I have a table with dates that have bonuses associated with them, some times the bonues change, so i have another table with the date the bonus is effective and then the range of bonuses based on the sales of the month....
View 12 RepliesI am currently constructing a spreadsheet with an engineering application. There are standard size shafts that bearings must fit on. Once the design is run, i obtain a number which is usually inbetween the two standard sizes. I need the spreadsheet to select the larger one. for example, 184 must be looked up from
160
180
200
220
I need it to select 200, however and the moment using lookup function i am getting 180.
I am trying to use lookup to search a table of data to return a value. The only problem is the data that I want to search is in [h]:mm:ss.0 format. And to make maters worse the search variable might not match exactly. I just can't get it to work. Basically I have a form that the user puts in their time to run a certain distance and I want it to return the corresponding VDOT value.
for example, if I can run 800m in 4mins 12 seconds, I would enter 04:12 into the form, and the function would look up 0:04:12 in column B and return the value of 66 from cell K38. I thought that it could be done by using lookup and the setting the relevant column by Offset but it doesn't and I'm at a loss. I've attched the data sheet so you can have a look.
I want to a macro or a function that can search for the value which corresponds to a cell and copy it to another cell. please refer to the attachment for more detail.
View 9 Replies View RelatedUsing Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
View 9 Replies View RelatedI want to be able to lookup if anywhere in a cell contains a word from a list of words, and then provides an output.
Column G:
VAT payment
HMRC payment
Pay VAT
I have a table on the side that shows:
Column Y Column Z
VATHMRC
HMRC HMRC
ie. If anything in column G matches one of the words in Column Y, then output the Column Z. I have use a Vlookup that works for the first two, as VAT is the first thing, but dont know how to make it work if the key word is in the middle of the cell.
I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.
For example, the data source contains different pets, their names, ages and their owners.
The other sheets are on a one-per-owner basis.
What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:
John Smith (in cell A1)
Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedI'm making my own gradebook (attached) and one of my sheets will list scores for each student in different assignments. I have one sheet which keeps track of all students and all assignments with other info. I would like to program cells in one sheet (the third in the attached file) to lookup a particular student's grade in a particular assignment. I figured trying a LOOKUP with an AND requirement might work but it keeps returning the message "could not find value".
My formula references the student's name and the assignment from the identifying cells so that it is easy to copy and paste. I wondered if it was this which resulted in the error, but doubt it.
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies View Relatedhere is an example....
(this is on a sheet called Summary)
----A--------B --------C------- D
1Names----At Bats----Hits----Batting Average
2Tom-------38--------31------.816
3Derek------19--------14------.737
4Joey-------40--------28------.700
5Chris-------40--------27------.675
6Chuck------37--------24------.649
Using the LARGE function, Excel has created a list based on batting averages(on a separate sheet called Line-up). It looks like this.....
---A----------B
1Names----Averages
2 -----------.737
3 -----------.700
4 -----------.675
5 -----------.816
6 -----------.649
The problem I am having is figuring a way for Excel to also bring the corresponding names (after using the LARGE function to create the line up list).
I have a very large spreadsheet of customer information(I call it the master spreadsheet). Each row contains only 3 things: Account number, product bought, Price
Later I receive the money from the customer for that product(the pay sheet) that contains the exact same thing in the same order: Account number, Product bought, Price paid.
What I'm trying to do is compare the two spreadsheets so that when i receive the pay sheet of cusomters who have paid with the amount it will deduct it from the master sheet.
So it should compare account numbers when it finds a match then it should subtract the amount paid (column C) from the master spreadheet price column(column C also).
sometimes customers don't pay the right price so it has to be a subtraction so I can see if it was over paied, underpaid etc.
Right now I'm still doing it manually combining the two documents sorting it by account number and checking for matches in column A (account number).
I need to place a lookup table in a work book and I'm not sure how to do it.Below is what I specifically need in my workbook.
c. The workbook will need a lookup table that will lookup the tuition, clothing
and entertainment figures depending on the selection of college, and will
ensure that only the colleges on the list are selectable. That is, the
worksheet will not allow the user to enter another college not in the list.
The lookup list must be on a worksheet by itself at the end of the workbook.
I have 3 Sheets named Paid, Rejected, and Reprocessed.
On the Paid and Rejected sheets I have 2 fields Customer # (Column A), and Amount (Column Q). (The customer # field has many duplicates but the amounts are never duplicates)
On the Reprocessed sheet I have all the rejected items (all fields) and also a field named Reprocessed. I need to use a formula that will check the Paid sheet for any items that have the same Customer # and Amount and return the amount
There are 8,216 rejected items and 45,047 paid items. Some items were originally rejected have been reprocessed and show under paid.
Any thoughts on which formula I should use?
Assuming 1st row is a header row
Sheet1, Column A
1230000_XL07 - WB OPS
1230001_XL08 - WB OPS
1230002_XL09 - WB OPS
Sheet 2, Column A
1230000
How do I lookup 1230000 and return 1230000_XL -07 WB OPS in B2
Is it possible to set up a lookup function with two lookup values? For example, say I have a list of items such as:
1 A 14
1 B 22
2 C 84
4 D 25
I'd like to have the lookup go to the above table and find the number 1 and the letter B and return 22. I can't seem to visualize how to make this work.
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies View RelatedI am trying to merge two different databases in the next week. The problem I am running into is the name from 1 database isn't always the same on the other database.
I want to merge Database 1 with Database 2 and create a relationship with them both by using the database 2 internal #. As you can see in my table database 1 has similar names to database 2 but they are not exact. I want to match these names and have the formula on match tell me what the database 2 internal # is. I have also uploaded a sample excel doc with a note in B2.
database1
Herb Chambers Ford of Braintree
Herb Chambers Honda of Seekonk
Dimmitt St. Petersburg
Database 2 matched internal #
Database 2
Herb Chambers Ford of Braintree (Dave Dinger Ford)
Herb Chambers Honda Of Seekonk (7-FI)
Dew Cadillac (Dimmitt of St. Petersburg)
Database 2 internal #
15360
15301
25413
I have one .xls file that contains an inventory list of all the products that I want.
Unfortunately this .xls file does not contain the prices for these items. I have another .xls file that contains SKU numbers and the prices related to those SKU numbers.
Is there a way to run every single SKU in the first file against the second file and, when a match is found, take the entry in the price column of the second file and place it in the first file so that my first .xls file contains all my products with prices?
I included sample data.
I think this requires SUMPRODUCT, but can't work it out.
The attached spreadsheet should explain clearly.
I have:
- Table 1 has ~1,600 records (name of game, meta score, user score)
- Table 2 has ~3,000 records (name of game, genre, publisher)
I want:
- Table X has ~1,600 records (name of game, meta score, user score, genre, publisher)
Basically, I want to take the genre and publish columns from Table 2, and add it to Table 1. However, I want to ignore the extra ~1,400 games that Table 2 has.
I'm nearly a complete noob when it comes to excel. Noob to the point where I don't even know what this thing is called, so I don't even know how to search for it properly! I know something can be done since there is a common column between the two (name of game).
Edit: Also, I think it'd be easier if I were able to attach my excel spreadsheets but I don't even know how to do that
i am trying to correspond 3 columns like:
Code:
________________________________________________________________________
points from / points to / note defined / points pupil got / his note
------------------------------------------------------------------------------------------------------------------------------
0 10 4 33 #
11 20 3 16 #
21 30 2 25 #
31 40 1 07 #
-------------------------------------------------------------------------------------------------------------------------------
Column 5 (his note) must be calculated looking at value on column 4 (points pupil got) and finding it on the intervals given by columns 1 and 2 (points from/to), and finally ascribing the value from column 3 (note defined).
I have a worksheet with data in named tables on several sheets. Each of these tables has a column called "filter" (this is not always the same column number between sheets). The values in this column are either 0 or 1, depending on if that particular row is relevant under the book's current selections.
I'm trying to figure out the code that will take a table and filter it to show only the rows which have a 1 under the "filter" column.
Need to sort data from one table to other tables in diferent worksheets so I can easy print report.
for example: (i got about 40 markets to add in table, this 5 is just for e.g.)
ABCDEFGHIJ1DATEMARKETEMPTY B.FULL B.E.B. - F.B.NETOPRICEM1M2M3215.6.2014market 11500145050145004260900062000011000315.6.2014market 21600160001600042672000670000-2000415.6.2014market
[Code].....
I have validation tables in a few cells. I've unlocked them and password protected the sheet so that they couldn't be changed other than what is in the list.
What's happening is that the list is there, but the cell is also allowing an entry that is not in the drop down.
How can I protect the cell to only allow the validation list?
I am after some code that will hide tables based on whether they contain certain values.
If we take the following example: ....
i entered an item (ie, Aircard5740, cost = $99.99). This specific item must be compared from the 1st table (type of phone) with 7 different columns where does it fall the same. Once found, another item will be entered, (ie, America's Choice 450, cost = $59.99) and again will be compared to the 2nd table (commission) with 7 different columns, (while still based from the 1st item), and from this 2nd table, there's the commission amount be taken. what formula can i type to get the commission from the 2nd table?
View 2 Replies View RelatedI have 2 tables in excel that i need to merge into one, Table 1 has 10 colmns and Table 2 has 7. Both tables have as column 1 a heading of Material, this is the column i need to compare as table 1 does not contain a material description field, but table 2 does, the bold headings are the key ones, but other column information is required. I have attached a sample ss to show what i am trying to do.
Table 1 Col Headings
Material
MTyp
MS
R
Clt
L/O
Created on
Created by