However it will only add data to the active sheet when i am asking it to loop through the workbook missing out specified sheets. Would anyone be able to look over the code to see where the error is as to why it will not loop through the remaining sheets in the work book.
View 5 RepliesSETUP: I have a shared workbook that is accessed by many people. It is designed to control the flow of work during the monthly close process. These processes are controlled by macros. There are 40 sheets in this workbook.
PROBLEM: On of my location's workbooks frequently loses half of it's sheets in the workbook. Counted in the neighborhood of 14 to 19 sheets go missing.
EFFORTS: I have attempted to Delete, Cut, Move, etc... these sheets with no success.
Only when I put the file in an exclusive state can I manipulate the sheets.
I am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
I have a small macro that searches the sheets in a workbook and sends the info (if qualifies) to a new workbook before saving that workbook using a name date time format for records.
I woud like this macro to be able to repeat action in 8 more selected workbooks in a folder.
Question - can I name the workbooks I want to search - and - can I search all 9 workbooks before the data sheet saves and names itself, limiting access.
Is it possible that a VBA code could loop through some sheets in a workbook and save each one as an individual CSV file. The CSV filename would be the same as the sheet name.
View 2 Replies View RelatedI am trying to loop a procedure that changes a cell value on 2 sheets in a workbook. I recorded a macro on one workbook and it worked fine. I then tried to modify the macro to loop this on more workbooks that have identical worksheet names. The macro is in a workbook named LIST, which column A has a list of all the workbook names. Currently there are 55 workbooks, but in the future I am sure there will be a few more. Here is a copy of the macro:
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 5/28/2008 by MT
'
Dim STATEstr As String
Dim a As Long
a = Range("C1")
For STATEstr = A1 To A55
Workbooks.Open Filename:="C:ALLSTATES" & STATEstr & ".XLS"
Sheets("3 ANL").Select
Range("A1").Select
ActiveCell.FormulaR1C1 = a
Sheets("3 ANLV").Select
Range("A1").Select
ActiveCell.FormulaR1C1 = a
ActiveWorkbook.Save
ActiveWindow.Close
Next STATEstr
End Sub
The first error I got was a TYPE MISMATCH on 'For STATEstr = A1 To A55'.
There may be more things wrong with this looping. The only experience I have with macros is recording them and then modifying and combining them.
I have set up an formula to link data on one excel sheet to another
Ex.
='E:New Folder[MWellComposite_2.xls]Sheet6'!$C$11
This sheet (MWellComposite_2) is automatically generated from a data retrival system
When Sheet6 is not generated it is automatically named Sheet1.
='E:New Folder[MWellComposite_2.xls]Sheet1'!$C$11
Why does it loop back to Sheet1 & Can I stop it
How i could this one in formula or macro, first my 1st sheet is just as show below (maybe use for a template)
1st sheet (full list)
fruits
china
orange
0
0
0
0
fruits
china
apple
[Code]...
then 2nd sheet, report i get which something like this :
fruits
china
orange
1
25
1
500
fruits
jiapan
kiwi
2
[Code]...
then i want result like this on 3rd sheet :
fruits
china
orange
1
25
1
599
[Code]....
so basically i want add missing row on sheet 2 from sheet 1
I am using office 2010.
I have problem about adding workbook event.
when I go to ThisWorkbook and click the left side dropdown at the top of the code window, I can't see the word "Workbook" appear. What I can see is only (General) and there is no other choices.
Other worksheet and application event work fine.
attached is a screen shot when i try to add a workbook event.
In Excel I've always had a Personal file come up when Excel was opened. It may have accidently got closed??? The personal file does not open with Excel and I am unable to find it. It is required to run macros correct?
View 13 Replies View RelatedI have been searching the forum for weeks now for an solution to my need, but was unsuccessful. I have two Workbooks. One is for tracking new enrollments in the school for whom I work named WVT.xls and the other is for tracking the school materials assigned to each student named 2007.xls (for inventory accounting). I need to streamline adding new enrollments names to both Workbooks by adding to only one manually and then using VBA code to update the names in the other workbook. The sequence would be to type the names into WVT.XLS and run a macro in 2007. XLS to automatically update the names. Below is the locations of the same named columns in each workbook.
First Name Last Name
WVT.XLS Column B Column A
2007.XLS Column B Column C
In 2007.XLS, there is a sheet for each school location that is represented by a unique school code. In WVT.XLS, there is one sheet for all enrollments from the start of distributing materials. Each row is a student. There is a column that contains the unique school code to identify in which school the student has enrolled.
I have an Excel workbook with around 100 worksheets. All of them have similar columns, but the values are stored as text. The length of columns and missingness is different in different worksheets. I will be grateful if any of you could suggest a VBA that could convert the numbers stored as text back to numbers. I have been looking for an answer for a while, but cant seem to find one that automatically looks at every worksheet and converts text into number.
View 1 Replies View RelatedI would like to have a macro designed. I have 2 workbooks, one having latest information and the other having the information in database already. both workbooks have 26 columns each. I would like to check if a value that exists in Column A of the "latest-information" workbook also exists in the "already-in-database" workbook. If so, I would like to update all 26 columns of that row in the "already-in-database" workbook with information from the "latest-information" workbook. If the value does not exist, I would like to add all 26 fields in that row into a new sheet on the "already-in-database" workbook.
View 3 Replies View Relatednew data goes into the report, the pivot table looks at a dynamic range and confirmed that the range doesn't select any empty cells.
Just wrote a macro to fill missing cells with a data on workbook open.
all the data is date form, yet still when i refresh the pivot table i look my montly grouping, when i try to group again it says "unable to group"
I have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
I have one excel 2010 workbook with 5 work sheets, each work sheet contains a list with first/last name(one column) and the company name, some have a 3rd column with their email address in each sheet represents each year starting at 2008 thru to 2013 i have to find out if the people that attended an event in 2008 also attended it in 2009/10/11/12/13 and if they didnt, put their name and company name onto a blank worksheet within the same workbook without using a macro, how can i do this?
View 2 Replies View RelatedHow do I tell a loop command to stop after a certain number of sheets? The code below works for what I want to do but it saves all the sheets in my workbook bar the first one. I just want to save sheets 2, 3 & 4
Code:
Option Explicit
Sub mysaver()
Application.Calculation = xlManual
Dim counter As Integer
counter = 2
' counter is for the number of sheets in the workbook
Do While counter
I think I need a For Each Loop, but I'm not sure. I want to collapse all grouping to the highest level for certain sheets in a book.
Sheets("sheet1").Select
ActiveSheet.Outline.ShowLevels RowLevels:=1
Sheets("sheet2").Select
ActiveSheet.Outline.ShowLevels RowLevels:=1
Sheets("sheet3").Select
ActiveSheet.Outline.ShowLevels RowLevels:=1
How can I specify which sheets to do this for and then loop thru all sheets to do it?
I want to perform an action on all but one of my worksheets. I've heard the array function can be used for this but I'm unfamiliar with its use.
View 9 Replies View Relatedwhy this code does not work on all the sheets in the active workbook? Actually it just work on the current active worksheet.
Dim ws As Worksheet
ThisWorkbook.Activate
For Each ws In AtiveWorkbook
ws.Activate
code here
Next ws
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
the code for looping through ALL the sheets in a workbook, copying ALL the cells and pasting the values?
View 5 Replies View RelatedI have this very simple code below that I use to delete a row if its marked as 'false' in column M. This works quite well, but I want to expand it. I use this in a workbook that can have name different sheet names in a month, and I want it to automatically go through all the sheets and do this...except for 2 sheets named addressess and sheet1. Is there something I can add to this macro that will loop through all the other sheet names (regardless of name) and execute this?
Sub DelRow()
With ActiveSheet
.AutoFilterMode = False
With Range("m1", Range("m" & Rows.Count).End(xlUp))
.AutoFilter 1, "false"
On Error Resume Next
.Offset(1).SpecialCells(12).EntireRow.Delete
End With
.AutoFilterMode = False
End With
End Sub
I have a list of worksheets that I want to select from a list.
Region 1
Region 2
Region 3
etc....
These sheets are in a workbook that contains other non Region sheets.
How do I select all of them without hardcoding the sheet names?
I am trying get a set of code to run through the sheets in the workbook... All sheets EXCEPT 1 named "Summary".
How can I code the proper statement? This is my current
Private Sub cmdAddDistribution_Click()
Dim ws As Worksheet
Dim lCount As Long
Dim rFoundCell As Range
'check for selected cash flow
If Trim(Me.cboxCashFlow.Value) = "" Then
Me.cboxCashFlow.SetFocus
MsgBox "Please select a Cash Flow."
Exit Sub
End If...............
I've put the following code together;
Sub RemoveStars()
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Sheets("Sheet1").Select
Cells.Replace What:=" *** ", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False
Sheets("Sheet2").Select
Cells.Replace What:=" *** ", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False
Sheets("Summary").Select
Application.ScreenUpdating = True
Application.DisplayAlerts = True
End Sub
There are more sheets that this is run on, but I am sure you get the idea. I guess that this can be done using a loop, I would prefer to code the sheet names in, there are 5 in total.
I am trying to loop all columns in each of a number of sheets using current region.
It selects the current region OK but the column counter only shows 1 as the number of columns in any sheet.
The Cells(6,1) likely has something to do with it but I do not know any other way to point to the current region I need. I do not know in advance how many rows or columns I am starting with but each has the required Row 6.
For x = 1 To Sheets.Count
Sheets(x).Activate
Cells(6, 1).CurrentRegion.Select
Selection.CurrentRegion.Name = "Mydata"
'Loop all columns in sheet
For y = 1 To Range("MyData").End(xlToRight).Column
Cells(5, y).Select
Next y
Next x
I have a WorkBook with many Sheets "imagine Sheets.count=50"
9 of the CodeNames for this Workbook's sheets are: sht01. sht02, sht03, sht04, sht05, sht06...
If I want to change the name "not the CodeName" of say "sht01" I can use:
sht01.name="New Name"
but is there a way of doing this whitin a For Next this way:
For X = 1 To 9
Sheets("sht" & X.CodeName) = X ' the Name X is just for this eg
Next X
Trying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
I want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.
How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
with:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
These two formulas together would be:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")
I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")
This doesn't work either
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.