Need to create a macro?
Delete rows where multiple column meets multiple criteria.
detail:
delete rows where
Column H is less than 10000
AND
Column C is empty(blank)
Those 2 criteria have to occur at the same time..
I need create a macro to perform the following - I don't know if it needs to be an Excel macro or via VB. This is to speed a process up and eliminate any spreadsheet messing around for our "admin" staff - they are not good with excel at all!
So, I have a daily/weekly down load of a spreadsheet (exported from access).
* I want to copy the values of column AK to A
* Then delete all entries in column D that equal 19, 20 and 6
* Then delete all entries in column AL that equal "A","B","C" or "D" but not "E","F" or "G"
* Then delete entire rows where the value in column A is a duplicate within the list
I will call this spreadsheet, for the purpose of this exercise, the "Master". I now have another spreadsheet with values in that should relate to values in either (or both) columns A and B in the "Master". I need Spreadsheet 2 values to be highlighted as cross checked in the "Master" and then all those in the "Master" that do not appear in the 2nd S/S will be normal white cells thus showing that they need to be chased by our Admin staff.
Any quick way to extract data from a table. I need to extract a value from a column that meets criteria from two different columns. I thought I could get this to work with vlookup, but have had no success. Sample data below in table 1 and I would like to get my data into table 2.
elevation
type
grade
percent
weight
5000
5000
5000
5020
[Code] ..........
I am trying to create a macro to accomplish the following task. Delete if the value belongs to queue "ab cd ef" and is also a part of category "xxx xxx".
I wrote the following code, but it seems it is doing some mistake:
Code:
LastRow = Range("Z2").End(xlDown).Row
For i = 2 To LastRow
tempQueue = Range("C" & i).Value
tempRange = Range("Z" & i).Value
If (tempQueue = "ab cd ef" And tempRange = "0 - 1 day") Then
Range("C" & i).EntireRow.Delete
[Code] ........
The above code works fine but it deletes only 120 rows out of 200 or sometimes 150 out of 200. Can't get it to work all 200 rows.
i have several student ID results that have conditional formatting in place. I'd like to KEEP the following data but delete/hide everything else:
1) Filter out purple rows
2) WITH filtered rows: KEEP any scoreA that's 100% or less than 85%
3) Look at Score A and Score B - KEEP if the difference is greater/less than 5%
4) If a student took testB but didnt take testA, KEEP.
Have a worksheet Pricelist, require to pull data from the columns to a new worksheet only if qty is more than 0, and delete empty rows afterwards. Required result is in worksheet order. Original file is about 10K rows.
Attached sample file : example.xls
I would like a macro to find the columns named "apple" and "peach" and delete them. These would always be in row 1 but would always be in different column letters which is why I want the macro to simply find these columns by their name and not by their column letter.
And yes, I do mean the entire column altogether, shifting entire columns to the left. Wipe it off the face of the earth
how they can be used to delete rows that meet multiple criteria, however all the examples I have found seem to be rather complex and personal to the individuals as opposed to being rather generic. Many people, including myself would find it useful to have a simplified generic answer that can be applied to all kinds of criteria. Such as if the data in column B = x and the data in column C = y delete the row. Here is my example.
SCENARIO EXAMPLE:
In column A - Date e.g. 05/02/2011, 06/02/2011
In column B - Day
In column C - Time (in format 09:06:21)
In column D – Service numbers dialled (70, 110, 224) two to three digits long
MACRO EXAMPLE:
Delete the row if the criteria in:
Column D = 10, 40, 192 or 244
And
Column C is between 09:00:00 and 16:00:00
macro code or at least a link to a thread that they think gives a scenario as simple as this.
I am trying to use the code below to eliminate data in a spreadsheet based on certain criteria. I have been able to get this to work with text fields just fine, but now I am running into an issue with numbers. I am trying to get this code to delete rows if they have the word "unknown" in column C and if the value in column B is greater than 900 hours (999:00:00), the numbers in this column are formatted as [hhh]:mm:ss. What should I tweak to make this work?
View 7 Replies View RelatedI have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
View 8 Replies View RelatedA macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
I have a file with many intercompany transactions. There is a range of business unit numbers that if anyone one number is in both Column B "Bus Unit" and Column E "Affiliate" I want the row deleted.
Please see the attached, it is more clear I hope. The two yellow rows would be deleted.
The list of business units that I would want to never be on the same row is "4, 7, 41, 44, 46, 51"
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
I am looking for an Excel VBA code that can delete pair of rows that has certain criteria. I have included an example in the attachment and highlighted the rows that should be deleted. Since the values in each coloumn is going to change every day , I am looking for a dynamic code.
The objective is to:
To delete rows that has same code (columnd D), same basis (coloumn E), same Effective (coloumn H), value of TT (Column J) is either TI or TO and has offsetting Amounts (L) ie the sume becomes zero. Example pair of row 7 and row 8 as well as pair of row 12 and row 13 should be deleted.
TO and TI are actually transfer in and transfer out. Since the TI and TO for these rows make the amount zero for same code and same basis on the same effective date, I do not want to include this in the spreadsheet.
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
I have a workbook with multiple sheets. I want to use VBA macro to delete the row where the first column is strikethrough. I try to the follow VBA code but it doesn't work.
Sub Macro1()
Dim cell As Range
Dim delRange As Range
[Code]....
I have a large file of invoices, and some have been paid. The problem is, sometimes it is not paid against the correct invoice, so I have a lot of credit and debit that should offset each other. I want to go through the sheet and highlight all the rows that has a matching ID and an a 0 value when total amount column was added up to another row. I would like it so that it highlights a different color for every pair of offsetting amount, but the same color highlight is fine too.
View 2 Replies View RelatedI have a large amount of data, 40,000+ rows about how students do in remedial classes including from whom they took the classes. I have pulled from it a subset of student success as relates to the separate instructors. Now I would like to extract a consolidated list of those instructors for whom the student gain on criterion based pre and post course assessments is above a specific level. I have no trouble writing if statements that will look at two types of data, the course taken and the average student increase to determine which instructors meet or surpass the criterion, but I can only do that within a list that includes all the instructors. Because there are more than an hundred such instructors, it would be easier for the dean if I could provide a short list of those that meet specific criteria. I believe that it would be an array that I should use, but I have been fooling around with this for 2 days now, and am finding myself at a series of deadends!
View 5 Replies View RelatedI'm using the following on the Worksheet_Activate event to update rows with the date, (Cell AD1 contains the current date):
Code:
Range("X2:X2000").Formula = "=IF(IF(ISBLANK(W2),,$AD$1)=0,"""",IF(ISBLANK(W2),,$AD$1))"
Is there a way I can amend it so it only updates those cells which currently have no data?
At the moment it is changing every cell with the date which overwrites existing dates - I want it to update the new stuff only.
I want to scan all sheets in a workbook and to delete a first row where a value in cell(1,1) is "table".
Sub DeleteFirstRowInWorksheet()
Dim SheetName As Worksheet
Dim i As Integer
For Each SheetName In Sheets
If Range("A1") = "table" Then
Rows("1:1").Select
Selection.Delete Shift:=xlUp
End If
Next SheetName
End Sub
It delete only in an active sheet. What's wrong?
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.
I have a spreadsheet of prices (raw data), and I need to pull out both the most recent price for each item for a specific customer code for each item, as well as the second most recent price, (essentially the old price), for that customer code for each item.
I have columns for ITEM (code), PTC (Customer Code), PRICE, and EFF (Effective Date). For each item code, there are multiple prices for multiple customers, such as in the linked workbook.
I am currently using the formula, =INDEX(PRICE,MATCH(1,(F2=ITEM)*(G2=PTC),0)) to pull out the last price. This works because the last price is on top based on sorting. What I need is a formula that pulls out the next oldest price for that item/ptc combo. I tried using the SMALL function to no success.
[URL]
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I need to find all rows that have columns that match in all 3 of the columns.
I then need to delete all but the last row in each "group" of rows.
like:
1 q w e
2 q w r
3 q w r
4 q w r
Delete rows 2+3
create a formula,for multiple criteria with multiple results in rows.
[URL]
I have a need to delete multiple rows with multiple criteria; criteria contains about 400 different and unique entries that have to be deleted. The code I obtained from this forum was modified but only deletes some entries and bypasses others. Row 1 is header and column 1 contains criteria that it it meets the " Case" it is supposed to be deleted. Example of code is below the Case has been shorted, for posting but normally each case runs the maximum length allowed. Please let me know where I messing up, I am thinking the it needs to be looping until all entries are deleted but I don't know how.
Sub DeleteRecords()
Dim n As Long, lastrow As Long
Dim ty As String
Dim a As Integer
lastrow = Range("D65536").End(xlUp).Row
a = 1 'this is the column in which you will find the notation finance numbers (Col X = 24)
For n = lastrow To 2 Step -1
ty = UCase(Cells(n, a))
Select Case ty..........................
In theory I know what I should do, but I don't know the syntax. So here it is:
There are 1450 unique records in my XLS, every record contains 45 different rows(these are the phases) with their position(1....45). Every row has a status (Not Started, In Progress, Complete)
COLA(uniqueid)....COLi(it is a number, it is the position).....COLN(status)
id1....1......status
id1....2......status
id1....3......status
.
. .
. .
id1 ....45.....status
id2.....1.....status
.
.
.id(n)
basically I would like to get the last "in progress", If not found, the last "Complete, If not found then the first "Not Started". and put a "Y" right next to the row to a new column for all the groups(45 rows)
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....