array using the text values then doing a vlookup or something, but the original drawing register sheet doesn't have unique items just unique hyperlinks :P I cannot manipulate the physical layout of the sheet itself as other macro's are located on these sheets.
I refer to the following article from last year, with a similar question. Multiple Selections Drop down list to one cell.
I would like to be able to choose multiple values from a list box and print them into one cell (or at least print them anywhere).
For example: I have a list with products A, B, C, D, E, F Those products are shown in the list box. If e.g. B, D and E are chosen, I would like to have this selection shown together in another cell. That means the content of the cell should be "B, D, E".
If I use the INDEX function (which works fine for single select list boxes), only one of the selected items is displayed in the cell and not even the one I selected.
When i tranfer my listbox content to sheet the selected item remain selected in listbox
Dim i As Long, j As Long For i = 0 To Me.ListBox2.ListCount - 1 If Me.ListBox2.Selected(i) Then j = j + 1 Worksheets("Workings"). Range("AA" & i + 2).Resize(1, 1).Copy Worksheets("Print").Range("B" & Rows.Count).End(xlUp).Offset(1) ListBox1.Selected(i) = False End If Next i
Ive made a worksheet with a userform and ListBox. The listbox is filled with names. If you click on the last button a msgbox with your selected names is displayed. If you select the button without a selection from the listbox a message pop ups to warn that no selection is made. If you select any name afterwards and click on the button the message still pops up unless you select the first entry from the list ("natalie") then the code is right executed. I'm struggeling with the code for several days. I wonder if by any change somebody wants to correct the code. (I've uploaded my sheet)
When I drag a text file from my desktop into an existing Excel worksheet it automatically creates a new workbook. I'd like to know how to modify this such that I can drop the file into my existing worksheet (and not have a new workbook create) and then run some VBA macros on it.
I have a spreadsheet where I often have to exchange pairs of cells. I currently do this by dragging Cell A to a blank portion of the sheet, dragging Cell B to Cell A's former location, then dragging Cell A to Cell B's former location. I was just thinking that I might be able to use VBA to allow me to drag Cell A to Cell B and have them "trade places".
I don't even know what events are involved in the dragging process so I don't know where to start.
I am looking to if there is anyway to move an image box using a mouse drag and drop action. I have put together a little example of what I am trying to work with and was wondering if anyone on here had any tricks to make this work.
I realise the drag and drop method only applies to the textbox and listbox but have seen some old code that can simulate the drag and drop by creating a border of some sort to illustrate where the image box is going to be placed and final just setting the properties of that image box to where the border is placed.
In the example type in a size in the width and height textboxs (I used 3000,3000) and then what I want to do from there is move the white box using the mouse within the blue box.
Private Sub Workbook_Activate() Application.CutCopyMode = False Application.OnKey "^c", "" Application.CellDragAndDrop = False End Sub Private Sub Workbook_Deactivate()
OR This one:
Option Explicit Private Sub Workbook_Activate() With Application .CutCopyMode = False .CellDragAndDrop = False
I noltice that one uses "Option Explicit" and one doesn't, one seems to be longer than the other, but when I tested both, they both seem to do the same thing. I did notice that neither one of them prevents a "paste" into the worksheet when something is copied from an outside source, but that is not a concern right now!!!
I am researching the possibility of using Excel 2003 WITHOUT a Cad or Drawing package to simulate a drawing. (Consultants inquiries are WELCOME). The idea is to prompt the user (Sales Rep or Customer) for a few key dimensions and then plot out a closed curve based on the coordinantes entered. This shape, which would need to be accurately scaled, would then be sectioned and used as a canvas for dragging and dropping various icons.
Why use Excel instead of CAD?
Other than "everyone" having it, the placement of the "icons" relative to the perimeter of the curve will be used to estimate material costs and generate a quotation like a configurator application.
Key hurdles seem to be the drawing of a curve with cells as pixels and using drag & drop with custom icons - possible as an Add-In?