I have a dropdown box with a few options in it. What I want to do, is have excel load a particular picture, that I have saved on my computer, into the background when a certain option is selected from the dropdown box.
View 9 Replies
I'm working on an excel table in which I have the following information:
Product
Date
Defect
Defect Picture
N65-P0421
09/15/2013
Broken tab
D:folderpicture.jpg
N65-P0322
09/16/2013
scratches
D:folderpicture1.jpg
I need a userform in which I choose the field "product" and it loads the picture from the path at "Defect Picture". Is it possible?
Can you Put a picture as a background for a cell?
View 1 Replies View RelatedMy macro generates some graph from some datas. Datas are in some range and when I filtering it shows only filtered values. I use Fixed axis (min and max) because if I use Auto it fit data to the window.
My problem is: I would like to use Auto axis because my layout would be better but bacground picture remains the same and it's useless. Background picture should change as I change filters.
example:
untitled.JPG
here is picture:
current situation is 1.
With Auto axis I get 2. (blue B and green D are filtered results)
And I would like to have 3.
Is it possible that background picture variate as datas variates?
how to correct the tiling of a picture set as a background on a worksheet? It would appear to start tiling at b2 rather than a1. the bottom of the picture starts on row 1 and the top of the picture then begins row 2. also column a shows the far right side of the picture and column b shows the start of the left side.
View 2 Replies View RelatedI want to add an image to a sheet. The image is to print but I want the data from that sheet to go over the top. I can't seem to get the image behind my data.
View 6 Replies View Relatedhow put picture into cell as background. it means, after it's done, if i click on cell, i must be able write into cell like before change. i dont want solution through comments or shapes because picture will be on top of cell. and not as background
View 7 Replies View RelatedI need to add a background picture to a spreadsheet that only shows on the print area.
This spreadsheet is being used as a pro forma invoice that can be emailed to customers for them to view & print as required.
At the moment I can add a background image but this appears throughout the sheet and not in the place I need it to i.e. the print area.
I'm trying to make a map of 14 regions where each region changes brightness depending on values in the worksheets. I think I've got this bit sorted. I'm planning on creating the map using a collection of tessellated shapes or images, and using VBA to alter the properties of each one to create a dynamic map.
The output of the individual maps from MapInfo, our GIS software, is in .png or .jpg. format, and come with a white background. Is there any way to either make the background transparent so multiple shapes can be tessellated effectively, or a way to crop the image to the area's border?
Either that, or does someone know a way to output from MapInfo in such a way to make this possible? (Granted, it's a long shot, but you can't blame a guy for trying...)
In Excel 2010, is there any way to paste a picture into a small picture/diagram box, and upon double clicking the picture it would explode to a larger size? And I guess double clicking it again would make it return to its original (smaller) size. I would be pasting several pictures into several different picture/diagram boxes and would need this to be a relative reference so that upon selection it explodes the appropriate picture?
View 1 Replies View RelatedI want to have a sample file in excel which store picture of student in comment, I did this, but when I want to insert picture the file dialog appears, and if I click cancel, then there is an error, why? If some one optimise the code it would be very nice
View 6 Replies View RelatedHow to make a text background on editable cells and print without text background?
View 4 Replies View RelatedI have done the above where when I select a picture name from a drop down list it displays the relevant picture in another cell by using the IF function in the named formula
My question is why cant I use VLOOKUP instead of IF in the named formula. When I use it it comes with an error.
i have saved some pictures in my excel sheet.
in the next sheet i want that when i write the picture name the picture will appear as vlookup helps in the getting text and nos. can i do this with pictures or i tried to get to much from excel.
I am putting together a price list in excel and using images and hyperlinks to jazz it up a bit - what I am finding is that if I insert a 25KB GIF image, the excel file grows in size by over 100KB
why is this disproportionate growth happening and is there a way around it - I dont want my Price List growing too large but need the images....?
I am not sure whether it can show a loading gif in the front when it executes the vba, after the executions , the loading gif will desappear.
for example here is a loading gif :
[url]
Over the weekend I did some edits to an Excel file on my home computer. This morning I did some edits to the file on my work computer. When I try to access the VBA code, I get the message "Error in loading DLL", which is error 48.
View 12 Replies View RelatedI am loading my UF combo box based on data in one of my sheets. I want in a way that if I keep adding to my data sheet, it would add with it.
For some reason it is not loading as I wanted to. I have tried as module and as UF code. Again, for some reason it is not loading.
Here is my code
I'm trying to load an array with numbers from 3 to SheetCount. If someone wouldn't mind giving me a nudge in the right dirrection, it'd be appreciated.
I have created a Excel userform. Since it has lot of controls, it takes good amount of time to load.
Is there a possibility of displaying a progress bar till the userform is loaded.
Google search has shown me ways to create a progress bar using Excel Forms. However, I am looking for a way to show the progress bar till the main userform is loaded.
I'm trying to achieve: -
I want to create a spreadsheet which will include a column with email addresses in it.
Here's my problem.......
I want users to be able to click on an email address (like a hyperlink) and by doing this open their mail client (in this case Microsoft Outlook) and send an email. I would like the mail client to load a specific template just by clicking on the link from Excel. I'm not sure if this is possible, but there doesn't seem to be many things you can't do on Excel.
The form is not uploading my dropdown box. I know I am missing something in the code, but I am not sure what.
View 4 Replies View RelatedI have a list of accounts that is constantly changing(could be anywhere from 50-7500) and on that same sheet I have a count formula that will count all the accounts. This sheet is not going to be visible to the user.
On another sheet, I have a form that pops up with some data entery. What I am trying to do is when the form pops up, for the number of accounts to show up in a text box. If anyone could help me with the VBA code id appreciate it. The worksheet name is "Accounts", the cell is T17, and the textbox name is just TextBox1.
I have ten customers who have multiple locations where we do work. On ourinvoice I want to use Data Validation (list option) to read the input "CustomerName", and then change the validation list in the "Job Reference" cell accordingly. For example if A1 is the customer name and A2is the "Reference" where the data validation list will be. Customer ABC has 3 locations, XYZ has 5, CompanyD has 4, and so on. The range for thevalidation array is C1:C5. ABC's list oflocations is located at A10:A15, that of XYZ at A16:A20, and Company D atA21:A25 (and so on, for the others). Howcan I load the data validation range (C1:C5) with the correct list from, forexample A16:20 based on A1 being customer XYZ?
View 1 Replies View RelatedI am using the following Macro to load a selected sheet:
Application.Dialogs(xlDialogOpen).Show
Windows("Prototype Worksheet.xls").Activate
Windows("Test Data.xls").Activate
Range("A1:U102").Select
Selection.Copy
Windows("Prototype Worksheet.xls").Activate
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Windows("Test Data.xls").Activate
Application.CutCopyMode = False
ActiveWindow.Close
This works fine as long as I load the file named Test Data, lolz, but on the line"Application.Dialogs(xlDialogOpen).Show", I actually select the file to be loaded. how can and what should I change on the line "Windows("Test Data.xls").Activate" to achieve this
and also
at the very end of the macro I want to close the loaded file without the save box coming up.
I am trying to distribute an app that uses MSCAL Control. I am including the MSCAL.ocx file in the setup file and it saves it to a dierectory. However, when the app runs it will not load the activex Control (MSCAL)
Application.VBE.ActiveVBProject.References.AddFromFile("c:Program FileBM ApplicationMSCAL.OCX")
I hope there's someone who's familiar with Bloomberg in this forum.
My problem is, I have a template which conducts checks with data extracted a Bloomberg Terminal. I want to ensure that all data has FULLY loaded before I execute the checks.
So is there a way to detect if data is still loading?
Like for example, I need data to load from A1:A100, but data has only populated until A50. In this case I need to know that the other 50 cells are still populating.
I've created a sheet to estimate a job project and now I am working on a new sheet to keep track of our estimated totals compared with actual expenses.
What I need is to make a macro that allows you to browse the PC and let the user select the excel sheet where all the Estimate Values are stored. These stored values are pulled up and posted onto the new workbook.
Please pull A1 from the estimate book and put it in B4 of the new workbook
I am using the GetSaveAsFilename function to save a file. I have the filefilter as "Excel Add-In (*.xla),xla", however when I save a file this way as an add-in, then try to load that add-in, I get the following error message.
'C:Documents and SettingsUser1DesktopBook3.xla' is not a valid add-in.
Does this mean that the GetSaveAsFilename is not capable of saving a valid xla file?
In a range of cells (A1..d8) which have background set with multiple colors. Is it possible to set another range of cells (H1..K8) whith the same backgrounds as the other range and so that if one cells background changes the cell in the second range whill also change to that new color?
View 11 Replies View Related
