I might have hit a wrong key or button, which caused a part of the current sheet not being displayed.
First column shown is C, but cols A an B are still in the sheet.
How can I get cell A1 in the left hand corner again?
What I am trying to do is automatically move the date received and the total qty received from the Rcvg. Log sheet to the RFMs Release sheet.
The problem is:
1) I don't know what I'm doing
2) On the Rcvg. Log several part numbers that are the same with different Qtys.
3) on the Rcvg. Log the are several part numbers that are the same using different programs.
What I would like to do is combine all the same part numbers with the same program add the total Qty received and paste the date received and total Qty into the RFMs Release sheet in the proper part numbers row.
Is this possible?
Attached is a shortened copy of the spreadsheet normally there about 3000 entries.
I have created a spreadsheet in the field of marine surveying. In that sheet, I have used a lot of macros (21 modules) and a lot of VBA, most of it provided by kind people on this forum. But what has happened now, is that when I use that particular worksheet, the 'Undo' menu item in the 'Edit' menu has become permanently grayed out and it says 'Can't Undo'.
In other words, I cannot undo, even if I have made the wrong entry in an unprotected cell. If I use any other sheet, or make a new sheet, everything returns to normal. So, is there any way I can re-gain the 'Undo' facility, while using that particular sheet. I am using Excel 2003 on a Windows XP Home (SP3) platform.
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
I have a table on a sheet and you can select/filter some rows. The problem is that on the right i want to have some results with macros etc.
So I have to place everything well above the table because when you filter, rows are hidden and everything is messed up. Is there a way to "separate" the right part? So that when I hide/show rows on the table, it is not affected?
I have 2 sheets in a file. One is given to me from our parts department containing all parts on a given truck model. The 2nd sheet is exported as a database file from inventor and imported as an update able sheet in excel.
I am needed to compare part numbers between the 2 sheets and the qty of each. So far I have it where it matches the part numbers and turns the ones I don't have in the model red. Now I'm trying to match the part numbers and pull the qty of said part from sheet 2, the imported one, and compare it to the to the qty in the 1st. All I really need to accomplish is matching the part numbers then copying the qty from sheet 2 to sheet 1 onto a new cell of the matched part number.
I tried to make something to find a certain value (from a userform) in a range, and then copy the line partially to another sheet. Then go forth to the next found item and do the same. But... I cannot seem to make this loop.
With Sheets("Data input").Range("N5:N1100")
Dim FoundRange As Range
Worksheets("Data input").Activate
[Code].....
I have attached my sample XL sheet. Column A & B will be imported from computer system, only one p/n and quanity. Column C & D will be scanned in from multiple trucks and warehouse, p/n might show up multiple times with different quanities. I need to compare A&B to C&D and come up with a recount sheet that shows the difference as in E&F. Ideally this could be put on another sheet that could be printed out for recounting. Is it possible to do all these different functions automatically. There will be somewhere between 3000-5000 different p/n's.
View 12 Replies View RelatedI am trying to filter my excel sheet based on certain digits in a column of part numbers. The part number has 10 characters. I would like to filter it so that all part numbers where the 4th character is the number 5 or 7 is listed and where the 5th character is a zero. (i.e. R4X5831310 is a part number where 5 is the 4th character; I would like the filter to show this part number)
View 2 Replies View RelatedI'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
Using the below formula. I know that I should get the result of 32 if I am dong this correctly (182 matches part 1 of which 32 match in part 2).
=SUMPRODUCT(--($A$1='7. PM BDE'! $J$3:$J$366))*(--('7. PM BDE'!$L$3:$L$366=1))
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
I have a workbook that is used by others and has been working reasonably well for several years. The users are youngsters who tend to play with it when a bit bored but I usually manage to put things right. They seem to have done something special this time.
The formatting for dates, time and money has gone and I cannot correct it. I have tried the usual formatting of cells, painting formats from other sheets, copying and pasting formats all to no avail. The whole sheet is effected so that new entries appear the same way although the correct format appears in the formula bar.
I don't know if this is relevant but the sheet relies on VBA form inputs. The code is password protected and only I know the password.
The PC is not connect to the internet or a network so I have ruled out a virus. (As far as I know, no floppies or USB sticks have been used on it either.)
Having recently started to get involved in Visual Basic I have managed to write some code that has removed all of my menus except for File and Help. In a blind panic I deleted what I think was the offending VB code in a vain attempt to return the menus. This didn't work. I am now stumped.
Also, I managed to change the way the Cell selection works when I press Return. When I press Return, Excel now selects the cell to the right of the one I was in rather than the one below it. Is there a way I can change this back?
I have been chasing this little devil for some time now and I'm fed up!!
I put a formula in cells formula bar and whenever it decides by itself poof its gone!!!
example formula would be say (in formula bar)
=SUMPRODUCT(--($A$5:$A$200>(h4/24)),--($A$5:$A$200<(h5/24)))
in say cell g31 with answer in cell 31.
Now it just dawn on me, this is an array correct so ctrol,shift, enter may be needed?? If so why do other cells with same idea work?
I just spent 8 hours of VBA coding completed and after exiting excel and re-opening the file, I have seem to lost all the 8 hours worth of VBA coding I just completed. For example, I created an extra module (Module 3) and that disappeared; I updated several SUB commands and even those did not update. My code was about accessing databases using the OpenDatabase method and I noticed that towards the end before I shut it, my connection to the database kept failing (hence the reason why I was closing it and reopening it).
View 3 Replies View RelatedI have 2 basic parts to a Macro which need to be separated by a pause of 1 second, before proceeding to the next part of the macro. Then pause for 1 second, and loop.
Application.Wait is no good to me as the spreadsheet must remain live, editable, and receiving updates from an external program linked via DDE. Below is the ...
I'm essentially trying to place a column that is largely based on another....a function that will calculate the following information
Carriers with 1 Vehicle - 25.00
Carriers with 2-4 Vehicles - 100.00
Carriers with 5-9 Vehicles - 200.00
Carriers with 10-24 vehicles - 400.00
Carriers with 25-49 vehicles - 750.00
Carriers with 50+ vehicles - 1500.00
In other words.
One column in my spreadsheet has number of vehicles. I want another column that will provide the according application fee as found in the information above.
I have two files: let's say File1 and File2.File1 has one column: datas are in a text format.I copy this column. I want to paste it in my second file.File2 is closed.I open it and i paste my column.
Here's my problem. If i let my first file opened, there's no problem(!!): my column is pasted as i want. My datas keep their original format.
But, if i close my first file and after, i open File2 and i paste my column, then my datas lose their original format.My column takes a numeric format.I can see it because my datas are on the left in the column.And i can chek it by a sum: if i do 400+200, for example, the result is 600. In the first case(text format), the result is 0.I don't understand why.If someone can explain me this situation, i'd be happy.I repeat: my second file is closed. I open it after my copy in the first file.
On some worksheets and spreadsheets, when I save the formulas disappear, only to be replaced by the previously calculated values. It has become a real pain.
I assume this is something simple.
A IT Ordering system has been created using Excel, I am prompted to enable Macros, no problem there. The problem is that when I exit the worksheet using a formulas setup as an exit button, my Excel is displayed with my Toolbars missing. I have been unable right-click at the top and re-add these I am only presented with the option to minimise, close etc. 1. How can I replace my Toolbars? 2. Is there a formula fix so that I can use this worksheet without losing my toolbars?
View 3 Replies View RelatedThe thread title is the entire email message I got from a customer (thru the help desk). I have sent back asking her the following:
Is this happening in all excel documents you try or only some? Are you getting any sort of error message? Can you send me an Excel document you are having trouble with and tell me the exact actions you take?
While I am waiting for her answers, I thought I would ask here if anybody knew:What would cause this to happen?What sort of things I should look for?What other questions I could ask her?At the moment I do not know if she was in an Excel workbook that had vba code behind it or not. So my questions are for both what could be in vba code and what she could have done (without knowing) to cause this phenomenon
I have an excel spreadsheet with numbers and the format has to show zeroes at the beginning (e.g. 0011111) It is always going to be a seven digit number. I can format the cells to show the numbers with the leading zeros, but as soon as I save the file as a csv, the leading zeros are lost.
Does anyone know how to the zeros can be retained when the file is saved in csv format?
I have been working on some files in excel for several days, saving regularly, etc. but have run into a huge problem. I was marking cells with a background color to organize and track my work, but the files being saved were .csv's.
From my research, it seems that .csv's only save data, not formatting such as cell background colors.
However, while I was working on the files, they displayed the colors correctly etc.
I am hoping that there is some sort of temporary file created by excel that would allow me to re-open my work and have the coloring appear so I can save the work as an .xlsx file with formatting.
I have a summary sheet using a macro to summarise multiple other worksheets. However, when I run the macro, the summary sheet loses all formatting.
For example, in one column of the "target" worksheets, the data is entered on multiple lines within a single cell, using alt+shift. When I run the macro the formatting is lost and the data in this specific range is displayed in one long row in a single cell. Also, font formatting is also lost.
In the attached example, the top row shows the original formatting on the "target" worksheet, but below that is the formatting after the macro has run and this is what shows on the summary.
I need it to be formatted as on the original if possible.
Have a project going and have had a disturbing trend develop. I'm working in Excel 2003. Upon opening the file and enabling macros, I started receiving File/Path errors, at which point it would shut down the application. When opened, I have a splash that would come up, but it wouldn't go to the next userform. At this point I would get the error message and the file would be closed. If I then reopened the file, disabled macros, saved under a different file name, and then reopened with macros enabled, everything worked fine, until I shut it down and then tried to reopen, at which point the same error would occur.
Lately I have simply been getting the Microsoft Excel dialogue box telling me an unexpected error occurred and it had to be shut down. I'm at a loss for what is causing this. The last time this happened, when Excel recovered the file, it told me a repair had been done, and the repair was to basically delete all of the VBA code from the file.
It appears that my toolbar paste button has been disabled and I think this is due to an auto open macro.
Does anyone know what macro code I will need to run to regain the use of this button?
I feel like I have lost some functionality due to merged cells. For a worksheet change event I have the following:
ElseIf Target.Value = "" Then ... blah blah blah
For a normal cell, every time a cell is deleted (in the appropriate target zone) then it runs the code I have in the subsequent lines
Except it doesn't work for merged cells, unless I manually go into the cell, backspace all of its contents and then press enter
I went to record a macro but I can't seem to get the relative reference button anywhere. I am using Excel 97 - does anyone know why this might be or how I can get it back?
View 9 Replies View Related