I need some VBA code to cycle through each and every folder and file in a given root directory and write the file name string to a cell. (does not need to look at the content of sub-folders only the names of all objects sitting directly under the given root.)
View 4 Replies
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
In my search I found several example similar to what I need, but nothing I could adapt to filt my needs, (at least not wim my limited skills).
Here what I need to do:
I have multilple Excel files in a directory. (M:/Archived PO Responses/Domestic). On a daily basis, these files are processed via VBA, and deleted after processing. What I need to do is, prior to processing and deleting these files, create an ongoing log of the filenames in that directory.
Example:
The macro would open an Excel file named "Processed Orders.xls", which is stored on the network drive "M:". It would then append all of the filenames in the directory mentioned above to a sheet named "Processed Orders" in that workbook, below any filenames that already exist.
I need help for reading data from text files and saving it under different columns in the excel file using vba macro.
For example: I have many text files in the following format ....
I have a directory where our customer service people deposit forms each day. The form is always the same, with a number of columns that need to be copied into a master list. From there they are analyzed, sorted, etc, then exported, so the number of rows in that list varies from day to day as well. Is there some way to have VBA import each file sequentially from a directory if I do not have the exact file names?
I am using this import code from a macro to start with:
Sub importdata()
' importdata Macro
Range("A2").Select
With ActiveSheet.QueryTables.Add(Connection:=Array(Array( _
"ODBC;DSN=Excel Files;DBQ=C:Documents and SettingsMy DocumentsTender Document(1).xls;DefaultDir=C:Documents a" _
[Code]....
Here is a project I can’t seem to do on my own if you can point me in the right direction I would be grateful! here is the best suedo code to describe the needs of the script:
In the open workbook named MASTER, on Worksheet named -MASTER- ( Let’s refer to this all as just MASTER)
(In production, the name of this workbook will be an account #_ date, and the worksheet will be a date)
For each numeric value in row 6 (we’ll call these values AD###) of MASTER
'*****Part one of routine*****
Search directory "H:AccountingAdvertising Accounts" for workbook named AD### AX.xls
(Note the AX suffix of the file name)
If match is found open workbook and proceed to Part two
If match is not found, goto Private Sub AD_MISSING
'*****Part two of routine*****
I have a directory where our customer service people deposit forms each day. The form is always the same, with a number of columns that need to be copied into a master list. From there they are analyzed, sorted, etc, then exported, so the number of rows in that list varies from day to day as well. Is there some way to have VBA import each file sequentially from a directory if I do not have the exact file names?
I am using this import code from a macro to start with: .....
I am trying to prompt the user for the directory to be saved in and file name to be saved as; then save the workbook in the input directory with the inputted file name.
View 3 Replies View RelatedI am trying to copy the following files to a single folder; I have 200 excel files each in individual folders and each of these excel files is named like this; order_a1.xls, order_a2.xls up to 200. Each order_-.xls is in an individual folder. This is because each member of staff has a folder called orders with their own copy of order_a..xls IN IT. oNLY ONE FILE PER FOLDER. These folders are on a server called F.
View 4 Replies View RelatedI have a folder containing 1000's of files. All the files end in .txt (for example test.txt) but are actually excel files. When I go to open the files with excel I get the following warning:
The file you are trying to open is in a different format than specified by the file's extension. Verify that the file is not corrupt and from a trusted source before opening the file. Do you want to continue?
I click "yes" and it opens fine as an excel file.
I want to merge all these files one after another into one file.
I wish for a macro to look in to a directory which remains constant, but then looks within a folder which is specified via a cell value in order to load a specific sheet from each file in to the workbook I am currently using. I wish for the loading to be done without having to open the workbooks manually, so something which opens them copies the data from the sheet specified and then closes.
This data is then to be pasted in to a new sheets within my workbook which are named after the file names that it pulls the "dump" sheet from.
As a side note, I will be using these sheets to produce calculations hopefully automatically as soon as they are loaded. They all have the same "shape" but contain differing data. Will it be easier in the long run for me to use this method of pasting data to new sheets named as their file names assuming there will be around 25 "dump" sheets needing to be loaded or would i be better having them paste all to one sheet just underneath each other with a couple of rows separating them?
I have a requirement to search workbooks in a particular folder with specific string in file name. For example, let us assume I need to find a file which contains the name 'RR' in it. The position of 'RR' will vary with files i.e. 'RR' might be present either in the beginning, middle or at the end of file name. All I wanted is to search for file with 'RR' and do some activity and close the file and then goto next file. Similarly, the next search has to be performed with the files containing the name 'BB' in it.
View 1 Replies View RelatedThe script collects all the files in directory and sub-directories and list them in ascending format, I want them to get in transpose format. like for example: Root folder has many sub directories and in them a sub directory XYZ has 5 excel files, it will get the sub directory name in Col A and transpose all .xls files.
Col A | Col B________|Col C_________ |Col D___________|Col E________|
XYZ__|C:/root/test.xls|C:/root/Sales.xls |C:/root/Report.xls |C:/root/sam.xls|
[URL]
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View RelatedI have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....
i'm looking for a macro which within a sheet named "foldernamedump" will list in a column the folder names within a directory I specify. I have seen a couple of sample codes but I just cant seem to get them working at all so I think its best to start from scratch and the work i get supplied here is always perfect. I also want the macro to clear the contents of the sheet before it loads again just to ensure there is no old data within the sheet.
View 5 Replies View Relatedhow can I creat a directory and then save the same file into that directory. At the moment Im using -
ThisFile = Range("T3").Value
ActiveWorkbook.SaveAs FileName:=ThisFile
...which works great, but before I do this, I want to create a folder with the name the name/value in T4, then ofcourse save the file into that folder ....
How can you add the date from a sheet say A1 which is a long date and make a directory which the date incorporated into the new directory name?
View 2 Replies View Relatedi am wanting to automaticaly remove a file from a directory when this directory is populated and move to another directory that is secure, how would i do this? just say directory 1(where it will be removed from) is s:/ddc/reports
moved too-- s:/ddc/test
test folder will be secure
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
how to write vba code using vlookup formula insert pic from picture folder
View 5 Replies View RelatedI wrote the following routine to loop files in folder. I have 4 .xls files in my test folder. This code is only grabbing 1 then exiting. I have used the Dir() loop before with no problems.
Code:
Private Sub GetDataMultipleFiles(ByVal importExt As String, ByVal xFileNum As Integer, ByVal importLoc As String)
Dim Sep As String, myFile As String
Sep = Application.PathSeparator
myFile = Dir(importLoc & Sep & "*" & importExt & "*")
Do While Len(myFile) > 0
[Code] ..........
Lots of XLS files in a directory (C: emp). Each book has only a sheet1 with the data.
I have another workbook that i need to use to overwrite certain values in one column from each book.
The workbook I have has a column A and B, ID and value.
In each file inside the directory, A3 to last row used in A had each ID. If the id matches to an id in the workbook with the new values, I want to take the value from B in the override table and put it in C in the file. Look at each ID in each file against each ID in the override, replace and close.
Hey is there any way to get a list of filenames into VBA from a specific directory?
for example all files in directory c:my documentsexcel?
I have the following
Sub test()
Set fs = Application.FileSearch
With fs
.LookIn = "\directory"
.Filename = "3000333"
If .Execute > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
For i = 1 To .FoundFiles.Count
MsgBox .FoundFiles(i)
Next i
Else
MsgBox "There were no files found."
End If
End With
End Sub
It looks into a specific directory, and tells me how many files beginning with 3000333 there are in that folder. I have over a thousand files in the folder, 13 of which begins with 3000333. However, according to this code, it only finds 10. After searching for various different strings, I've found out that it doesn't search for any file that has a modified date later than 6/2/2006. However, if i just use .Filename = "3000333" , that is, search for all the files in the directory, I get all the files, even those that were modified later than 6/2/2006 that I could not previously find.
Is it possible to get a list of files in a certain directory as a list stored in a spreadsheet?
View 5 Replies View RelatedI would like to list all the files I have in a directory. I know how to do this.
* * *
Now I would like to list just the image files such as PNG, JPG etc. I mean just the files I could get with: Application.Dialogs(xlDialogInsertPicture).Show
My Problem, I don't know what extension is "Todas las imagenes", "All the Images"
I mean the Extension I get When using: Application.Dialogs(xlDialogInsertPicture).Show
I've a master sheet called records. It consolidates all the data from various worksheets. Overtime, the lists gets very long. So I'm proposing this. I want a macro which - Shift all the data yearly into a new directory at
G:MMTPMVarious StockArchive. When it saves at this directory it should bear the year as the folder name. The dates are retrieved from column H. - it should be operated at the every end of the year.
The title pretty much sums it up, actually. I have a macro, and a beautiful piece of work it is. It selects a particular selection of the active workbook, parses it in a particularly thrilling way, and writes the result to a text file. I'd like it to do this for ALL the files in a particular directory (somewhere over 500 files, if that matters).
View 2 Replies View Related
