Assuming 1st row is a header row
Sheet1, Column A
1230000_XL07 - WB OPS
1230001_XL08 - WB OPS
1230002_XL09 - WB OPS
Sheet 2, Column A
1230000
How do I lookup 1230000 and return 1230000_XL -07 WB OPS in B2
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
I have a question regarding searching in cells for a value, and returning corresponding data. This is what my workbook looks like:
Sheet1, cell A1 contains value "D600"
Sheet1, cell A2 contains value "V-1234"
Sheet1, cell A3 contains value "DB23"
Sheet1, cell B1 empty
Sheet1, cell B2 empty
Sheet1, cell B3 empty
..........................
1. search each cell value form Sheet1 column A, in Sheet2 column B
2. when a match is found, return the corresponding value of column A from Sheet2....
I am not sure if a vlookup can do the following.
I have a spreadsheet in excel with lots of rows. In column A I have some descriptions such as:
British Pound
Danish Krone
Japanese Yen
I have created another spreadsheet 2 columns that would have something like:
column A/columnB
British/Yes
Danish/No
Japananese/Yes
This 2nd spreadsheet can grow and have more lines.
In column Z of the 1st spreadsheet, I want a formula to look at the second spreadsheet and if any word in the column A of the 1st spreadsheet matches the word in column A of the second spreadsheet, I want it to the value in column B of the second spreadsheet.
I have a USB scanner connected to a PC. Data is entered into Excel when the part number barcode on a box is scanned. I have two worksheets that I will be scanning part numbers into, one is Group A and the other is Group B. On Group A's sheet there is a list of Group B part numbers that will be used for the lookup procedure when the barcode is scanned. The same is true for Group B's sheet. The groups should never be mixed, so if part number "B005" is scanned into Group A's sheet it should cause an error message to pop up. I've attached a workbook as an example. Is it possible to do this with VBA?
Barcode Scan Lookup.xlsx
I'm trying to create a lookup process for my address part of my invoice, I want it so when I enter the first address it automatically looks up and enters the rest of the information (Title, Name etc.) I've been trying to do this with vlookup and I can't seem to get it to work. I'm just getting #Ref! returned.
My address 'database' (list of addresses etc) are on a seperate sheet to the Invoice.
We have the following formula in our timesheets. Basically when we enter a Job number in one cell in say Tab1, it will return the matching project name in a different cell that we have next to the project number. The job number match is done in the tab named "ProjectSchedule", where all the details of the project are listed. We need to extend the match range to include another tab named "CustomSchedule", but I can't figure out how to make the first formula search jobs from both tabs.
Current working formula:
=IF(C7="","",INDEX(ProjectSchedule!$C$3:$C$202,MATCH(C7 & "*",ProjectSchedule!$B$3:$B$202,0)))
What I'm trying to accomplish, but it not working is something like this:
=IF(C7="","",INDEX(ProjectSchedule!$C$3:$C$202&CustomSchedule!$C$3:$C$202,MATCH(C7 & "*",ProjectSchedule!$B$3:$B$202&CustomSchedule!$B$3:$B$202,0)))
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
untitled 1.JPG
i want result "z" in b1 in all three condition of attachment
A b c d
100 100 x
100 y
100 z
I want to lookup 100 in colum b with a result of z instead of x in criteria c:d
I am trying to write a function that will look up values in an array, and then return a value from a separate array. where:
Column A has a name and dates:..Column B has a number associated with the date (0 or 1)
"John" ..............................................0
6/1 ..............................................0
6/2 ..............................................1
6/3... ..............................................0
6/30 ..............................................1
I am trying to make a summary table that shows the dates associated with each time "1" occurs
So it will look like:
column C: ...... Column D: ...... Column E:......Column F:
John.................6/2...............6/30............... N/A
Bill ............... 6/1...............6/2............... 6/30
Fred ...............N/A ...............N/A...............N/A
and so on:
I've tried excel formulas, but can't get the right date returned.
I have two columns of data, one containing Groups, another containing Items. Like this:
Group | Item
A | Apple
A | Orange
B | Pear
B | Banana
C | Tire
D | Coffee
etc.
On another sheet, I have each of the groups listed as column headings. I want to resort the data and display it in columns instead of in a single list.
I can write a VLOOKUP to search for "B" for example, and return "Pear", but I want to return all matches for "B" not just the first one.
The formula you see below works great. It will lookup to the closest value that matches the criteria.
=LOOKUP(2*F2-0.000000000001,C1:C4+C2:C5,D2:D5)
Here is the problem when I try to expand the range I get a zero.
=LOOKUP(2*F2-0.000000000001,C1:C19+C2:C20,D2:D20)
Is there anyway we could overcome this?
I know I could use a formula array for this, but I would like to know if this could be done in a non-array formula ....
I'm using an Array formula to lookup a particular value then return a related column value.
What I would like to do is Sum a related range of cells.
The formula I have used to look up the single cell is
{=INDEX('[PL.xls]Parts List'!A4:S205,MATCH(A63,'[PL.xls]Parts List'!A4:A205,0),7)}
So in this case the related value in column 7 is returned.
I would like to sum the related values in say columns 5 to 11
I have attached a worksheet which I need to show the last update and last date customer contacted, The formula :
=LOOKUP(2,1/($F2=Data!$D$1:$D$10000)/(Data!$B$1:$B$10000=MAX(IF(($F3=Data!$D$1:$D$10000)*(Data!$M$1:$M$10000=COUNTIF($F$2:$F3,$F3)),Data!$B$1:$B$10000))),Data!B$1:B$10000)
is used to output the last contact and the formula contained within column Av, Both of which contain #N/A
I have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
View 9 Replies View RelatedI have a spreadsheet that I would look up two criteria in the table array, which first is down the column and next cross the row.
It would be easier to explain the scenarios by referring to the attached file.
I have a grid like follows (how to format):
2013-08-16-5.00 0 0
2013-08-16-2.0-19,902 -20,734 -21,429
2013-08-16-1.011,431 11,907 12,297
2013-08-160.0-0 0 -11
2013-08-161.0111 153 140
2013-08-162.031 61 60
[Code]...
Basically I want to return an array (to pass to another function) containing all data that matches my search. E.g. I want to retrieve an array of the data that matches 2013-09-20. Is the only way to do this a VBA func?
I need a look-up function that can return a value from an array that can be 3 to 7 rows in height. I want the function to always look at the last row in the array.
This is how it looks:
Column A Column B
blank row
1000
A
B
C
SUM 15
blank row
In this case I want the function to return 15 if I search for 1000. The problem is that there are not always a fixed number of rows beneath the searched value.
I have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
Here's how the sheet is set up- row 6 is a header row with four repeating column heads- year, value1, value2, value3. So year is in col A, E, I, M, Q, etc. up to FM. Value3, the one that I want totaled is in col D, H, L, P, etc up to FP. Each year column begins with a different year, (with some repeats) but each is 141 rows long, so that the first study begins in 1994 and ends in 2134, the second is from 1985-2125, the third is from 1991-2131, etc. I want excel to find all the value3's from 2007 and total them, all the value3's from 2008 and total those, up through 2145. The data range is A7:FP147. I tried adjusting some of the suggestions, but no luck. I was thinking I'd have column FQ with all the years 2007 on, and FR by the total of all the value3's from that year.
I am looking to write a macro that can look at a value (i.e. "X") in a cell and compare it to the elements in a 2D array (where one dimension corresponds to the start value and the other to the end value) that is found on another worksheet. If "X" falls between the starting and ending numbers then I would like the macro to return a string (say "Test1") to a cell on the same row and a couple of columns to the left. The string values are listed to the left of the start and end values on the first worksheet and are elements to a 1D array. I am trying to make this " loop" through all the cells that contain run numbers (I have highlighted the columns in yellow on the attached workbook). There are multiple (i.e. +12) worksheets in this project but I have only included two in the sample I am providing because of file size.
View 4 Replies View RelatedI have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
View 9 Replies View RelatedI'm trying to define a range of values in two cells M1:M2; lookup that range of values in a three column array (K12:M600) and sum the values in column M12:M600 if they are positive values. I've been trying this formula:
=SUMIF(M12:M600,">0",(VLOOKUP(M1:M2,K12:M600,3,TRUE)))
but cannot seem to get it to work.
I have a table of data with years in row 1, week # in column C. The data array is from C2:O34.
I want to find the max value in each year column, then look up that result and return which week that value occured.
Is there a vlookup that allows you to specify which column of the array has the lookup value and which has the lookup result?
In the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
View 3 Replies View RelatedI've a question. For instance
apple,lemon,strawberry
fruit
green,blue,white,black,grey
color
...
...
...
...
I've a list like above. How can we use lookup formulas from comma-separated cells?
white> color
lemon> fruit
Am trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.
Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)
I need the array portion of a lookup formula to change based on a cell value.
On a worksheet(named "groupings")that groups students according to ability level, I have data validation lists where teachers select the criteria for the group. In cell I5 they choose the period, and in cell L5 they select which assessment to look at.
Cell B8 will either say high low or medium. Then in cell C8 I have this formula: Lookup_Occurence($B$8, ??????, 1,1,2)
Again the array will depend on what is entered in cell I5 and cell L5.
I have attached one of the worksheets the lookup_occurence will be referencing. In this exit card worksheet if cell B10 (the name of the assessment) matches what the teacher chose in cell L5 on the groupings worksheet, then the array formula will be 'Exit Card'!Card1. If cell G10 matches what the teacher chose in cell L5, then the array would be 'Exit Card'!Card2. Where A9:C339 is named Card1 and cell F9:H339 is card2 etc.....
However, it gets even more complicated then that because within Card1 there are 8 periods, and if a teacher chose period 1 in cell I8 on the groupings sheet, then I only need the array to look at the period one data in the card1 array.
Essentially what I am trying to accomplish is create a page where teachers can group students by ability level according to any assessment they choose. On the exit card page the formulas currently equaling # Div/0 will say either high, med, or low depending on how a student performs on that assessment.
