I am trying to find value for a particular date and then sum this value with the value from the column next to it.
I can use hlookup to get the first value but don't know how to include the value of the next column to it.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedI've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I am trying to find a formula that would pick out a row from a matrix based on the values in the first column and then return to me each of the subsequent values from that row. I can't do a vlookup because there are a lot of blank cells and which columns have data changes. I've attached an example. The text in A1 will change and cells A3:B5 will show the corresponding values from that row along with the column title. I would prefer a formula to type in and leave in cells A3:B5 but if that can't be done VBA is okay too.
View 6 Replies View RelatedI have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedIs there a formula to isolate observations in the same column (different values) and also all have the same column heading like the file attached?
View 2 Replies View RelatedWhat i am looking to do is have column D display the value in column B...if column C is not blank. Here is an example.
View 4 Replies View RelatedI have a table with 3 columns. See below for data (ignore dashes):
COLUMN X-----COLUMN Y-----COLUMN Z
Project 1---------21 Dec 09---------$70
Project 2---------21 Dec 09---------$85
Project 3---------21 Dec 09---------$90
Project 1---------1 Jan 10-----------$85
Project 2---------1 Jan 10-----------$95
Project 3---------1 Jan 10-----------$110
As you can see, COLUMN X contains Project Names, COLUMN Y contains Dates and COLUMN Z contains Monetary Value.
Here is what I need to do: I need a formula/function that will lookup "Project 1" in COLUMN X and find the latest corresponding Date in COLUMN Y (for this example, 1 Jan 10) for Project 1 and then display the corresponding Monetary Value from COLUMN Z (for this example, $85).
I have tried using VLOOKUP, but since the data must be sorted it won't work. I tried using INDEX(MATCH), but can't get it to work. My goal is that the cell will be dynamically updated every time a user inputs updated data for a certain project based on the latest date.
I have a sheet that begining in A3 and going down need to look for the First Instance of the text String "Loan Documents" and down to the last instance and select the corresponding range in column B.
Example: if the Text String appears in Range(A14:A32) I need the Range(B14:B32) to be my selected range.
I have a file that I would like to lookup variable row and a variable column. I have tired vlookup and hlookup but these do not work because you have to specify a given column or row versus having that column or row be variable. Is there a way to do this.
Think of a set of times tables. I would like to input 8 and 9 and get 72 as an output. How could I go about doing this?
Or in the attached file, I would like to say A and 15 and get A15.
I'm trying to create a IF-formula that looks through a column with numbers and if i specific number (in my example the number 7) exist in the column the word PASSED should be written i the cell. I have tried to use =IF(A1:A5=7;"Passed";"") but it does'nt work.
View 2 Replies View RelatedI am trying to create a formula that will look up the data in Sheet 2, A3 and if found in Sheet 1 to then look up Sheet 2, C1 in Sheet 1 and then enter the data if found into C3. Is there a way to do this?
I have attached a sample workbook.
In my spreadsheet I have a column (C) that consists of 20 rows. Within this column a calculation is done with only one value (currency) that appears based on the calculation criteria. All other rows are 0 (currency) and the correct calculation can be in any of the 20 rows.
In an adjacent column (say E10) I want the appropriate value to be entered from column C.
I need a formula to lookup and retrieve data from a table of values. Given an EMP-ID in column A of the row that contains the formula and given a column name in row 1 of the column that contains the formula, I need to do a lookup. So, in effect, I am doing a lookup based on two values .. the column header and the row header.
I have attached a small model to illustrate what I need. Cell C-3 in the first worksheet will contain the formula to lookup and retrieve the value in cell C-7 in the second worksheet, based on the values in cell C-1 (column header = “Database Col 2”) and in cell A-3 (row header = “257”) in the first worksheet.
I use the sumproduct for the attached example. I know I have seen this somewhere on the forum where I can get a value based on a criteria from a row and criteria from a column, but I just can't seem to figure it out right now.
View 2 Replies View RelatedI have a list of numbers in column 'C' to lookup and if it is true, I need text "on schedule" to display in column 'D'. If it is false I need text "not on schedule" to diplay in column 'D'.
View 4 Replies View RelatedWant to type in a formula and copy it down through the column.
The formula should find the most recent final for the country listed in column A.
Country
Champions league final
Formula (Most recent final - country)
Spain
2012
?
[Code] ........
Worksheet 1
Food
Expenses
KFC
500
Pizza Hut
100
[Code] ......
In worksheet 2, I would like to lookup the type of food that have expenses at 500.
So the output column should look like table below.
Food
KFC
Wendy
Sushi King
Papa John
I have a list of values in column A (part numbers)
In columns B to E I have lists of similar values (part numbers, with row 1 representing their location e.g warehouse, office, etc).
In column F2 I would like to search for the value in A2 in the range B2:E100 and return the value in B1:E1 if the value appears... if it doesnt appear in any of the columns I would like 'not located' to appear in F2.
I've been trying to do this for a while but am making no progress at all.
I have data in one column which is text based (A, B, C, D, E) and in the accompanying column is a response (1, 2, 3, 4, 5).
I want to be able to find those who answered 1 and then group to letters - so if 'A', 'D' and 'E' replied '1' then I want the result of the formula to be ADE.
I have been doing this manually and just typing the results in from a print-out but am hoping I can automate and get Excel to do the work for me to eliminate inputting errors!
I have a spreadsheet with a list of thousands of products in Column A. In Column B, C, D, E, & F there are headers that read: Cincinnati, Dayton, Columbus, Toledo, Cleveland.
In the rows under these column headers it’s either blank or there is a 1. The value 1 represents usage of products (column a) in those markets (columns b thru f). I guess I could use a Y for yes but I used a 1 instead.
In another workbook, I have a short list of a dozen random products that I am trying to match up to the cities that use them. Is there a simple formula that would search for a specific product in column a & return the first market with the value 1 in the corresponding cell?
trying to figure this out for a while and I can't seem to get it to work.
I'm trying to do something like a v lookup but I need the data to match two columns and then to give me the value in the third column.
For example col M is age, col N is duration and col 0 is premium.
Say I need to look up the age, say in cell c3, and duration in b10 in order to get the premium for someone age 25 with duration of 4.
Ex. age in c3=25 duration in b10=4. i need it to spit out 150 in c10
data is
age duration premium
25 2 100
25 4 150
26 1 125
I have two workbooks used for periodically updating product pricing to wholesale customers, one of which has all the product computation info and the other all the customers and products they buy. There is one main sheet in the product information book that has all the products going down the first column with a code for each item. The headings of many of its columns represent variations in packaging. The combination of product and package variations result in the customer's unique price.
I am seeking to find the intersection of product and packaging using names rather than cell numbers. Right now I am able to use VLOOKUP with the product name and named range from lookup sheet but I seem forced to use the column number rather than column heading name. As there are a lot of columns it's easy to lose track or make mistakes. Column name would be much preferred. We are still using Excel 2000.
Example of current reference:
=VLOOKUP("productname",mainlist,24,0)
I would like to use something other than 24 for the lookup column, like 'packagename' instead. I have reviewed the INDEX and MATCH functions but haven't figured out how to accomplish what I am after. Incidentally, 'mainlist' is a named range in a separate workbook but referencing as shown above has worked without a hitch.
I use a vlookup function on some database to lookup some data. However the data that I wanted to lookup is actually on the third row. In my attached sample, I have some data in "source data" worksheet. Another worksheet "Ratio" is where I keep the lookup value. In this sample, I actually wanted to lookup the ratio of 0.7 for Geogetown. And 0.66 for Queenstown. Could the vlookup formula be modified or need some vba code to achieve this?
View 5 Replies View Relatedi'm trying to figure out how i could get the sumproducts or anyway to get this forumla work basically i'm trying to have the cost column to vary depending on the variable set on column d & e on the top basically ...
* if d7 is between d2 and e2 use cost 1 for the multiplication to generate H1.
* if d7 is between d3 and e3 use cost 2 for the multiplication to generate H2.
I'm trying to enter info in a cell based on what is entered in two other cells.
So I have a dropdown box for the species on another sheet as well as a dropdown box for rail sizes. Then I have to crossreference them to come up with an upcharge number. Sorry for my basic lingo. I hope it's understandable.
I am looking for a formula, to change from this
IF Formula located in Cell F15
=IF(E15=A15,B24,"")
to give the If a Range.
I thought it would simply be:
=IF(E15=A15:A39,B15:B39,"")
But all I get is Blank Cell.
B24 has a Value but it does not appear in F15,F16 and F17 respectively.
This formula in E1 has worked before. I have attached an example, in reality Column A and B have 2000 rows and column D about 250 randomized numbers out of Column B that need to be paired with their equal in Column A.
View 4 Replies View RelatedI have a book with multiple tabs in it. The first is a master customer file, including customer numbers. The next two tabs include multiple references to the same customers because they list multiple shipping addresses and contacts for each customer on a separate line. I want to be able to have the additional tabs refer to the master list and find the customer name, then return the corresponding customer # in the previous column for that customer. This is what I came up with: =IF(B:B=Sheet2!B:B,Sheet1!A:A,0). But the results simply returns numbers that increase by 1. It should repeat the same customer # for the number of times that customer name is listed based on how many addresses or contacts there are. What am I not doing right?
View 9 Replies View Related