Lookup Cell Value And Paste
Sep 23, 2009
in Sheet1 Col. A i hv some values like 101,102, 103.....9999. In Col. B i have enterd some value
In Sheet 2-Col A i have same value but not in same position of Col A of sheet1.and also some values in Col B but different than Sheet1. Now i want to add all values from sheet1 to sheet2 and than delete from sheet1 only of Col. b
Exp. IF cell "A1"=101 and if Cell "B1" = 50 in sheet1 than i want the macro for lookup the value of cell A1 of Sheet1 in to the sheet2 range A:A and than to paste value of Cell B1 of sheet 1 into range B:B
View 9 Replies
ADVERTISEMENT
Jun 28, 2009
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies
View Related
Apr 20, 2006
I am trying to vlookup. I want to copy and paste formulas instead of values. Can I use a formula like IF because VLOOKUP only returns the cell value?
Is there a way to return the formula instead of the value using VLOOKUP?
View 4 Replies
View Related
Jan 8, 2009
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
View 2 Replies
View Related
Oct 27, 2009
I'm looking to create a small section of VBA code on Excel 2007 that looks for a specific date on a column and then pastes a value on the correct row.
I have weekly dates in columns along the top of my spreadsheet on row 3:
C3 = 07/11/08
D3 = 14/11/08
E3 = 21/11/08
etc...
The row further down the spreadsheet that I wish to use is selected by previous code and could be any row number within column B.
I need a snippet of code that searches for a particular date along row 3, and then once it finds the correct column, it pastes the value in the corresponding cell on my active row.
For example, if my active cell/row happens to be on B18, and the date I'm looking for happens to be on L3, I need to paste a value into cell L18.
I imagine there needs to be some form of HLookup, but I've no idea how to implement this in VBA code.
View 6 Replies
View Related
Mar 18, 2009
I have a file with multiple sheets. Most of the sheets are named for states. I will import a worksheet monthly that has sales data that needs to be copied one line at a time and pasted to the correct company on the sheet that corresponds to the appropriate state. I want to do this by macro.
Here is what my sheets look like...
Arkansas
A B
Comp1 $1000
Comp2 $2000
Louisiana
A B
Comp3 $500
Comp4 $1000
Sheet3 - Import
A B C
Comp1 AR $500
Comp3 LA $500
Comp2 AR $500
What I want is a macro that will read each line in Sheet3 and depending on the state in column B, copy/paste/special/add the value in column C to the amount in column B for the corresponding company on the sheet for that state. In other words I would like to see..
View 9 Replies
View Related
Aug 21, 2009
I have a standard template worksheet called "Input" (the workbooks name is "Input Capture") which spans C12:U1100.
In addition I have a seperate worksheet which is based in an all entirely seperate workbook called "People Data" (the workbooks name is "Succession Planning") which again spans C12:U1100.
What I would ideally like is a macro which matches the value in column C and populates the entire row (much in the same way as a HLOOKUP, only pasting values) with the exception of columns M and Q.
View 9 Replies
View Related
Apr 27, 2009
I want to be able to lookup if anywhere in a cell contains a word from a list of words, and then provides an output.
Column G:
VAT payment
HMRC payment
Pay VAT
I have a table on the side that shows:
Column Y Column Z
VATHMRC
HMRC HMRC
ie. If anything in column G matches one of the words in Column Y, then output the Column Z. I have use a Vlookup that works for the first two, as VAT is the first thing, but dont know how to make it work if the key word is in the middle of the cell.
View 3 Replies
View Related
Jan 2, 2009
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
View 7 Replies
View Related
May 6, 2014
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
View 1 Replies
View Related
Feb 10, 2014
Expanding this code to make it do the following:
1. Start w/ "RULE-Table" sheet,
2. Take note of "TODAY" date,
3. LOOKUP date in "RULE-table"
4. Locate Coordinates found in Col D of RULE-Table,
5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY
6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date.
For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
"RULE-Table" sheet
A......B.........C................D.......
Row1.DAY....WK RANGE....QTR RANGE
2......1/1.......1...............B2,D7
3......1/2.......1...............B3,D8
4......1/3.......1...............B4,D9
5......1/4.......1...............B5,D10
6......1/5.......1...............B6,D11
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file)
A.......B......C....D....E....F...
Row1..Header..Hdr..Hdr..Hdr..Hdr.
2.......2.................................
3.......14...............................
4.......13...............................
5.......20...............................
6.......62..............................
7....................76.................
8...................184................
9...................375................
10.................410................
11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file)
A........B.........C.....D....E.....
Row1..Header..Hdr..Hdr..Hdr..
2...................20........410......
View 3 Replies
View Related
Jun 4, 2009
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
View 14 Replies
View Related
Jun 17, 2014
I have worksheet 1 and worksheet 2. I have a different list of names in column A in both worksheets. Some of the names in worksheet 1 are in worksheet 2, but only a partial list. Worksheet 2 names are not in any kind of order and the rows do not match up with worksheet 1. In worksheet 1, column B is filled with each person's email address. In worksheet 2, column B NEEDS to be filled with each person's email address.
Is there a way for me to take each name, sequentially, on worksheet 2 and find that same name in worksheet 1, then pull the email address from column B (beside the name) and copy it to that cell in column B of worksheet 2?
View 2 Replies
View Related
Mar 3, 2014
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies
View Related
Apr 18, 2013
I get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets.
sheet1.jpg
sheet2.PNG
View 4 Replies
View Related
Dec 19, 2013
Source tab contains vital information about some clients.
In the aggregated tab (Cell C10) I created a formula that pulls the Inflows from the source in a very specific array. So for client 1, this works fine. Now, if i copy my formula to the client 2 (Cell C14), it obviously wont go and look in the correct array in my source.
What i need to do is to be able to copy/paste my formula
[Code].....
(from cells C10 to CC10) to cells C14 to CC14, but when copied, the look up array changes to:
Formula: [Code] ....
I will have to fill this formula to at least 100 entries down, so i need to make it work with ease
The good thing is that all look up values in the source increase by a fixed number of rows (12). I tried playing with index/rows formula.. no luck..
Attached File : samplev1.xlsx
View 1 Replies
View Related
Nov 19, 2013
At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet:
A
B
C
D
E
123
012
234
789, 567
465
789
890
012
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
View 1 Replies
View Related
Apr 25, 2009
I need to find the value in cell range A:10 A:242 based on
the search criteria found in G:10 H:242
View 3 Replies
View Related
Jun 14, 2013
I'm looking for a formula that I can put in BA2 in a sheet called Data, and copy the formula down the column.
If Data AE2 is blank, Data BA2 should be blank.
If there is a number in AE2, the formula should look for the matching number in another sheet called Index, in Index column G. The matching number can be in any row, but will only appear once in the whole column.
For the row number that has the pair, look in Index column AG and copy the value in that cell to Data BA2.
Data
1
AE
BA
2
1
put 560 here
3
4
4
[code]....
View 2 Replies
View Related
May 31, 2012
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
View 2 Replies
View Related
Dec 2, 2013
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Jul 6, 2008
my destination cells will have formulas like:
='E:My WorkTestData[CCC.xlsx]Input'!$S$31
Everything works fine. But I don't want the destination cells to display the full formula, but the actual Value only
I thought of a way to build a script that first builds the formula to one cell then Copy Paste Special value of that Cell to my desired Cell.
But when the code runs The cursor moves back and forth all the time...
View 9 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Jun 23, 2014
I have a sheet of locations that runs left to right. Under each location, their is a contract number (Example: AA, BB, CC...) with a corresponding value two columns to the right (Example: 11, 22, 33).
I can't figure out how to structure a lookup formula that will retrieve the value that corresponds to the contract. Here is an example: example.xlsx
View 3 Replies
View Related
Mar 5, 2010
I am using the formula =IF(ISNA(VLOOKUP($B8,'Volume Totals'!$A$5:$AH$163,32,FALSE)),0,VLOOKUP($B8,'Volume Totals'!$A$5:$AH$163,32,FALSE))
Is there a way to change this so that it looks in cell A1 and if the value = LASG then it uses the following formula :
=IF(ISNA(VLOOKUP($B8,'Volume Totals'!$A$5:$AH$163,43,FALSE)),0,VLOOKUP($B8,'Volume Totals'!$A$5:$AH$163,43,FALSE))
Otherwise use the origional formula ?
View 9 Replies
View Related
Sep 7, 2012
I am working on a database and trying to remove duplicates. When there are duplicates, I want to take the contents of one cell and copy them as a comment on the cell above (or below).
I tried to work on a small macro to do so, but the contents of the cell cannot be copied (it comes out as a blank).
The long way is to 'double click' in the cell, Ctrl+A, cut, click the cell above, Ctrl+F2, paste. This way is very long as I have thousands of duplicates.
View 4 Replies
View Related
Jun 16, 2014
Sheet("Dump1") has a series of data in duplicates in column E.
E.g. Pending Client
Pending Client
Pending Third Party
Pending Employee
Pending Third Party
Pending Client
And any other dynamic Comments.
I am trying a VBA which would count the serious of occurrences and paste the value with its name in Sheet("Status") Column A13 and below.
Like.
Pending Client 3
Pending Third Party 2
Pending Social 1 ( If it founds in data )
I cannot use the formula here to count, because I am not sure what all pending status will be there at given point of query.
View 4 Replies
View Related
