Macro Button To Add / Delete Rows Across Multiple Sheets
Jul 24, 2014
I've been piecing a macro together from different sites and have run into a couple issues I can't find resolutions to. I have a excel doc for tracking paint emissions per week. I would like to have a button on my master tab that will add a row and fill the formatting from the line above across all 60 some sheets. Ideally I would like the same button to first prompt if you want to add or delete rows. When adding rows I would like it to add it above the button (there's 3 buttons and for 3 different sections) and if deleting ask which row to delete. If it can't be done in one button that's fine, I can live with that. The big thing I need is for it to replicate across all of the excel sheets. I've attached a copy of the document
View 1 Replies
ADVERTISEMENT
Apr 22, 2007
One more short macro code I would like to have.
I would like to delete rows on all worksheets in a workbook below where the value "Total" exists in column B (same on all sheets).
View 9 Replies
View Related
Apr 2, 2014
I have the following code to delete rows based on the value "No" in cloumn "L". This code should loop through all sheets and delete the corresponding rows.
[Code]....
The code works perfectly but with one little issue. It fails in the first run always with the following error message.
VBA error.png
I need to comment out the line
[Code] ....
continue it with a breakpoint to "End With", remove the comment. Then it loops all worksheets and deletes the rows.
There is no protection or similiar on any sheet.
View 1 Replies
View Related
Mar 19, 2014
I'm trying to track information pertaining to employees across different worksheets in one excel file. I have one sheet that is the master list of employees. The first column of every worksheet is the same (employees names based on their location) but track different information.
I want to be able to create a macro button that will update all the worksheets if i insert or delete an employee from the master list. When a new row is inserted, the other worksheets should be updated as well with the new name and a blank row to be filled in. And when a name is deleted, the entire row should be deleted as well.
View 2 Replies
View Related
Nov 24, 2013
I have a workbook with multiple sheets. I want to use VBA macro to delete the row where the first column is strikethrough. I try to the follow VBA code but it doesn't work.
Sub Macro1()
Dim cell As Range
Dim delRange As Range
[Code]....
View 3 Replies
View Related
Aug 14, 2009
I have a need to add or delete rows from a number of known sheet names using a table of variables on another sheet that tell me the start row of the sheet I need to go to and the number of rows I need to either add (ie copy rows and paste / insert these) or delete (delete rows).
There are multiple blocks of data I mey need to amend on each sheet and the values in my table of variables will change on each iteration (ie if I delete rows from the first block on a sheet, the start row for the 2nd block I need to amend will need to be updated in the table of variables before I can edit the 2nd block on that sheet).
I have been able to get the process to work for a single instance (ie one sheet and amendments to the first block of that sheet) but I can't figure out how to create the loop to elegantly move to the next set of variables and repeat the process for the 2nd, 3rd, 4th block etc on the first sheet and then move to the 2nd sheet to repeat the process etc.
Public Sub EditCurrentBlock()
Dim rowcount As Integer
Dim startrow As Integer
Dim endrow As Integer
Dim rowcountBal As Integer
'Dim selSheet As Worksheet (tried to use this to nominate the sheet variable but
' had problems so scrapped it)
'Reconfigure the GP Revenue block.................
View 2 Replies
View Related
Jul 30, 2013
I'm pasting a lot of data into a spreadsheet and then using a macro to split the data into three different sheets/tabs. I'm doing this by simply copying entire columns. Each sheet/tab has a headings row and autofilters added so that my boss can filter on certain manufacturers in one of the columns.
The problem is that when he selects a manufacturer, at the bottom left corner of the screen it shows the number of records, which at the moment will be something like "6 of 65211".
The actual sheet only has a few hundred rows (not 65211). So how do I delete all the blank rows beneath my data using a macro or vba code?
As an extra point, I'd like to use column B to check for blank rows (not column A).
View 6 Replies
View Related
May 10, 2012
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
View 1 Replies
View Related
Feb 23, 2011
how they can be used to delete rows that meet multiple criteria, however all the examples I have found seem to be rather complex and personal to the individuals as opposed to being rather generic. Many people, including myself would find it useful to have a simplified generic answer that can be applied to all kinds of criteria. Such as if the data in column B = x and the data in column C = y delete the row. Here is my example.
SCENARIO EXAMPLE:
In column A - Date e.g. 05/02/2011, 06/02/2011
In column B - Day
In column C - Time (in format 09:06:21)
In column D – Service numbers dialled (70, 110, 224) two to three digits long
MACRO EXAMPLE:
Delete the row if the criteria in:
Column D = 10, 40, 192 or 244
And
Column C is between 09:00:00 and 16:00:00
macro code or at least a link to a thread that they think gives a scenario as simple as this.
View 5 Replies
View Related
Jan 31, 2014
Sorting.xlsx
I am trying to figure out how to make a macro that can sort some numbers from Largest to Smallest within a specific range on multiple sheets. The range is only within column D starting with cell D11: (until the data ends) on all the sheets in my workbook (the number of sheets may change with time) except for Sheets: "A", "B" and "C".
In other words I want the sort to work on all sheets except the first 3 sheets which are named Sheet A, Sheet B, and Sheet C.
I have attached a spreadsheet for an example of what I am saying.
View 5 Replies
View Related
Jul 10, 2014
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
View 6 Replies
View Related
Nov 5, 2008
How to create a macro to search a value and delete the row but I'm having trouble trying to get this to search multiple values. Keep in mind I'm really new at attempting to create a macro so this may look terrible ;-)
I have a list of 20 numbers (changes from time to time) and I need to filter any row containing any one of these numbers out of my results each day. I am currently able to filter a single group of numbers but get an end error every time I attempt to string a group of numbers.
This is what I have so far and is an example. We'll use three numbers as an example.
"12345","12346","12347" are the numbers that we'll use for the example that I need to filter. The code that I have is:
View 13 Replies
View Related
Apr 9, 2009
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
View 9 Replies
View Related
Jul 22, 2012
I am looking to create a sheet that automatically updates itself in alphabetical order, when we enter any data.
here is the case:
- I've 30 secondary sheets and 1 master sheet
-----------------------------------------------------sheets detail-----------------------------------------------
Master Sheet detail:
master sheet's column A contains name from A3 to A100 (user can edit this column)Column B to to AM contains data corresponding to each name in column A
Secondary sheets detail:
column A contains name from A3 to A100 which are linked to master's column A (means any change in Master sheets' column A will change this column).................. (user cannot edit this column)column B to I contains corresponding data.
------------------------------------------------------------------------------------------------------------------
I want that when user enters a new Name in master sheet and presses "Enter" then:-
Column A of master sheet should automatically arrange itself in ascending order, along with all the corresponding data in column B to AMsince secondary sheet's column A is also linked with master sheet, so they should also be updated along with their data in corresponding columns i.e B to I
I've tried other websites and solutions for sorting of rows but since i've little experience with excel VBA, things are not quite working for me.
View 5 Replies
View Related
Mar 15, 2012
I have a command button that upon its click I would like to delete a specific row. I am using a vlookup which is giving me the row of the number I would like to delete. How do i go about deleting out this row?
this is also a radiobutton within the row that I would like to delete out as well. It is not named but it linked to column B within the row that I will be deleting.
View 3 Replies
View Related
Nov 3, 2013
I have a spreadsheet containing 100 "requests" which can be made by a user
i would like the option for the user to be able to delete a request should they wish it either by deleting a row or clearing the contents
Currently I have a single column which is full of buttons (one for each row)
when i click the button on row 10 I would like row 10 deleted
when i click the button on row 30 i would like row 30 to be deleted etc
is there a way to do this without writing 100 macros which are specific to each line?
View 4 Replies
View Related
Oct 25, 2013
Currently have a sheet that allows me to pick an item from a drop down list and show me the code for that item.
I already the macros for adding an item to the list via a add button. All this dose is if the item is not on the list i can simply be added into the two boxs and then click the add button.
What i want to do is add a delete button. This is in case someone enters the values wrong then can select it in the list and then click the delete button.
So all i want is to look at the item cell, match to a range and delete the row.
I have added a link to what it looks like as well as the coding i have used so far. [URL] ........
Sub Add_to_list()
'
' Add_to_list Macro
' Adds new item to list
'
'
Range("F10").Select
Selection.Copy
[Code] .......
View 2 Replies
View Related
Jun 23, 2007
I have a WB where the first sheet is "Introduction", second is "Master Data" wherein the name of players with some details are kept.
After that some sheets are there which are linked to "Master Data" ie say Sheet2,sheet3,Sheet5 (sheet 4 is not linked to "Master data" but appears after sheet3)
I want that if a record , say record 3 at row 5 is deleted also delete that record 3 in other linked sheets ie Sheet2,sheet3,Sheet5 The positions of the records differ from sheet to sheet ie if record 3 is at row 5 of master sheet it coulsd be on row 8 of sheet2, at row 10 of sheet3 & at row 6 of sheet 5. All the name of the person are linked to sheets with =masterdata!B5 like this.
View 9 Replies
View Related
Oct 16, 2009
I have a workbook with 31 sheets. Each sheet has 15 textbox button that call macros.
I would like to hide 1 textbox on all sheets until another macro is called. I know how to get the textbox names to be able to hide them, But because these text boxes were copied most of the are the same name, however on severl sheets they are different names "Textbox 4 on most sheets but it could be textbox 34 on others. The ones I want to hide all have the same text label. Is it possible to get VBA to return the label text.
View 8 Replies
View Related
Aug 21, 2007
How can we delete entire row using VB Code.
say example i want to delete a row having name 'Anis' by clicking on a buttton
is this possible?
View 9 Replies
View Related
Nov 26, 2008
how i might create a macro to attach to a button so i can delete the contents of all VALUE! cells. Either this or have a script in the background so no cell will return VALUE! (or any other error if possible)
I know if i had all the formulae sorted they might not butit's quite a large spreadsheet. The reason for the VALUE! error is text in cells that the formal points.
View 2 Replies
View Related
Aug 12, 2009
I would choose to select the delete button. I've created a new worksheet within a workbook, insert text and formatting, and copied to a specific place in the active worksheet. Everything works well except 1. there is a LOT of coding because I recorded the macro and 2. the delete message pops up for every files the macro manipulates. I have to click "delete" about 60 times throughout this macro and would love to be able to let it click its own delete button!
View 6 Replies
View Related
Feb 21, 2007
I have 3 command buttons that I would like to do the following.
1 - I need to change the macro below to add the record to multiple sheets. (I've been told how to do it but I guess I just didnt hold it in).
Sub Copy()
Dim rng, dest As Range
Worksheets("sheet1").Activate
Set rng = Range("A1:J1")
rng.Copy
Worksheets("sheet2").Activate
Set dest = Cells(Rows.Count, "A:J").End(xlUp).Offset(1, 0)
dest.PasteSpecial Transpose:=True
Application.CutCopyMode = False
End Sub
2 - How can I change this code to find the record by enetring the First and Last name (A1 and B1) click on the command button and some how getting all the fields for sheet2 (A:J) in sheet1 for that record.
3 - Change the code to delete the record (A1:J1) from all the sheets.
View 2 Replies
View Related
Dec 19, 2007
error in my code, its the final part of the jigsaw for me to complete my project.
I am trying to find a variable that the user types in my spreadsheet and delete columns from several worksheets. I'm really close but keep getting the above error.
Here is the code.
Sub DeleteEmp()
Dim RemoveEmp As String
''' CURRENTLY DOES NOT WORK FOR SOME UNKNOWN STUPID REASON
MsgBox "Warning. This process will result in the permanent removal of an employees datails"
FinalWarning = MsgBox("Should I continue?", vbYesNo Or vbDefaultButton2, "Confirmation")
If FinalWarning = vbNo Then
View 4 Replies
View Related
Mar 11, 2014
I have a sheet with macros that allows users to fill in data from columns F10 to O10 from row 10 to 54.
Column P will then make some computations based on the inputs from col F to O.
Row 55 will also make some computation based on inputs from row 10 to 54.
How to I modify the code below to allow users to either add/delete columns and rows such that it does not fowl up the computations?
The computation does not have to be at column P or at row 55, they can be dynamic and change depending on how many rows and columns the users delete/add.
A little background on what the code does. From Column F to O, the code UNLOCKS the columns only if user inputs date in Cell 3 of that particular column.
Example. Column F is locked from F10 to infinity at the start. Only when user inputs date into F3 does the cells F10:F54 is unlocked for user to input data.
This goes on until column O. I want users to be able to add more columns, or delete ones they don't need.
View 2 Replies
View Related
Jun 11, 2008
I'm building a course registration workbook and am working on the unregistration macro.
I have a seperate worksheet for each course, labelled by the course code.
There is also a page for each registered participant that shows what courses they're in.
The macro reads off the information on the participants page, and then should goto each registered course's page, look in column C for their name, find it, delete the contents of that row for Columns C to G (has their other information) and then shift all CELLS (not rows) below the now deleted cells up 1 to keep track of the order they were added.
I've tried recording my own macro and editing... but it doesn't work very well for this.
I've also tried searching and come up with nothing, but if someone can look at my code, and/or point me in the right direction, it would be greatly appreciated.
For Each ws In Worksheets
'checks only course sheets that match the courses the individual is registered in.
If ws.Name = unregisterCourse1 Or ws.Name = unregisterCourse2 Or ws.Name = unregisterCourse3 Or ws.Name = unregisterCourse4 Or ws.Name = unregisterCourse5 Then
'Should search for the variable "unRegister" in column C and select it.
Cells.Find(What:=unRegister, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Select
'Now needs to select the four cells to the right as well (C:G) and delete them
'Select all cells below from C:G and shift them up one.
End If
Next
View 5 Replies
View Related
Jul 2, 2014
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
View 8 Replies
View Related
Sep 29, 2011
Need to create a macro?
Delete rows where multiple column meets multiple criteria.
detail:
delete rows where
Column H is less than 10000
AND
Column C is empty(blank)
Those 2 criteria have to occur at the same time..
View 1 Replies
View Related
Mar 4, 2014
I have an excel form with a command (submit) button that opens up Outlook when clicked. I am looking for a way to have this submit button disappear when the user selects a specific item in a drop down list to make sure they do not email the form when it is used for a promotion (Promotion would be selected in the drop down).
View 8 Replies
View Related
Nov 3, 2009
I am trying to make a button that will re-initialize the workbook: clear (delete) all unlocked cell's values. I have the following
View 5 Replies
View Related
