Hide Button Or Textbox Based On Caption Across Multiple Sheets
Oct 16, 2009
I have a workbook with 31 sheets. Each sheet has 15 textbox button that call macros.
I would like to hide 1 textbox on all sheets until another macro is called. I know how to get the textbox names to be able to hide them, But because these text boxes were copied most of the are the same name, however on severl sheets they are different names "Textbox 4 on most sheets but it could be textbox 34 on others. The ones I want to hide all have the same text label. Is it possible to get VBA to return the label text.
View 8 Replies
ADVERTISEMENT
Jan 22, 2009
After scouring the entire OzGrid, I have found the following two macros that partly satisfy what I want to achieve. BTW, following two macros are executed on Sheet2 and I want to achieve the following:
On Worksheet_Activate, show columns that match the criteria value in Sheet1.D4 (Sheet1.D4 contains a dropdown list with about 6 text values). In addition to that, if Sheet1.D4 value is blank then show all columns. Right now, it successfully shows columns that match the D4 value but does not work if that D4 value is left blank, instead it hides all columns in range (C:CV). So in short, to the first macro, I need to add the criteria if D4 is blank, then keep the sheet intact and don’t hide anything, just show all columns.Once on that sheet after the Worksheet_Activate event has occurred, with the second macro “ToggleColumnsVisibility” following things need to happen. BTW, currently this macro is assigned to a button (from Forms Toolbar).If cell D4 has a value, then the button’s caption should read “Show All” and when that button is pressed, it should show all columns in the range (C:CV), and the button's caption needs to change to “Show Selected”. In “Show Selected” mode, when that button is pressed, it needs to show all the columns that match the D4 value.If cell D4 is left blank, then the button's caption should read "No Action" and when the button is pressed, it should not do anything but just show all columns.
As you will notice in the header, my experience with Excel is very limited, so detailed instructions will be greatly appreciated. I am also hoping that proposed solution uses some of the efficient/effective ways of using loops such as described below (example taken from this website from this link http://www.ozgrid.com/VBA/SpeedingUpVBACode.htm)
Sub TrueOrFalseFaster()
Dim bYesNo As Boolean
Dim i As Integer
bYesNo = (i = 5)
MsgBox bYesNo
End Sub
Sub ToggleTrueOrFalseFaster()
Dim bYesNo As Boolean
bYesNo = Not bYesNo
MsgBox bYesNo
End Sub .........
View 9 Replies
View Related
Jan 29, 2014
I would like to have a macro that will hide a column based on the value in the row. I have multiple sheets and if row 4 (or more specific, B4:AL4) contains a zero, then I'd like the whole column to be hidden on that sheet. I'd like to be able to run the macro and it evaluate every worksheet.
View 5 Replies
View Related
Mar 7, 2008
I want by using some code I've seen on this forum or using the macro writer and then tweaking the code. So with that said, I've written the attached code but I know there is probably an easier way to write it. It cycles through about 12 sheets using the same below code, but I didn't list that code.
Sub Hide_Rows()
Dim i As Integer
For i = 3 To 418
Sheets("AFA - UMBI").Select
If ActiveSheet. Range("b" & i).Value = "2008-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-1" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
End If
Next i
End Sub
View 7 Replies
View Related
Feb 9, 2008
I am displaying cells in textboxes depending on the results of a listbox selection. I was wondering if there is code for making the textbox names variable (so I could just loop through the offsets and textbox names)
the code below works but I would like to make it more versatile and shorten it.
There are other textboxes on the page.
Sub detailfill() ....
View 9 Replies
View Related
Apr 15, 2008
I have a fairly elaborate close-down routine for my workbook.
1) Quit out of fullscreen (restore initial state of excel before saving)
2) Hide all sheets but one (enforces cant do anything unless macros enabled)
3) Automatically save without a prompt
4) Close the workbook
I've researched it well and implemented it to the point where it works, but only if the user clicks the excel application close button -- the "X" in the titlebar (hence not in fullscreen).
However, if I launch the process via a userform button click, then for some reason the
DisplayFullscreen = False, Sheets hiding, and save codes have no effect (fullscreen persists, sheets are not hidden, no file is saved) in the Workbook_BeforeClose() subroutine....
I repeat: all the above works fine if process was launched by "native" excel button, but does not have any effect if launched from a userform commandbutton. (?!?!) any ideas what's going on?
I'm including my code so you can get an idea how it's structured.... by it's pretty "by the forum" as far as I can tell...
Private Sub CloseButton_Click()
If(1) Then
'Method 1 - close directly from userform command button
With ThisWorkbook
'.RunAutoMacros (xlAutoClose)
.Close
End With
Else
'Method 2 - set a timer to call a function to perform
' "ThisWorkbook.close" in a function outside of the userform
CustMenuCloseTimer = Now + TimeSerial(0, 0, 2)
Application .OnTime CustMenuCloseTimer, "CustMenu_CloseAction"
End If
End Sub
View 3 Replies
View Related
Jul 18, 2014
[Code].....
I am trying to edit a textbox caption in an active chart with a macro and cannot figure out the correct way to reference the text property. I have been successful in editing other items within this chart via the complete code below (i currently have textbox edit commented out)
[Code].....
I know i can set it up with a helper cell to have the textbox reference a range (that updates with the text i want) but i'd to try and edit the text without the use of helper cells to try and make this a little more break resistant.
View 5 Replies
View Related
Feb 26, 2013
I have two text boxes on a userform that are used to populate a label caption based on the textbox values. How do I set the label caption to update once a a textbox value is changed?
View 2 Replies
View Related
Jun 11, 2008
I'm buildng a userform for data input.
As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.
I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"
If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If
View 5 Replies
View Related
Jan 9, 2007
Is there a way to program a VBA button so that its cell location is known. For ex., I have a button that says "Fail". I'd like to program it in such a way that when the user clicks on it, the text "Fail" is inserted into the cell next to it. How do I avoid hard-coding the cell reference?
View 5 Replies
View Related
Jan 24, 2008
I need a macro for button1. The name of button one is "on" when clicked I want it to put an "X" in A1 and then change the button name to "off" When clicked again I want it to delete the "X" in A1 and change the name back to "on". When clicked again it repeats the same process.
View 7 Replies
View Related
Aug 31, 2007
I have used the Forms toolbar to create a command button on a chart.
However, the text for the command button is hidden. If I do an "Edit Text" on the button, it shows up, but otherwise the button appears blank, even when selected.
View 9 Replies
View Related
Feb 14, 2008
How do you references the properties of a shape? I am having trouble with 2 different types. Firstly, I have a worksheet with a group of commandbuttons (all added using the Control toolbox) and I want to loop through them changing, for example, the enabled property of each to TRUE.
Secondly, I have some commandbuttons on a worksheet (added using the Forms toolbox). How would I loop through changing, say, the text on the buttons. I used the macro recorder to try to get an idea and got the following:
Sheet1.Shapes("button 15").Select
Selection.Characters.Text = "New Text"
Although this works, it is not very elegant, how can it be achieved without selecting the button each time, but rather by directly accessing the property.
View 3 Replies
View Related
Apr 23, 2008
I have a worksheet with 2 buttons labelled "Hide" and "Show". As the names imply, they allow the user to hide or show parts of the worksheet. I would like to combine them into one button and have the button label and the associated macro change with each press of the button. Here is what I have so far;
Sub SHOW_LEADS()
Rows("10:15").Select
Selection.EntireRow.Hidden = False
ActiveSheet.Shapes("Button 20").Select
Selection.Characters.Text = "HIDE LEADS"
Range("A1").Select 'is there a better way to remove the focus from the button than selecting a cell off the button?
End Sub
Sub HIDE_LEADS()
Rows("10:14").Select
Selection.EntireRow.Hidden = True
ActiveSheet.Shapes("Button 20").Select
Selection.Characters.Text = "SHOW LEADS"
Range("A1").Select
End Sub
These macros change the label fine after hiding or unhding the rows but I can't find the proper terms to use to change the macro associated with the button (if there is one?)
View 4 Replies
View Related
Jan 16, 2010
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
View 7 Replies
View Related
Jan 28, 2014
How to hide command button based on another cell?’ [URL] .....
This works faultlessly but for only 1 Button. I tried adding in the code again for a second Button but it creates a conflict. I made a slight adjustment to your original code, to show the button when the cell is populated, which works well…
[Code] .....
Any way I can:-
1. Add additional buttons which reference their own cell?
CommandButton4 – H9
CommandButton6 – I9
CommandButton2 – Q9
CommandButton3 – S9
2. And add one button which activates based on one of 3 cells?
CommandButton1 – J9 &/or V9
View 5 Replies
View Related
Jan 16, 2010
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
View 2 Replies
View Related
Nov 15, 2006
On creating a button to perform a macro, we are hiding columns.
Can the macro pick up that
If the columns E:J are hidden, then the text on the button to read 'Unhide'
If the columns E:J and unhidden, then text on the button to read 'Hide'
I am aware I can change what is written on the button via a macro, but can it see that the columns are hidden?
View 9 Replies
View Related
Mar 23, 2007
I have a problem with the changing the caption property of the option buttons to bold, italic and regular.
Is it some vb code you need to put in for the option buttons?
View 8 Replies
View Related
Jan 11, 2008
I'm a complete Excel and VBA newbie and would like to know if it's possible to change the output of OptionButtons from 'TRUE' or 'FALSE' to "1"/"2"/"3"/etc..
The name of each button is:
Rating 1
Rating 2
Rating 3
Rating 4
and so forth..
The idea is for each rating to output its assigned number such that if the user were to click "Rating 1", the result would be "1", "Rating 2" = 2 and so on. I'm trying to design a survey and these results will then be used to calculate an average rating. If this is possible, how would I need to write the code for it?
View 2 Replies
View Related
Jun 3, 2008
There is a 'Home' page with a button for each employee - clicking the button takes the user to the appropriate employee's timesheet
There is also an 'Add New Employee' button on the home page which brings up a form and allows a new employee to be added.
Each employee has only 1 worksheet (Which is created based on a blank template page)
When the 'Add New Employee' button is clicked a form pops up which ask for name, D.O.B etc. The user fills out the form and clicks ok. The template sheet is then copied, renamed to the employees name, and all relevent fields are added to the template sheet (based on the users input). A button is also generated on the home page with the employees name as a caption and when it is clicked it goes to employees timesheet.
I have almost got this working.
The only problem is this only works once, So For Example say i Add 'John' then i add 'Mary' on the home page i now have 2 buttons with 'John' and 'Mary' on them. The problem is as soon as a second employee is added (Mary), the first employees button(John) is linked to the second employee's Sheet rather than its own(Mary). and after the spreadsheet is closed the buttons dont work at all.
The link below has the spreadsheet i have made so far, you can test it out if my description doesnt make sense or you can see the code behind the 'add new employee' form:
############################################################
#### 'Add Employee' Button on Add New Employee Form ####
############################################################
Private Sub cmdadd_Click()
'check for Name
If Trim(Me.EmpName.Value) = "" Then ..............................
View 9 Replies
View Related
May 14, 2009
I want to create a button or a rectangle that has a macro attached. However I only want this button to show on the worksheet when for example A1 >=1.
View 8 Replies
View Related
Oct 8, 2009
I am creating a disclaimer in one of my sheets.
Cell I15 contains 'Are you a resident for tax purposes?' Cell N15 has the data validation list of Yes or No.
Then I have a button below which covers rows18, 19 and 20.
Is there a way I can have this button hidden until Cell N15 = Yes?
View 10 Replies
View Related
Jun 28, 2008
What i am trying to do is make a command button appear when you hit any cell of the row its on. For example, If you were to hit any cell on rows 1 or 2 the command button will appear and when I am not on the visible property goes back to false. I have a ton of buttons on this sheet and I am trying to clean it up so buttons only appear as needed.
View 9 Replies
View Related
Sep 23, 2009
I am trying to create a very large spreadsheet and i have got everything organized, but for easy viewing i want to have a toggle button that hides and un-hides certain sets of the columns (ie. Press down and it hides columns "B-F", "H-J", and "M-O".... then on depress it shows all the information again)
I have got some of the coding down, but am only able to get it to hide one set at a time, not all the sets. Can anyone help me out and let me know how i tell it to run multiple commands from the one press? here is the code i have already: ...
View 6 Replies
View Related
Sep 4, 2006
I have created a cover sheet with various command buttons linking into the available worksheets. I was wondering if it is possible to set the title of the command buttons by linking them to the text in a particular cell in each work sheet??
View 3 Replies
View Related
Jul 1, 2008
I currently upgrading some add-in to Excel 2007. This one concern a toolbar or Ribbon as they call it now. I am creating a toggle button using XML
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui">
<ribbon>
<tabs>
<tab id="rxTrading" label=" Trading" >
<group id="rxDownloadStockData" label="Download Stock Data" >
<button id="rxDownloadData" label="Download" onAction="rxDataStock_Download" />
<toggleButton id="rxEnableDisableDowwnload" label="Enable Download" />
</group>
</tab>
</tabs>
</ribbon>
</customUI>
How can I change the name of toggle button to "Disbale Download" after clicking on the toggle button? I am trying to find the answer on WROX Excel 200 VBA but I am lost.
View 2 Replies
View Related
Aug 22, 2014
In one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .
View 9 Replies
View Related
Apr 8, 2008
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies
View Related
Aug 24, 2006
Say you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
Sub Rename_click()
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
End With
Next i
End Sub
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
End With
Next i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
View 6 Replies
View Related
