I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
how they can be used to delete rows that meet multiple criteria, however all the examples I have found seem to be rather complex and personal to the individuals as opposed to being rather generic. Many people, including myself would find it useful to have a simplified generic answer that can be applied to all kinds of criteria. Such as if the data in column B = x and the data in column C = y delete the row. Here is my example.
SCENARIO EXAMPLE:
In column A - Date e.g. 05/02/2011, 06/02/2011
In column B - Day
In column C - Time (in format 09:06:21)
In column D – Service numbers dialled (70, 110, 224) two to three digits long
MACRO EXAMPLE:
Delete the row if the criteria in:
Column D = 10, 40, 192 or 244
And
Column C is between 09:00:00 and 16:00:00
macro code or at least a link to a thread that they think gives a scenario as simple as this.
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
I would like to hide rows for data that does not meet specific criteria. For example: If a user selects room number 101 from a drop down in B1, I want to filter data in range A3:F1000 to show me only room 101 rows (A column) where C column contains a value larger than zero OR D column contains a value larger than zero OR E column contains a value larger than zero. I do not want it to return rows where 101 may be in other columns beside A.
Sample:
A B C D E F
__________________________________
1 ROOM: 101
2
3
4 101 XX 1.2 0 0 P
16 101 YA 0 0 1.1 L
23 101 JJ 3.2 2.1 0 L
55 101 JJ 0 0 1 P
So, if a row contains 101 in column A and all three values in columns C, D, and E equal 0, then those rows will be hidden.
Need to create a macro?
Delete rows where multiple column meets multiple criteria.
detail:
delete rows where
Column H is less than 10000
AND
Column C is empty(blank)
Those 2 criteria have to occur at the same time..
i have several student ID results that have conditional formatting in place. I'd like to KEEP the following data but delete/hide everything else:
1) Filter out purple rows
2) WITH filtered rows: KEEP any scoreA that's 100% or less than 85%
3) Look at Score A and Score B - KEEP if the difference is greater/less than 5%
4) If a student took testB but didnt take testA, KEEP.
I have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as:
"T" "["
"T" "#"
"T" "@"
"T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
I had a raw data sheet in which i need to prepare a statement just like the attached worksheet.
My requirement is to delete all those rows in the department column except the department which starts with "C" Just like "CNN" & "CNN-IN".
Rows with data containing the words starting with "CNN" should not be deleted .The rows can contain words with "CNN" or "CNN*"(here * denotes anything after the word CNN)
I had just formatted the whole worksheet for easy reference.Actually the raw data is extracted from other program which is very clumsy & irregular.
The department column might be in any column.
Is there a vba code that can delete the entire row based on two criterias? If a row has a location of Canada and is a female, then delete the entire row.
Name Location Gender
Alan Mexico Male
Dick USA Male
Sharon Canada Female <-- This will be deleted if based on criteria
Mike Canada Male
I am a pharmacist that runs reports and I need to sort and exclude data
It is in Excel 2003 format
I run a report that includes a patients name in one column, the medications name in another column and if the medication was withdrawn, wasted, returned or restocked in another column. Withdrawn, wasted, returned or restocked are treated as different functions and each have their own row entry. Patient and medication name are the same in all situations
I need a macro that will look at the patients name and medication name, see if it is the same and delete all rows that have a withdrawal with an associated wasted, returned or restocked.
I am trying to use the code below to eliminate data in a spreadsheet based on certain criteria. I have been able to get this to work with text fields just fine, but now I am running into an issue with numbers. I am trying to get this code to delete rows if they have the word "unknown" in column C and if the value in column B is greater than 900 hours (999:00:00), the numbers in this column are formatted as [hhh]:mm:ss. What should I tweak to make this work?
View 7 Replies View RelatedI have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
View 8 Replies View RelatedI am trying to figure out how to have some VBA look down Column 1 and where the Cell's string value = "GRANDTOTAL", to DELETE that ROW and ALL ROWS below.
Can anyone help me out in writing the Visual Basic code?
few macros/vba that delete rows based on criteria in a cell.
I'm after something a little different. I have a workbook with sheets called Raw Data1, Raw Data2,Raw Data3, Raw Data4 and Raw Data5 and Menu.
There is a column of data in each of the sheets which has a column header of 'Location', however the column where this is located will vary from sheet to sheet. For example in Raw Data1, this is column 'J' and on Raw Data2 it will be column 'M', ( I'm not at work and can't remember the specific column positions for all sheets re: 'Location').
Is it possible to have on the 'Menu' sheet, say in cell B5 a value of 'Locationa' and have rows be deleted in each of the Raw Data that do not match the value in B5?
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341.
Sub DeleteRows()
Column_To_Check = 1
Start_Row = 1
End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row
MsgBox End_Row
Search_String = "SA341"
For Row_Counter = End_Row To Start_Row Step -1
If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then
ActiveSheet.Rows(Row_Counter).Delete
End If
Next Row_Counter
End Sub
if in column A in some row is text "today" then delete this row and delete all rows until in row B wont be empty cell. I have start (If in A is "Today" then ... ) but thas's all
View 5 Replies View RelatedI am attempting to create a macro that will delete an entire row, based upon multiple criteria. The data looks something like this:
-----Column A-----------Column B---
1.-- Computer_X ------- Software_A
2.-- Computer_X ------- Software_B
3.-- Computer_X ------- None
4.-- Computer_Y ------- None
5.-- Computer_Z ------- Software_A
6.-- Computer_Z ------- None
I would like to delete the entire row if:
1) Column B entry is "None"
AND
2) Column B has entries other than "None" that match Column A
So I do not want to delete a row with a unique name in Column A and "None" in Column B. I only want to delete the rows that have "None" in Column B, and multiple entries for the match in Column A.
Using the data example above, Row 3 and 6 would be deleted. Row 4 would not be deleted, since Column A (Computer_Y) had only one row of data, with "None" entered in Column B.
I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.
Please see the attached, it is more clear I hope. The two yellow rows would be deleted.
The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"
I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.
The objective is to:
To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.
TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.
I want to delete the rows if they do not equal "TL" based on certain criteria, but save the info
then delete the rows if they do not equal "Fedex" based on certain criteria, but save the info
then delete the rows if they do not equal "LTL" based on certain criteria
After the information has been filtered it is supposed to load to a template giving monthly information for each of the above, but this is not working
VB:
If Load = "LTL" Then
Range("A2").Select
Selection.Sort key1:=Range("F1"), order1:=xlDescending, Header:=xlYes
For x = 2 To TotalRows
If Cells(x, 6).Value > 10000 And Cells(x, 1).Value = "FEDX" Then
[Code] ....
I am pretty sure that my problem lies within the parenthesis where it says Rows("2:" & x-1).Delete. Am I supposed to put something else there since I am deleting rows based on three different loads?
I have macro code to hide rows based on a certain critera but I don't know how to adapt the code to delete the rows. Basically it checks a column and for every row
View 9 Replies View RelatedI need create a macro to perform the following - I don't know if it needs to be an Excel macro or via VB. This is to speed a process up and eliminate any spreadsheet messing around for our "admin" staff - they are not good with excel at all!
So, I have a daily/weekly down load of a spreadsheet (exported from access).
* I want to copy the values of column AK to A
* Then delete all entries in column D that equal 19, 20 and 6
* Then delete all entries in column AL that equal "A","B","C" or "D" but not "E","F" or "G"
* Then delete entire rows where the value in column A is a duplicate within the list
I will call this spreadsheet, for the purpose of this exercise, the "Master". I now have another spreadsheet with values in that should relate to values in either (or both) columns A and B in the "Master". I need Spreadsheet 2 values to be highlighted as cross checked in the "Master" and then all those in the "Master" that do not appear in the 2nd S/S will be normal white cells thus showing that they need to be chased by our Admin staff.
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
I was searching for a macro to delete rows that obey a specific criteria. I downloaded [URL]..... and copied the Loop Example to my WorkBook.
When using Mr. de Bruin example, it worked perfectly, it did really delete the rows that obeyed my ">2" criteria. Although, when using on my workbook, the macro deleted the values, not the entire rows. Here's what's happening:
I would like to delete rows, not only values.
Code:
'The code below will delete every row in the usedrange with "ron" in the A column.
'If .Value = "ron" Then .EntireRow.Delete
'
'I use the A column in my example, change the A to your column in this code line.
'With .Cells(Lrow, "A")
'
'Change ron and the A to your search word and column before you try the macro.
'See the examples on the worksheet if you want to do something different.
Sub Loop_Example()
Dim Firstrow As Long
[Code]....
I have a table of data with which I need a macro to clear a range of data based on certain criteria. I have attached a file as an example. In this example the current period is 6. I therefore need to clear columns which have a period of 7 or higher.
Essentially, if the current period is x, then clear the range in the period columns if the period is greater than x.
I am trying to adapt a macro which deletes all rows in Worksheet 1 where the date in column K differs from a date in Worksheet 2. The date in Worksheet 2 will change each day.
I think the macro below could be used, but don't understand how to replace the "Value = ":70:" with a reference to the master date in Worksheet 2.
Sub test() Dim lr As Long, i As Long lr = Range("A1").End(xlDown).Row
For i = lr To 1 Step -1 If Cells(lr, 1).Value = ":70:" Then
Cells(lr, 1).EntireRow.Delete End If lr = lr - 1 Next i End Sub
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.