I have a sheet that begining in A3 and going down need to look for the First Instance of the text String "Loan Documents" and down to the last instance and select the corresponding range in column B.
Example: if the Text String appears in Range(A14:A32) I need the Range(B14:B32) to be my selected range.
I'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedIf i have row 10-20 in column A filled, what vba code would i need to select a range in column C that selects rows 10-20
If that 10-20 rows in column A chnages to say 10-50 the vba code will select 10-50 in column C
I have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I have defined my last row and column by using:
lr = Sheets("week1").Cells(Rows.Count, "A").End(xlUp).Row
LC = Sheets("week1").Cells(1, Columns.Count).End(xlToLeft).Column
Now how do I select the range starting at A2 through the last used column ( LC ) through the last row ( LR )?
What is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI wish to collect an arbitary range of data in a column. Hence I wish to identify were the data begins (for example C10) and where the data ends (for example C22), and then copy it and paste it at another sheet. How to do that with VBA-code?
View 9 Replies View RelatedI'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedHow would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
Sheets("Sheet1").Select
Range("W1").Select
Range(Selection, Selection.End(xlDown)).Name = "Problem_Area"
Here is my spreadsheet
A B C D 1 Matt 5 4 75 2 Joe 25 23 66 3 Ron 31 33 82 4 Jim 22 45 91 5 Steve 99 100 11
I used the large function to find the top 5 greatest numbers. I have them ranked in another area below the first set of numbers.
100
99
91
82
75
I need to find some sort of formula to return the name for the appropriate number. For example, I need the cell immediately to the right of 100 to return Steve; 99 to say Steve; 91 to say Jim. The INDEX/MATCH formulas used for left lookups works only for a column. I would have to set the index/match formula individually for each column to the right of the top 5 numbers, and that defeats the purpose. I might as well just find the numbers and connect the names all by hand.
i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies View RelatedI have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.
1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.
How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.
setup:
Columns: c)6:00 AM, d)6:15 AM, e)6:30 AM
Rows: 4)tech1 Phone, 5)Tech2 Phone, 6)Tech3 Phone
What I am tying to do is to select the column that matches the time, for instance anything before 6 AM would select Column C, betweeb 6 and 6:14 still selects column C, 6:15 to 6:29 selects column D, Etc
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
I'm trying to write a formula that searches for the name of the column on one sheet, finds that column on another, then results in the column letter. So, ideally, if the first three columns in the first tab were "Team," "Name," and "Total," respectively, I just want a formula to search for "Name" and give me back "B."
I want to do this in case anybody ever moves the "Name" column, for example, from column B to column C -- so then it would search for "Name" again and change the range in the formula to "C" because that's where that data lives now.
Currently, I'm using it for a COUNTIF() function that is a very simple: =countif(indirect("'"&$A2&"'!K:K"),$B2), where A2 is the sheet name. The latter half of $B2 is fine -- but I would love to have a more complicated formula take the place of the range "B:B" in case the "Name" column ever got moved.
I would like to do a vlookup where the lookup value isn't in the first column of a range/table. Would I use index/match? For example, I have fields for vendor, part # and location in that order. I'd like to pull up location with a formula based on part #.
View 4 Replies View RelatedI have a table (A1:C5)
A1:C1 contain the table headers
A2:C5 contain the data
A6 contains the value I want to search for I use this formula to return the column header of A6 A6=INDEX(A1:C1,SUMPRODUCT((A2:C5=A6)*COLUMN(A2:C5))) Now, if there are duplicate values in A2:C5, this will return more than one column header What I need is a vba code to view a msgbox with all column headers returned in this case
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies View RelatedI have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg
I am trying to find a macro that look for last non empty cell in column A and them paste a formula/comment in all cells of column B.
View 3 Replies View RelatedI know that this could be a stupid question, but was wondering if it could be possible. I would like to select a column by a keyboard shortcut. If I would press a key combination adding the letter of a column as example F, it would select the whole column. I was trying to search for this in google, but no luck.
View 10 Replies View RelatedI have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedIs there a formula to isolate observations in the same column (different values) and also all have the same column heading like the file attached?
View 2 Replies View RelatedIn the attachment is a file, which allows me to specific a Column and hide. For Example enter "H" in the InputBox and Submit the Column "H" is hide.
What do i have to change in the code if i want to hide the "H" and the Column two columns next to "H". In this case "J".
HideColumn.xlsm
What i am looking to do is have column D display the value in column B...if column C is not blank. Here is an example.
View 4 Replies View Related
