Lookup Data Across Multiple Tables
Jul 31, 2006I want to a macro or a function that can search for the value which corresponds to a cell and copy it to another cell. please refer to the attachment for more detail.
View 9 Replies
ADVERTISEMENT
Excel 2010 :: Creating Multiple Tables In VBA And Referring To Newly Created Tables?
Jul 1, 2013Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
Using Data Tables When There Are MULTIPLE Things That Can Change
Dec 22, 2013I have to use data tables to calculate Net Present Value (NPV) by altering specific variables.
My NPV is the result of a series of calculations to ultimately arrive at a cash flow figure and then apply the WACC (average cost of capital)
I understand how to use data tables But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV sensitivity
My sheet and calculations are all set up
I've done it manually by altering the figures on the Inputs and Data Sheet.
My NPV calculation is on the Workings and calculations sheet.
The data tables i have done manually are on the Inputs and Data sheet.
Multiple Data Tables On A Single Graph?
Dec 9, 2011I am trying to plot multiple tables on the same line chart in Excel 2007. I have a list of X and Y values for Table 1, Table 2, Table 3 etc.
However the size of the tables are not the same for each table. For example, Table 1 might have 200 X and Y values, Table 2 might have 175 X and Y values, Table 3 might have 105 X and Y values, etc.
So when I plot these data tables on one line chart the individual plots are off center. They should all be centered at 0.
Copy Data To Another Sheet With Multiple Tables
Jan 29, 2012I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
Insert Rows Between Data For Multiple Tables
Dec 12, 2013I need to insert a blank row between each row of data under my headers (not the immediate row) until I reach the end of the particular table. I then move down to the next header and repeat the process.
My starting data looks like this:
HEADER
DATAROW1
DATAROW2
DATAROW3
-emptyrow-
HEADER
DATAROW1
DATAROW2
DATAROW3
I need it to look like this:
HEADER
DATAROW1
-emptyrow-
DATAROW2
-emptyrow-
DATAROW3
-emptyrow-
[Code] .....
Creating Multiple Word Tables From Excel Data?
Sep 17, 2011I'm working on a national survey with valuable data from students. The plan is to turn around, 100 different reports to the departments with their respective students.
The issue that I have is creating multiple tables from multiple sheets in excel into a word table, any way of automating it.
What the tables look like in excel:
What I want them to look like in word, with a chart if possible:
I realize that I can just copy and paste easy table into word from excel and with a few clicks of a button, get what I want. But i'm looking for something to automate and simplify this process. There are about 300-400 variables that I need to crosstab with certain demographics.
If it matters any, I bought a software package (Q Market Research) but it doesn't make the tables look exactly how I want them to look. The data is from SPSS, those tables are flat out.
One Slicer For Multiple Pivot Tables With Different Data Source
May 2, 2013I have multiple pivot tables with different data source. I wish to have one slicer which control all the pivot tables. I would have one common colum for all the pivot tables which is the one i wish to control for instance the person in charge. Note that all my pivot tables are from different data source. how to do it?
View 1 Replies View RelatedUpdate Source Data For Multiple Pivot Tables With VBA
Dec 16, 2013The spreadsheet is comprised of 4 sales data sheets, one for each store. Each of these sales data sheets runs several pivot tables (One for dept sales, one for waste, one for sales on Selected UPCs etc) and I used to have 1 copy of each pivot table for each store (ie 24 pivot tables). Now I have found a way to have only 1 copy of each PivotTable which changes based on which store is selected using the following code:
Code:
Sheet13.PivotTables ("Top10LW").PivotTableWizard SourceType:=xlDatabase, SourceData:= _
.List(.Value)
This works great however I was repeating it for every pivot table I had in the spreadsheet, causing messy code and file corruptions.
Is there any code which I can use for updating all pivot tables, using as minimal code as possible, all in one hit?
Combine Data From Multiple Worksheets - Pivot Tables
Sep 20, 2009I am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
Multiple Pivot Tables - Single Table Of Source Data
Mar 9, 2014I am trying to generate several pivot tables from one data source table. I have successfully created my first pivot table (A date field, and a water storage facility level reading) and subsequently a graph from this. I have worked out that I need to group my dates as I am supplied a daily reading, but only need monthly average. All worked great.
Now i need to create more pivot tables and graphs. The next one I want is to create one grouped by years. But when I create this new pivot table and change the grouping of the date field to yearly, it also changes the grouping on my first pivot table, which is undoing my work.How to tell excel that these pivots are independent, and I don't want them changing in unison? See screen grab of my source data and where I am up to...
Microsoft Excel - 401027_0100.00_0221.00.csv_2014-03-10_11-41-35.jpg
Excel 2010 :: Import Data From Other Spreadsheets Into Multiple Tables?
Sep 13, 2013I'm trying to create some vba code that will go into other .xlsx documents, pull all cells with a value in the first 30 columns and then return them as a table. Basically each work crew has a .xlsx spreadsheet containing their schedule and I am trying to bring them all together into one nice little package. If I go to import from external sources then click XML data, navigate to the folder they are in and them click show all files and pick my spreadsheet it imports nicely. Then I go to the next blank cell in column "A" and repeat for the 4 crews. Now I can filter by each crew but all 4 are visible on a single page as a table. I recorded a macro that shows everything I did, but it is not dynamic (the .xlsx source files name changes based on the month) I'm running XP sp3 with Excel 2010
Here is a copy of what I have
Code:
With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array( _
"OLEDB;Provider=Microsoft.ACE.OLEDB.12.0;Password="""";User ID=Admin;Data Source=C:Documents and SettingsUSERNAMEDesktopSCHEDULE STUF" _
, _
"FAcrewCurrent.xlsx;Mode=Share Deny Write;Extended Properties=""HDR=YES;"";Jet OLEDB:System database="""";Jet OLEDB:Registry Path=""""" _
, _
";Jet OLEDB:Database Password="""";Jet OLEDB:Engine Type=37;Jet OLEDB:Database Locking Mode=0;Jet OLEDB:Global Partial Bulk Ops=2;J" _
, _
"et OLEDB:Global Bulk Transactions=1;Jet OLEDB:New Database Password="""";Jet OLEDB:Create System Database=False;Jet OLEDB:Encrypt " _
[code].....
Is there a better or simpler way to do this? The tables don't need to be forever linked to their previous spreadsheets so if copy/pasting is a better way than I am all for that as well.
Shortcut For Entering Massive Tables Pulling Data From Multiple Sheets
Jun 16, 2014I've already entered a variation of the formula below into 180 different columns. The only variation is where worksheet 322 is referenced. Each column references a different worksheet.
Formula:
I have at least four other tables to build of the same size, and they're each going to use this same formula with an additional IF formula housed around it. Ideally I would be able to copy the table, then run find/replace, where I could substitute = with =IF(new formula, and then run find/replace a second time and sub ))) with ))),more new formula). The problem of course is in between those steps lies a formula error preventing me from running the second step. The only alternative I can think of is to build the new formula, copy it into a word document, and run find/replace 180 times to tailor the formula for each column. That's what I did to build the first table.
Lookup In Sub-tables
Aug 7, 2008I have a table with dates that have bonuses associated with them, some times the bonues change, so i have another table with the date the bonus is effective and then the range of bonuses based on the sales of the month....
View 12 Replies View RelatedLookup From Tables
Jul 5, 2006I am currently constructing a spreadsheet with an engineering application. There are standard size shafts that bearings must fit on. Once the design is run, i obtain a number which is usually inbetween the two standard sizes. I need the spreadsheet to select the larger one. for example, 184 must be looked up from
160
180
200
220
I need it to select 200, however and the moment using lookup function i am getting 180.
Lookup Tables With Time Format
Jun 12, 2006I am trying to use lookup to search a table of data to return a value. The only problem is the data that I want to search is in [h]:mm:ss.0 format. And to make maters worse the search variable might not match exactly. I just can't get it to work. Basically I have a form that the user puts in their time to run a certain distance and I want it to return the corresponding VDOT value.
for example, if I can run 800m in 4mins 12 seconds, I would enter 04:12 into the form, and the function would look up 0:04:12 in column B and return the value of 66 from cell K38. I thought that it could be done by using lookup and the setting the relevant column by Offset but it doesn't and I'm at a loss. I've attched the data sheet so you can have a look.
Multiple Data In Single Cell Lookup In Another One Data
Nov 9, 2013see sample file, i need a formula to do like B column,
I WANT MAKE LIKE B COLUMN, COMPARE A COLUMN DATA IN C,D COLUMN AND ALL DATA SHOULD BE IN B COLUMN..
Change Pivot Source Data In Multiple Pivot Tables?
Jan 21, 2013I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
Lookup Data With Multiple Values
Nov 8, 2009I'm trying to return the next unique item in the list of partnumbers. The count column indicates that there are that many instances of that part number. I then populate down than many to VLOOKUP the value "count" number of times. The formula I am using to get the MFR code compares the pn to the one above it. If it matches, I want it to return the MFR offset by the one above it for that part number.
Source data: (will alwyas be sorted by part number, then by MFR)
Part NumberStock num NAME MFR
BDEGHS55555544333RIVET,BLIND53551
BDEGHS55555544333RIVET,BLIND92215
BDEGHS55555544333RIVET,BLIND98996
BDEGHS55555544333RIVET,BLINDC4293
Results:
CountPart NumberMFRStock numNAME
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
I want the first vlookup part of the formula to return the NEXT MFR code in the source data.
Lookup - Large Data Multiple Columns?
Nov 18, 2008In column A I have a list of product names..(e.g....ABCD, JKLM....)...this is the "master product list" -- 1000 rows of products.
In columns C:G, I have additional product names, each column represents products sold by state. (each column lists between 100-250 products).
I want to do a VLOOKUP and I wanted to know what products that are in
A1:A1000, that is NOT listed in C:G?
My experience with VLOOKUP is limited...but I do know that I can only look in 1 column at a time.
How can I write it to look at the ENTIRE range? I suppose I can copy all the all the products to 1 column...?
Using VLOOKUP To Retrieve Multiple Data For The Lookup Value
Jan 8, 2010I have to write some VLOOKUP formulas to pull several items from a report, the problem is there could be multiple items for each lookup value as the example below:
Company Data ABC Monday ABC Friday ABC Thursday DEF Friday GHI Monday
I need to reference every piece of data for every company but using the VLOOKUP formula, I am obviously only able to get the first instance of the lookup value (company ABC)
How to I write the formula to lookup the other data? The practical appliation I am using this for has anywhere from 300 to 400 lookup values.
Table Lookup Based On Multiple Data Validation Options?
Apr 23, 2013i am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
Lookup Data From Validation Drop Down And Return Multiple Corresponding Values
Jul 17, 2009I have a worksheet containing a list of states in column A and a list of companies in column B (along additional data in columns C-L). I want create a lookup formula on a separate worksheet where users can select the state from a dropdown menu and it will return the information from columns B-L for that state.
For example:
A B C D
Alabama ABC Company Active Expires December 2009
Alabama 123 Company Expired Expired April 2008
Alabama XYZ Company Active Expires August 2009
Alabama Larry Company Expired Expired May 2006
How can I do this without losing my mind? I've tried various Index, Small and Match formulas and none of them work.
Program Or Function To Lookup And Locate Typed In Data Across Multiple Workbooks
Jun 12, 2014have a formula or something along those lines that will look for the data you type in to the selected cell and will show you on how many workbooks it has been entered in. For example, I have workbook a, b, c, d, e, f. all have 12 sheets. On these 12 sheets there is a place to enter the serial number of an item. What I would like to be able to do is on a different workbook be able to type in a serial number and have it show which workbooks it has ever been typed in and its location on said workbooks. and if possible the results of the item which would be whether it was accepted or rejected( this bit is not totally must have. but the workbook and sheet location is a must.)
View 1 Replies View RelatedLookup Data From Multiple Worksheet Using Indirect Address And Match Function
Sep 28, 2011determining the correct formula to lookup various details from multiple worksheet:
Data as follows:
Sheet1: input
AB1MonthSales2AUG55003MAY4000
Sheet2: Data
AB1MonthSales2JAN20003FEB25004MAR30005APR35006MAY40007JUN45008JUL50009AUG550010SEP600011OCT650012NOV700013DEC7500
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
Lookup Function - Check Batches Of Data / Return Value Dependent Of Multiple Ifs
Apr 3, 2012Use look up to check batches of data a return a value dependent of multiple ifs?
I have this formula from here
=LOOKUP(COUNTIF(C4:C7,""&0),{0,1,2,3},{19.9,29.9,39.9,49.9})
What I am trying to achieve is using the above can it check
C4:C7 Grouped and named "first"
C8:C10 Grouped and named "second"
C11:C13 Grouped and named "third"
If one from each group is selected it returns 1 value, if 2 of each are selected it returns a second value and if 3 of each are selected it returns a third value?
I thought by grouping them it may give me the desired results but all it does is change if I select more than one from any of the groups.
Multiple Lookup Values Rows And Columns To Lookup Single Target Column On Right End?
Apr 7, 2014I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
Copying Multiple Tables Into One?
Oct 15, 2013Say I have 10 tables and want to copy them into one single table. Easy right? Just copy / paste.
The restraint with copy paste is, if I make an adjustment to one of the 10 tables, it will not be reflected in the master table. I would have to recopy the table every time I make a change.
I was wondering if this there was such a function that says: "Once done copying with X table, start copying Y table, and so forth."
Append Multiple Tables Into One Table
Nov 27, 2012I have a workbook that contains mutiple tables in multiple sheets that are all in the same columns in each sheet but contain various rows. Data may not be entered in every single row within each table. I'm trying to create a master list of all data from all of these tables on a single sheet so I can analyze the information in total. I don't want to show any blank rows on the master file where data is not entered in each table. I've tried using the consolidate function within Excel but am not looking to perform a function (i.e Sum, count). I've also tried a pivot table from multiple consolidation ranges (Alt + D + P) but do not like the limited functionality of the pivot table. I do not have much experience with VBA but am assuming this may need to be done using code.
Attached is a sample workbook with named ranges of each table. Example.xlsx
Sort Multiple Pivot Tables
Jul 15, 2014with this macro?
I have a lot of pivot tables on multiple sheets in one workbook.
I want to deselect all "(blank)" from rows, and sort both rows and columns in ascending order.
I recorded a macro but it only refers to specific pivot tables, I would like it to do the same sorting for all pivot tables in the workbook.
Sub PivotBlankSort()
'
' PivotBlankSort Macro
'
'
Windows("Alt Assessment Y10 13-14.xlsx").Activate
Sheets("L&C Prog Sum2").Select
With ActiveSheet.PivotTables("PivotTable10").PivotFields("English")
.PivotItems("(blank)").Visible = False
[Code]...
etc as I move to each separate pivot table.