Lookup Cell Value Based On Cell In Another Sheet
Jun 14, 2013
I'm looking for a formula that I can put in BA2 in a sheet called Data, and copy the formula down the column.
If Data AE2 is blank, Data BA2 should be blank.
If there is a number in AE2, the formula should look for the matching number in another sheet called Index, in Index column G. The matching number can be in any row, but will only appear once in the whole column.
For the row number that has the pair, look in Index column AG and copy the value in that cell to Data BA2.
Data
1
AE
BA
2
1
put 560 here
3
4
4
[code]....
View 2 Replies
ADVERTISEMENT
Oct 18, 2013
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
View 6 Replies
View Related
Apr 25, 2009
I need to find the value in cell range A:10 A:242 based on
the search criteria found in G:10 H:242
View 3 Replies
View Related
Oct 29, 2013
In Sheet2 I have a list of cell addresses showing values such as D5, D32, D59, D221, D869 stored in cells AB7:AB16. In Sheet1 the "D" column holds dates. I want to return the corresponding date for each D# cell into Sheet2 in column AC7:AC16. I'm unaware of the proper syntax for this. I though it would look something like:
='Sheet1'!('Sheet2'!(AB7))
however that doesn't work.
View 2 Replies
View Related
Mar 2, 2007
Lets say that you have three cells. The contents of the cells are 1, 2, 3. The contents 1 and 2 have the strikethrough and 3 does not.
How can you perform a lookup from within another cell to find the cell whose content does not have the strike through? (This could also be a search based on finding the cell that does not have the red background etc...)
View 11 Replies
View Related
Jan 24, 2008
In my sheet I do a vlookup for the value in column A in another worksheet. What I would like to do is depending on a value in column C the vlookup would look in a different worksheet. So if the value of "C1" were "AP" the vlookup would go to, for example, table1.xls/sheet1. Say down the line I wanted to change the value of "C1" or the value of column C in another row was "GNR" the vlookup formula would look to table2.xls/sheet1.
View 4 Replies
View Related
Jan 21, 2008
i have 2 sheets in my excel workbook. in my second workbook i have the values as follows
A B
ss 10
yy 20
zz 30
so in my first sheet values:
X Y
(List)
ss
yy
zz
in my first sheet X range i have list which consists ss,yy,zz
so i f choose ss from the list it has to check the valu for ss in sheet2 and has to fetch 10 and display in Y range
my excepcted output:
X Y
(List)
ss 10
View 9 Replies
View Related
Aug 5, 2013
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
View 1 Replies
View Related
Oct 24, 2007
I am trying to create conditional formating of a cell based on the value of another cell whish is linked to another sheet. I an using the "The formula is =$AA$30=1" where the cell AA30 is the cell linked to the other sheet. the problem is I have to do thiss for approx 200 cells ie =$AA$30=1, =$AB$30=1, =$AA$31=1, =$AB$31=1 --- =$AZ$42=1. Do I have to enter the formulea for each cell or is there a way to automate this?
View 2 Replies
View Related
Apr 28, 2014
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
View 5 Replies
View Related
Jun 13, 2013
I am working on a workbook with 200+ sheets and an index linking to each of the sheets. On the sheets there is a cell containing the results of calculations and I need the cell referencing the sheet in the index to change background colors depending if the calculations value is greater or less than 0. I currently have working code that also changes the tab color of each sheet depending on the value, but i am trying to add the index cell background change functionality into that. also, the index listings is subject to change. my working code is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("d34").Value < 0 Then
Me.Tab.ColorIndex = 3
ElseIf Range("D34").Value > 0 Then
Me.Tab.ColorIndex = 4
Else
[Code]...
and the code i am trying to get working is
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngX As Range
Set myRange = Worksheets("Index").Range("A1:A500").Find(Range("C2").Text, lookat:=xlPart)
' the C2 is the reference the title that would be on the index
If Range("d40").Value < 0 Then
[Code]....
I keep getting the runtime error '1004: application-defined error or object-defined error the thing is, i ran the cell background changing code in a normal macro before integrating it in my other worksheet code first and it worked fine. I have a little code experience, though not much in vba and I am unsure what the issue is. if there is another better way to accomplish what I'm tring to do, that would also be fine.
View 4 Replies
View Related
Aug 11, 2009
I have a spreadsheet an excerpt of which is as follows:
K L M N
1 Doors Security Vehicle Key
2 TRUE FALSE FALSE FALSE
3 FALSE TRUE TRUE FALSE
4 FALSE FALSE FALSE FALSE
Want I want to happen is to return the column header where there for a cell which contains "TRUE" in a blank column. If there isn't a cell with the value "TRUE" then to return "N/A". In the above example in blank column P for Row 2 would be "Doors", Row 3 would be "Security,Vehicle" and Row 4 would be "N/A".
In my actual spreadsheet I have 12 columns (L to W) which have the TRUE or FALSE values.
I know it has something to do with either HLOOKUP, INDEX and MATCH but can't seem to get it right. Any ideas?
View 4 Replies
View Related
Oct 24, 2005
I have a 3 column table with 20 rows. The first two columns contain travel
expense data. The cells in the third column are blank exept for whichever
cell I enter an "x" in. Please let me what formula or worksheet function do
I use to calculate the travel expenses based on the data in the first two
columns that correspond to the row of the cell with an "x" in the third
column?
View 9 Replies
View Related
Jan 4, 2009
I need the array portion of a lookup formula to change based on a cell value.
On a worksheet(named "groupings")that groups students according to ability level, I have data validation lists where teachers select the criteria for the group. In cell I5 they choose the period, and in cell L5 they select which assessment to look at.
Cell B8 will either say high low or medium. Then in cell C8 I have this formula: Lookup_Occurence($B$8, ??????, 1,1,2)
Again the array will depend on what is entered in cell I5 and cell L5.
I have attached one of the worksheets the lookup_occurence will be referencing. In this exit card worksheet if cell B10 (the name of the assessment) matches what the teacher chose in cell L5 on the groupings worksheet, then the array formula will be 'Exit Card'!Card1. If cell G10 matches what the teacher chose in cell L5, then the array would be 'Exit Card'!Card2. Where A9:C339 is named Card1 and cell F9:H339 is card2 etc.....
However, it gets even more complicated then that because within Card1 there are 8 periods, and if a teacher chose period 1 in cell I8 on the groupings sheet, then I only need the array to look at the period one data in the card1 array.
Essentially what I am trying to accomplish is create a page where teachers can group students by ability level according to any assessment they choose. On the exit card page the formulas currently equaling # Div/0 will say either high, med, or low depending on how a student performs on that assessment.
View 9 Replies
View Related
Aug 24, 2006
I want to be able to send out one “master” workbook with the fourteen ranges, and use a pull-down list (or anything else) so when the user selects a state, the proper lookup range will be used. In the attached abbreviated example, I want the lookups in Column B to refer to the state designated in B2. In this case, the VLOOKUP works correctly, since Colorado zip codes are in the ColZip range.
The people in Idaho or Oregon using this will only be working with their respective zip codes in ranges IdaZip or OreZip, so if they enter their state in B2, I would like the VLOOKUP to look in a different range. My whole idea is to only have one master workbook so I don’t have to create one for each district office. Maybe I’m thinking in a wrong direction altogether.
View 3 Replies
View Related
Sep 9, 2006
I am setting up a worksheet (1) with a full list of part numbers supplied, cost etc. ie:
Part Description Price Qty
1234 Blah Blah £1.00 1
1235 Blah Blah £3.00 0
1236 Blah Blah £2.00 2
And I have set up a seperate worksheet (2) as an invoice. What I have been trying to do is when I enter a qty in worksheet (1), worksheet (2) will reconise an entry in the qty colum an copy selected fields/ cells. I can do a "=" or use an "if" statement looking at anything greater than "0". but is there a way I can get the invoice worksheet to ignore any lines with "0". So it will only copy over the information with only qtys for the invoice ?.
View 2 Replies
View Related
Apr 22, 2014
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
View 1 Replies
View Related
Apr 5, 2006
I have a worksheet(Shed) and the range where numbers will be entered are B3:E46. In another sheet(Location) I have a in column A "Shift #", B "Shift Bus #" C "Location". what I am attempting to do is when a bus number is entered into Shed! ie.. b3=900, d15=350 etc.... Location! would lookup ie.900 in the Shed! and match it to Location! (column B) and from there provide the cell ref in column C. So I could then print Location! that would give me in Shift # order where each Bus # the shift is assigned to.
View 13 Replies
View Related
May 9, 2014
Code:
Private Sub GetColData()
Dim SrchRng As Range
Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
View 1 Replies
View Related
May 8, 2014
I used this vba code before:
[Code] ......
And it worked perfectly, but now i wanted to use it in an other file but just change the sheets and I keep getting an Error 13.
It should copy the data from sheet insertmeasurements c23 till end of data in the column next to it (is dynamic) and based on cell B1 and the matching category code in column B, put that data in the matching cell in column C to the matching cell (based on the criteria in column B and C) on the sheet storedata.
Attached File : Profitibility Database v1.4.xlsm‎
View 1 Replies
View Related
Apr 2, 2007
I want to tie the values of some cells on Sheet 2 to what's put in into corresponding cells on Sheet 1. Example
If Cell B3 on Sheet 1 has the string "B off" put in, Sheet 2 should automatically get "R1" in cell B12, "B off" in cell C12 and "ID123456" in cell D12. If cell B3 on Sheet 1 is empty, B12:D12 should be blank.
View 4 Replies
View Related
May 26, 2009
I have an items list on page 2. On page 1 I want to create a drop down menu in C2 that references the list on page 2. Then when I choose an item, I want the additional information in cells D2 and E2 to come in automatically. The list on page 2 will be expanding daily, and when I expand it I can simply insert a new row so I correctly alphabatize it instead of constantly having to resort it.
With that said....
1. How do you put in the drop down box that references information on a different sheet?
2. What is the best way to reference the information in my ever expanding situation: Index/Match, Vlookup, Lookup, or something I havent mentioned?
View 14 Replies
View Related
Dec 4, 2013
I am trying to hide/unhide columns based on what is return to cell C2 from this lookup (=VLOOKUP(B2,GM!E2:M129,9,FALSE)). It can only return 3,6 or 9
If it returns 3 I want to hide columns I:P
If it returns 12 I want to hide columns E:L
If it returns 6 I want to hide E:H and M:P
I have been trying to work with this code which I found on this forum but I haven't been able to get it working fully. It only works when C2 is entered rather than calculated and I can't get it working for the M:P part of the third option.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Changed As Range
Set Changed = Range("C2")
If Not Intersect(Target, Changed) Is Nothing Then
Range("A:Z").EntireColumn.Hidden = False
[Code]...
View 1 Replies
View Related
Apr 8, 2008
I want to change the color of worksheet tabs based on a cell's value. The following code works great, except I can only seem to get it to work when using "$A$1" as the cell's address. When I give the cell a defined name at the sheet level it does not seem to work. I want to be able to use the same code on varying worksheets that will have the cell in different locations. How should I be calling the cell using the defined name?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$1" Then
Select Case Target.Value
Case "Men"
Me.Tab.ThemeColor = 5
Case "Women"
Me.Tab.ThemeColor = 6
Case Else
Me.Tab.ThemeColor = 2
End Select
End If
End Sub
View 5 Replies
View Related
Jan 14, 2009
I have a UDF for a lookup_occurrence formula (thanks to Dave), and I was wondering if it was possible to tweak the range it looks at with if statements.
I have a formula like this =Lookup_Occurence(B13, INDIRECT($N$5), 1,1,5) where N5 says exit card 1.
I need it to only look at a certain rows within exit card 1 depending on the value entered in I5.
If value I5 says Period_1 it will only look in rows 12:46.
If value I5 says Period_2 it will only look in rows 48:82 etc.
I believe I need to modify the xl look part of the code with if statements.
Below is the code. I am wondering if I can replace the xlLook line with nested if statements. If I5="Period_1 then rows 12:46" etc.
Function Lookup_Occurence(To_find, Table_array As Range, _
Look_in_col As Long, Offset_col, Occurrence As Long, _
Optional Case_sensitive As Boolean, Optional Part_cell_match As Boolean)
Dim lLoop As Long
Dim rFound As Range
Dim xlLook As XlLookAt
Dim lOcCheck As Long
View 5 Replies
View Related
Jan 8, 2009
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
View 2 Replies
View Related
Mar 27, 2008
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies
View Related
Feb 4, 2008
I am looking for a way to do what i would call a dual vlookup.
i have some data in a number of sheets and need to do some consolidation into a summary sheet. problem is, not all the sheets have data in the same columns and rows but all the data is the same.
what i am trying to do is something like
vlookup("a",sheet2!A:M,***need to put the column of the data here***,0)
i cant just put in the column number because it changes on each sheet, need some way to do another lookup there, like an hlookup or something, so that i could lookup which column contained 'sales' and return that number so it can be put into the vlookup.
View 9 Replies
View Related
Oct 20, 2013
I need to copy the corresponding sheet based on the value in D3 in sheet1 (which it has the sheet name) and copy that sheet and paste it on sheet1 A7.
View 1 Replies
View Related
Jun 21, 2008
can a macro hide a worksheet if a cell in the sheet that I want hidden has a certain value?
View 9 Replies
View Related
