I am trying to vlookup. I want to copy and paste formulas instead of values. Can I use a formula like IF because VLOOKUP only returns the cell value?
Is there a way to return the formula instead of the value using VLOOKUP?
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
If I have a cell lets say A1 with a formula in it say "=A2" how do I copy A1 into A3 so that A3 will contain the text =A2 (and not the formula)?
i pull the formula of o21 to o22
o21 has formula =IF(J21>=U21,1,"")
022 has formula =IF(J22>=U22,1,"")
and basically u21 and u22 are "=s20"
so may i know what formula i should use to simplify o21 and o22 so that i do not need to use u21 and u22
i cant use =IF(J21>=U$21,1,"") because if i copy this formula and paste to other cell, it will always refer to U$21...
I have a drop down list. When I choose something from the list, it creates a description (text) in the next cell. I need to be able to copy/paste the text from the cell, but it will only let me choose the formula instead.
View 4 Replies View RelatedI have one sheet with all the formulas for the entire workbook and would like to copy and paste the formulas from Sheet 1 to Sheet 2...Sheet 1 to Sheet 3 etc. without changing the cell referening in the original formula. I am not too sure how .formula works.
Sub CopyAndPaste()
' To copy formulas from Summary sheet to their respective sheets
With Worksheets("Summary")
.Range("R3").Copy Worksheets("2").Range("X3").Formula = Worksheets("Summary").Range("R3")
End With
End Sub
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
I have a standard template worksheet called "Input" (the workbooks name is "Input Capture") which spans C12:U1100.
In addition I have a seperate worksheet which is based in an all entirely seperate workbook called "People Data" (the workbooks name is "Succession Planning") which again spans C12:U1100.
What I would ideally like is a macro which matches the value in column C and populates the entire row (much in the same way as a HLOOKUP, only pasting values) with the exception of columns M and Q.
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
Expanding this code to make it do the following:
1. Start w/ "RULE-Table" sheet,
2. Take note of "TODAY" date,
3. LOOKUP date in "RULE-table"
4. Locate Coordinates found in Col D of RULE-Table,
5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY
6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date.
For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
"RULE-Table" sheet
A......B.........C................D.......
Row1.DAY....WK RANGE....QTR RANGE
2......1/1.......1...............B2,D7
3......1/2.......1...............B3,D8
4......1/3.......1...............B4,D9
5......1/4.......1...............B5,D10
6......1/5.......1...............B6,D11
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file)
A.......B......C....D....E....F...
Row1..Header..Hdr..Hdr..Hdr..Hdr.
2.......2.................................
3.......14...............................
4.......13...............................
5.......20...............................
6.......62..............................
7....................76.................
8...................184................
9...................375................
10.................410................
11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file)
A........B.........C.....D....E.....
Row1..Header..Hdr..Hdr..Hdr..
2...................20........410......
in Sheet1 Col. A i hv some values like 101,102, 103.....9999. In Col. B i have enterd some value
In Sheet 2-Col A i have same value but not in same position of Col A of sheet1.and also some values in Col B but different than Sheet1. Now i want to add all values from sheet1 to sheet2 and than delete from sheet1 only of Col. b
Exp. IF cell "A1"=101 and if Cell "B1" = 50 in sheet1 than i want the macro for lookup the value of cell A1 of Sheet1 in to the sheet2 range A:A and than to paste value of Cell B1 of sheet 1 into range B:B
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View Relatedwhat is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I have a supply worksheet that is set up where the new data is added into a new column, so that the report extends horizontally. All of the pricing is in Column I, quantities are listed in the new column, and then totals at the bottom with the following formula:
=(SUM(AF7:AF10)*I7)+(AF12*I12)+(AF13*I13)+(SUM(AF15:AF18)*I15)+(SUM(AF20:AF23)*I20)
When I copy and paste the cell, into the next column for a new order, it changes the quantity column from "AF" to "AG", which I want it to do, but it also changes the pricing column from "I" to "J". I then have to go in manually and change all the J's to I's. When I copy the just the formula, it keeps everything the same, and then I have to manually change "AF" to "AG".
Is there a way to copy and paste so that the pricing column stays fixed within the formula, but the quantity column changes?
I need to copy a formula that is entered into a cell via a macro and copy it down to the bottom of my data. Now the ROWS never change but the Columns change every week as new data is needed to be entered. The code I am using to enter the formula is:
Dim MyLastColumnWip As Interger
Cells(3, MyLastColumnWip).select
ActiveCell.FormulaR1C1 = "= SUM(RC10-RC[-5]"
This works fine for that specfic cell but i now need to copy it down. An example of my spreadsheet is:..............
how to make my macro copy ONLY the Value it finds in a cell, and then paste ONLY the value into another cell on another sheet, while retaining the DESTINATION cells's formatting, font, size etc... I know how to do all of that except get it to copy and paste ONLY the values and not the cell size, formatting etc...
View 4 Replies View Relatedway to copy and paste a formula into every other blank row?
The formula will be staying in the same columns the whole way down the sheet. Eg: A1, A2, A3 ..... ETC
I m finding the last used column and pasting a formula in the same row to the last column. Here is what I have used and it isn't working.:
View 5 Replies View RelatedI have a spreadsheet that calculates a rolling percentage of a row of numbers. The formulas are contained in two columns, J and K. The first row is a header row, and the formulas repeat every 52 rows (e.g. J2:K53, copy paste those cells, re-paste at J54, then J106, and so on. Because I don't know how to loop, I've had to manually right in the paste every 52 rows in my line of code. Surely there is a way to have this cut down and to actually stop when there are no more rows of data. For the record, this continues on manually until 80,000 because I don't know how to stop it at the last row.
Code:
Sub CopyPasta()
'
' Copy_Paste_52 Macro
'
'
Range("J2:K53").Select
Range("K53").Activate
Selection.Copy
Range("J54").Select
[code]....
I would like a formula or macro that would recognize an answer to a question and populate a group of headings in another sheet.My thought is it would be copy and paste related.
Specifically, =If(sheet1A1=2013, then show January 2013, February 2013, March 2013 etc in Sheet 2A1-A120.
I would have all these months written out somewhere else to be copy and pasted.
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
I am trying linking it and this what I am trying to do , need a formula for it.
E.g.
Sheet 1 cell J3= Sheet 2 cell K3
Sheet 1 cell J4= Sheet 2 cell K9
Sheet 1 cell J5= Sheet 2 cell K15
and so on.
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies View RelatedWe have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following
Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100
If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.
From time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
Go to worksheet z and press the command button.
I got the code from this site: ...
I am looking for better way to copy formula and paste it to dynamic table (I dont know how many rows there is at the table). The procedure takes long time for the user. (the table may contain more than 30,000 rows !!).
View 3 Replies View RelatedI have a vlookup which checks another sheet and imports data. The formula is as such:
=IF(ISNA(VLOOKUP(B17,Data!A$1:$C$40,3,FALSE)),"",T(VLOOKUP(B17,Data!A$1:$C$40,3,FALSE))) .
The problem I have is when I paste and amend data on sheet Data! it changes the formula to
=IF(ISNA(VLOOKUP(B17,Data!A$1:$B$40,3,FALSE)),"",T(VLOOKUP(B17,Data!A$1:$B$40,3,FALSE))) .
How do I prevent it from doing this?
I need to copy certain columns from one sheet to another sheet based on a formlua on the date.
So, on 'Master Sheet' I have a column called 'Date'.
I would like a formula, or macro, which does the following.
If date (column D) is over 2 weeks old (today's date - 14 days) then copy columns A, D, S and T to another work sheet called 'Not Attended' and paste them into columns A,B,C, and D.
I have a workbook with ~80 sheets. One sheet is a summary sheet containing data from each of the other sheets. The formula to display the data is pretty easy, but I need a function to copy the formula but increment the worksheet reference in each cell.
For example:
the formula in one cell is ='17'!$AI$6
The next cell should be ='18'!$AI$6
and so on...
I have about 12 columns like this, so I really don't want to edit each of them individually.
I'm working in Excel 2010 on a sheet that will be compiling data from a different worksheet based on the current month. I'm using the formula:
=IF(INDIRECT($K$7&"!C45")>"",INDIRECT($K$7&"!C45"),"")
to complete the field using the other sheets value if it's not empty, where $K$7 references a worksheet name based on the previous month.
It's working just fine, but I want to copy and paste it into other cells having the referenced cell, C45, change as I move it around the sheet (if I copy and paste it 3 cells to the right it would become =IF(INDIRECT($K$7&"!C48")>"",INDIRECT($K$7&"!C48"),"").
I haven't been able to find a way to make the C45 cell reference dynamic while copying and pasting. It would save me a ton of time if I could.