Looping Through Each File In Directory?
Mar 5, 2013How can i loop through each excel file in a directory.
View 1 RepliesHow can i loop through each excel file in a directory.
View 1 RepliesI have a directory with over 100 .txt files. I want to open each file, parse the data and copy the data into a new file which has numerous formulas and functions to perform on the data. I have the code for doing all the work, but I have to open each file individually and run the macro. I would like to loop through all the files in the directory to perform the same fuctions. I need the looping code for getting the files from the directory.
View 4 Replies View RelatedI am trying to prompt the user for the directory to be saved in and file name to be saved as; then save the workbook in the input directory with the inputted file name.
View 3 Replies View RelatedI wrote the following routine to loop files in folder. I have 4 .xls files in my test folder. This code is only grabbing 1 then exiting. I have used the Dir() loop before with no problems.
Code:
Private Sub GetDataMultipleFiles(ByVal importExt As String, ByVal xFileNum As Integer, ByVal importLoc As String)
Dim Sep As String, myFile As String
Sep = Application.PathSeparator
myFile = Dir(importLoc & Sep & "*" & importExt & "*")
Do While Len(myFile) > 0
[Code] ..........
In my very crude code below....I would like to speed up the coding so by extracting data from some 800 CLOSED workbooks and pasting the data from Non-contiquous cells in an active workbook on one sheet. Can't seem to ge the = Excelmacro4 closed workbooks method to work so I went with opening each workbook, extracting data and then closing each workbook...way too slow.
Question 2. As the loop progresses...I would like to concatenate the text strings copied from the Source books Ranges G4 and G5 as they are pasted into a single cell in the destination workbook. Can't figure out how to either concatenate or xlpaste special in the coding.
Question 3. IF a user has a one of the workbooks OPEN, how do I copy that data as well other than On Error Resume Next?
Dim wbOpen As Workbook
Dim wbDest As Workbook
Dim WS As Worksheet
Dim i As Long
Sub GetdaData()
Application.ScreenUpdating = False
Application.EnableEvents = False
I purchased the book VBA and Macros for excel and it has gotten me pretty far in this code, but I am having difficulty with one code though. I want the Macro to run through a specified directory, and copy the contents of the specified cells (9th row to last row) from each file and paste them in the next available space on my master. Then repeat this process for each file in the file directory. So far, it is successfully going through each file, but it isn't pasting it to my master sheet.
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Dim ws As Worksheet
Dim NextRow As Long
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
.LookIn = "K:ESAR GroupForecasting"
.FileType = msoFileTypeExcelWorkbooks
.Filename = "*.xls".........................
Is it possible w/ some vba code to copy the names of files, either from a search or a specific directory to an Excel Worksheet?
View 9 Replies View RelatedBy Code I am trying to SaveAs the present Workbook : Only in the same directory as the present Workbook- but with a different file name. The new file name would be :"the Filename of the Active Workbook" + " ("D9") of the Sheet("ADMIN")". This macro will only be run from the Sheet("Admin").
View 4 Replies View RelatedI have a spreadsheet, where the corresponding invoice number is located in column I.
All the necessary invoices have been scanned in as pdf's in folder Y:FinanceSalesInvoices.
The question is, can a code be written to say in column Z, that a hyperlink be created to that particular invoice. For example, in cell I2, it would have Invoice1, then in cell Z2, it would have a hyperlink of Y:FinanceSalesInvoicesInvoice1.pdf.
Can i open a workbook without knowing the directory? more importantly without showing the directory?
I want open the file "EstimatingSheet" where ever it is.
I have a workbook that is produced by some other application that names the file "FAMMToday_#.xls"
Where # increases from 1 to 2 to 3 to 4 to 5 and so forth until all the analyst are done with adjustments. so the directory can look like but doesnt always go to five and nor is it limited to five.
"FAMMToday_1.xls"
"FAMMToday_2.xls"
"FAMMToday_3.xls"
"FAMMToday_4.xls"
"FAMMToday_5.xls"
Is there a way to pull the latest file?
If I know the name of the file how can I get that file’s directory (Address) with macro or function?
View 9 Replies View RelatedBasically what I want to do is to create a button which when pressed opens a file picker (I think its called this way) and the user should find and select a pdf file. And when he does that he clicks "OK" and this file is copied to specified folder.
View 7 Replies View RelatedThe script below writes a ".csv" file to the same directory that contains the workbook the macro, "foo" is run from. I'd like to change the script to always write the file to a separate directory which is: "c:etcupload".
[Code] .....
I have an excel spreadsheet that has a list of pathways to different folders (ex. Q:TechnicalY001) in each row. I want a macro that will search each of the folders I list in a range of cells and return the most recent file by the Date in the filename:
Example: Cell A1 contains folder path Q:TechnicalY001
Cell A2 contains folder path Q:TechnicalY002
The macro would return the most recent file in Y001 and dump the filename into cell B1. Then it would return the most recent file in Y002 and dump the filename into B2.
After I have all of the most recent filenames, I want to be able to search each of those files for data in certain cells and then dump that data into the spreadsheet. The cells are always going to be the same in each file.
I've got this code that will copy data into my worksheet from the most recent .IRP file generated on my C:/ drive. Along with copying the data to my worksheet, I'd like to have a copy of the IRP file copied to a folder on my L:/Drive.
In the code section I've commented out the code that allows the data from the most recent file to be copied to my worksheet. I found code that supposedly will copy a file to a new directory. I want to combine this into my code to allow both to happen. Here's my attempt.
The code bellow allows me to save a copy of the invoice by way of doPDF using invoice number as the name of the pdf to be saved.
Code:
Else
Application.ActivePrinter = "doPDF v7 on DOP7:" 'Selects doPDF to genarate PDF file of invoice.
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:= "E:LusaGenerated InvoicesINV" & Range("L17").Text & ".pdf", _
[Code]...
As there is the need to, should a quotation or an invoice be wrong, to change it. In other words I have code to cancel the invoice as bellow.
Code:
Dim sResponse As String
Dim rFound As Range
sResponse = InputBox("Enter record you want to change." & vbNewLine _& "ATTENTION!
This will change the current record number and will erase record data from saved records sheet.")
If sResponse = "" Then --cancelled or OK with no entry: do nothing or add message
Else
Set rFound = Sheet1.Columns("L").Find(What:=sResponse, LookIn:=xlValues,
[Code]...
The code above simply removes a line on sheet1 to which yet another macro retrieved some info from an invoice such as date, invoice, customer and total.
Now I just realized that when I change an invoice, I will be again when finished, creating another pdf file that already exists.
How can I have the second macro here changed so that it will go to ""E:LusaGenerated InvoicesINV" & Range("L17").Text & ".pdf", _" and delete this pdf file?
I have a 2 columns.
A: Current location Ex(C:UsersDesktoplabelsA02FAA.jpg)
B: Future location Ex(C:UsersDesktopoxes98300SA02FAA.jpg)
I want to move jpgs from location A to B
is there a way to execute this with a macro?
The file that this code is located in is often sent to others to use which means I have to modify the directory and path each time I send this file in order for the VB code to work.
Workbooks.OpenText Filename:= _
"C:My documents-2Monthend Supplemental ReportsDeficiency ReportscurrentC37.txt"
Is there a way to have the file opened from any active directory it happens to reside in?
In the following code, What do I need to add to allow the selected file to open when I click on it? I have a drop down menu that lists my .xls files.....as of now when I choose a file nothing opens.
Sub Auto_Close()
On Error Resume Next
Application. CommandBars("Patient List").Delete
On Error Goto 0
End Sub
'================================
Sub Auto_Open()
Dim cb As CommandBar
Dim ctrl As CommandBarControl
On Error Resume Next
Application.CommandBars("Patient List").Delete
On Error Goto 0
Is it possible to search a directory looking for a particular file, then if found, copy the directory and all its contents to another location?
it should be noted that not all of the files will be *.xls.
In my search I found several example similar to what I need, but nothing I could adapt to filt my needs, (at least not wim my limited skills).
Here what I need to do:
I have multilple Excel files in a directory. (M:/Archived PO Responses/Domestic). On a daily basis, these files are processed via VBA, and deleted after processing. What I need to do is, prior to processing and deleting these files, create an ongoing log of the filenames in that directory.
Example:
The macro would open an Excel file named "Processed Orders.xls", which is stored on the network drive "M:". It would then append all of the filenames in the directory mentioned above to a sheet named "Processed Orders" in that workbook, below any filenames that already exist.
I have some code that copies a worksheet and saves into a new workbook and saves into a specified folder and renames the new workbook.
It is all working fine however it is saving to my desktop and not the specified directory. I know there is a lot similar out there and i have exhausted my google skills trying to find the similar format to the one i am after.
Code:
Sub MonthlyReset()
Dim sourceSheet As String
Dim clearR As Range
Dim newFile As String
[Code]....
I need a macro to loop through a dir and the sub directories to find xlsm files, when it finds one open, go to the sheet named data, look at c1 and if the value is between 12.1 and 13.4 then i need it to write the file path, filename to a1 in my excell sheet and then write the value from c1 in the original file to A2 of line in my excel sheet.
I have hobbled pieces of code together without any good results.
I have recorded the below code that functions fine from my computer. My issue is that I need to export/import this macro to other workstations who may have the save to location mapped to a different drive letter. Is there a way to replace the drive letter with the URL (SharePoint)?
ChDir "E:3. CRQsRemedy Dumps"
ActiveWorkbook.SaveAs Filename:="E:3. CRQsRemedy DumpsToday_CRQ_8Dump.xls" _
, FileFormat:=xlExcel8, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
Save To Directory: \server_1Dir_1Dir_2FolderToday_CRQ_8Dump.xls
Permissions are in place.
I need to copy the names and date modified from all pdf files in a open directory. The directory name will change month to month. I will copy the names into an excel workbook that will be opened as well called Shipped starting in sheet1 cell P2
Using VBA, can anyone please advise if it is possible to change the name of a large number of files in a directory. I want to get each file name as a string, truncate the first few characters, then change the name to the new filename, all without opening any of the files whose names are to be changed.
View 9 Replies View Related1. In centain directory I have xls files where name of each file starts from "HR" string, eg. "HG_Control Mike.xls", ora "HR_Control Mark.xls".
2. I have a master xls file where I want to start a macro that will open each of xls "HR" files and copy selected rows to this master xls workbook (need to write this one too).
Problem is that opening of every "HR" files suposed to be protected by password. Users will be adding new xls "HR" files to the directory so I will not be able to change macro everytime new xls is added. So, I need to make a macro that will generate password base on xls "HR" file name and then I will use this password to protect this files and open them by another macro.
I have some VBA which currently creates a directory when it produces an error. the code is as follows
Function create_year()
On Error Goto makenew
ChDir "I:Reports" & Year( Date)
Goto skipmakenew
makenew:
MkDir "I:Reports" & Year(Date)
skipmakenew:
End Function
What I would like to do is have an IF statement which checks if the directory exists.
I need some VBA code to cycle through each and every folder and file in a given root directory and write the file name string to a cell. (does not need to look at the content of sub-folders only the names of all objects sitting directly under the given root.)
View 4 Replies View Related