Replace Cell Contents Based On Matching Data In Another Cell (On Another Sheet)?
Apr 28, 2014
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
View 5 Replies
ADVERTISEMENT
Jun 17, 2008
I have a workbook called "Staff Planner". I need to check Columns C to I in Sheet "Plan" to firstly find text in a red font, and then copy this value to Sheet "Useage" in Column K. (So, search C1:I1, find red font, copy contents of cell, paste value to K1). I then need to repeat this with blue font/value to H1, green font/value to E1, and finally pink font/value to B1
View 9 Replies
View Related
Mar 19, 2009
I have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies
View Related
Feb 10, 2014
I have a master sheet where users can change the name of 20 different sheets in the workbook by changing a cell value on the master sheet. Here is the code:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rCell As Range
If Target.Cells.Count > 1 Then Exit Sub
[Code]....
The next step which I am having issues with is hiding the sheets. I want all sheets in the workbook to be hidden except for the master. I only want the other sheets to be visble if the user inputs a name on the master sheet.
So if the cell contents on the master sheet, say "B9", is blank, the sheet in the workbook that corresponds to that cell will remain hidden. If the user inputs anything, say "Sheet1", in cell "B9" on the master sheet, I want that sheet to become unhidden and to be named "Sheet1"
View 2 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Jan 12, 2007
In the attachment, I have two different workbooks named 1099 and SJC. What I would like to automate if possible is to have Column F in 'SJC' autofill by matching the Vendor # (Column A) values to the '1099' Account Number (Column A). The values that need to be copied cover are located in Column C. Hope that is clear enough.
As an example:
I've highlighted one row in yellow to show what I need done. For Vendor No. A1W01 from '1099', the value I need copied over to Column F of SJC is 920.61. I need this automated because I have a collection of files like this that I need to link in this way and they are all quite large (the attached versions are stripped in order to meet the size requirements at this forum).
View 3 Replies
View Related
Apr 3, 2007
I want to have a macro that will look at a few cells say A1 & A2 and then use the contents of the cells say 1Q07 & 2Q07 respectively to do a find and replace find 1Q07 and replace it with 2Q07. I want it to use the contents of the cell and not just the text because the contents of the cell will change each time used. I tride to do it here but I dont have it yet. It doesnt seem to pass the value to the variable and the variable doesnt seem to do the find and replace.
Private Sub Update_Click()
Application. ScreenUpdating = False
Dim quarter As String
quarter = CStr(txtquarter.Text)
txtquarter.Text = CStr(quarter)
Sheets("Income Statement").Select
Dim oneq As Single
Dim twoq As Single
Dim threeq As Single
Dim fourq As Single
Dim fiveq As Single
oneq = ActiveSheet.Range("A2").Value
twoq = oneq - 1
threeq = twoq - 1
fourq = oneq - 4
fiveq = oneq - 5
View 9 Replies
View Related
May 9, 2014
Code:
Private Sub GetColData()
Dim SrchRng As Range
Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
View 1 Replies
View Related
May 21, 2009
Im hoping there is an Excel Formula (not VBA Code) solution to this problem.
I understand how to use the Substitute command in Excel, but I would like to be able to provide a list of words and have the Substitute command use that list to replace every occurrence within a given cell with a blank ("").
The twist to this is, that the List of Words will be Dynamic, and thus the formula will need to account for that.
NOTE: the formula should NOT replace parts of words, e.g., if the List Word is "can" and the cell to be evaluated contains "candle" the formula should NOT replace the "can" in "candle" with "". Only whole word matches should be replaced.
View 9 Replies
View Related
Apr 15, 2014
I'm am trying to set up a household finances dashboard in excel - What i'd like to do is categorise & tag HH expenditure based on part of the description within a bank statement, the desired result being:
account tagging.jpg
My ideal solution would be some kind of lookup with a table containing the keywords & corresponding tags to match part of the description to, as this will allow easy management of the tags, situations where I have multiple keywords for the same tage (supermakets for example), and so forth. Is this possible?
Currently I am using a very large nested forumula which i've cobbled together based on searching for ideas. It works, but managing new tags is difficult, part of the formula i'm using is:
=IF(ISNUMBER(FIND("00111888",'JOBSFPCUR-20140414'!C4)),"Pete transfer",(IF(ISNUMBER(FIND("LAURA",'JOBSFPCUR-20140414'!C4)),"Laura Pocket Money",(IF(ISNUMBER(FIND("TESCO",'JOBSFPCUR-20140414'!C4)),"Supermarket")))))
View 2 Replies
View Related
Dec 19, 2012
I am trying to see if it is even possible to have data validation applied to a specified range of cells, but if the value of cell 'B3' is '1' then the data validation will not run on the other cells (H4:G7)
View 2 Replies
View Related
Mar 24, 2007
I am trying to write a macro to do the following: Loop through a range of cells on a worksheet Sheet1 M17:M46 and if there is text in the cell then Copy all the data to the left Of Coumun M in the same row and paste the values to the next open row of a range A17:L46 on another worksheet (sheet2.) Basically the text in column M is an idicator to add the data to an order sheet. If there is no text don't add the data , look in the next row etc.
I'm not sure if this is the way to go
Sub CopyRows()
Worksheets("sheet1").Select
FinalRow = Range("M65536").End(xlUp).Row
' Find the last row of data
' Loop through each row
For x = 2 To FinalRow
' Decide if to copy based on column M
ThisValue = Range("M" & x).Value
' could be any value
If ThisValue = "yes" Then
Worksheets("sheet2").Range("A" & x & ":L" & x).Copy
Worksheets("sheet1").Select
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.PasteSpecial = xlValues
Worksheets("sheet1").Select
End If
Next x
End Sub
View 4 Replies
View Related
Dec 12, 2012
i want to search OK7V0T in all cells and return the cell reference beside matching data row
serial 1serial 2serial 3
box-4OK4KCUOK4KI0 OK4LLS
box-4OK60ZDOK62AP OK62QU
box-4OK6TA5OK6TBP OK6TFW
View 4 Replies
View Related
Apr 9, 2008
I want to set up a sheet macro that will replace the contents of a cell (when a specific number is typed in) with a specific formula.
For instance, when "43" is typed into any cell within specified columns (say columns C and H), it changes to the following formula: =IF(D47="",43,IF(D47<=3030,408,43))(WHERE D47 WOULD REPRESENT THE CELL ADJACENT TO THE CELL WHERE "43" WAS TYPED.)
IE:
If "43" was typed into cell C1, then it would change to the formula: =IF(D1="",43,IF(D1<=3030,408,43))
If "43" was typed into cell C50, then it would change to the formula: =IF(D50="",43,IF(D50<=3030,408,43))
View 12 Replies
View Related
May 2, 2008
I have created a desk planning spreadsheet in excel. Each week a mailmerge sends out an email to everyone in the office asking them to confirm when they will need a desk in the next week.
As the normal employee doesnt get involved in desk planning I want them simply to state whether they will be in the building or not by entering "GH" (our building) in a cell under each day in the email they get sent.
When the reply comes in we select the cells from the email and then paste them into the desk planning spreadsheet.
-----
WHAT I NEED TO DO:
Select some cells (must be in the same row - that we have just pasted in).
Press a button on the Worksheet labelled "Auto Assign Desk", which does this:-
For each cell that contains "GH", replace with the right-most cell to the left of the selection that starts "GH_"... (this is the start of a unique desk reference (GH_1_1, GH_1_2,etc.)
-----
This will assign the employee to the desk they were sat at last, when they are in the office next week.
View 7 Replies
View Related
Mar 12, 2014
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies
View Related
Oct 5, 2009
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with
If Me.cmbtype.Value = "Tool" Then
Set ws = Worksheets("Tools")
ElseIf Me.cmbtype.Value = "Guide" Then
Set ws = Worksheets("Guides")
etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
View 9 Replies
View Related
May 25, 2014
I have a column with various values in, string and numeric. The strings I want to keep have "," in and letters one side and "space" on the other. All the cells I want cleared do not have ","
The rest of what I'm using works fine accept this line which forces an error.
[Code]....
View 5 Replies
View Related
Oct 15, 2008
I am in the process of reformatting an excel workbook to act as a review tool for different factors in a process. Part of my redesign includes the use of coding that creates different cell colors based upon the cell contents. The new workbooks will be used to handle existing data for this year. I have developed a process macro to open an existing workbook and copy and transfer the original data worksheet into the newly formatted workbook. The data gets transferred to the new worksheet and the resulting workbook is renamed and saved, Heres'' the rub... the newly saved workbook is missing all of the coding for the worksheets... apparently this is a MS bug.
Has anyone figured a workaround for this. One thought I had is to open both( new and old )workbooks and rather than move/copy , i would transfer the data using cell references.
View 5 Replies
View Related
Feb 18, 2009
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies
View Related
Apr 30, 2009
I am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank.
Cell 'B1' has a drop down to select specific items.
Cell 'C1' is the date of the order and is a locked cell.
Cell 'D1' is the date of completion and is a locked cell.
The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date.
If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
View 5 Replies
View Related
Apr 5, 2009
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
View 2 Replies
View Related
Sep 12, 2013
How to Lock/Unlock an Excel Cell Based on the Contents of Another Cell?
View 1 Replies
View Related
Oct 20, 2013
I'm trying to set up a dependent cell (B) based on what is in the independent cell (A)
If A is blank, B should be blank
If A has any value other than X, B should display a set string Y
If A contains X, B should contain a drop down list with a range of choices.
I've tried setting it up as a dependent validation cell and I've tried using OFFSET, but the best I can do is to get three different drop down lists to populate cell B. One with only string Y, one with only a blank, and one with the range of choices. The problem is in the first two cases above, I want the cell to fill automatically with either blank or string Y -- I don't want them to just be drop down options, with the cell displaying the last value that was input.
View 2 Replies
View Related
May 2, 2012
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
View 1 Replies
View Related
Mar 9, 2013
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
View 9 Replies
View Related
Mar 7, 2007
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59
then I60 clearContents, Select h59
Else select H59
Do until H3 is selected
Psuedocode
Select table (A2:I Xldown)
Sort Table by CAcode (H Col)
Set Range as H3:Xldown
Select Last cell with CAcode (Xldown) in H col
For every cell in Range (H3:Xldown)
Use If/thenIf Last cell = 2nd Last cell (H Col) then
Clear contents of I col (last row)
select 2nd Last cell (H Col)
Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Sub sort_And_delete_Sumif_amounts()
Dim r As Range
'Select range to sort
Range("A2:I98").Select
'Sort CAcode in H col ascendingly
Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
'select range for comparisomn of CAcode
Set r = Range("H3", Selection.End(xlDown))................
View 4 Replies
View Related
Mar 25, 2014
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
View 6 Replies
View Related
Apr 28, 2014
I have values in a number of cells. Next to them, if there was a value, regardless of what the value is, except blank or zero, i would like the cell to turn blue and if possible have a 1 in the cell.
I've used the conditional formatting, however, among the options, 'less than' is the closest to to getting the color right. The issue is that if the cell has nothing in it, it still colors the corresponding cell blue; because it is not less than the already blank cell. If it is blank, I don't want it to color the cell.
View 1 Replies
View Related
Dec 3, 2009
cell A1 is equals to B1 because the cell C1 contains the number 1.
Now if i change the value of the C1 to 2 how can i make the A1 shows the value of the B2 ?
Just like. [A1]=B(C1-content)
View 3 Replies
View Related
