The macro should...
1. Autofill dates from the Start Date ("D5") for x amount of years. Autofill begins in Range("C10")
2. Point out the THIRD 'wednesday' of every month with a "1" in column D.
3. Point out the second last 'weekday' of every month with a "1"in column E.
I want to automate the download process of these scan files we use. I can figure out how to do that if not for the two wildcards I'm about to throw out.
What I can't seem to figure out is how to use VBA to determine which files to import. I was thinking about possibly having VBA look for the time stamps on these files in the scan file directory, and then only import those ones which created in less than an hour from current time.
I have only a few days of VBA experience, so I don't have a clue where to start. If anyone could provide assistance/point me in the right direction.
By the way, the files that I am importing will be a comma delimited file. However, for some reason, the files are all extensionless (without .xxx)
I'm trying to solve where my calendar does not properly fill information from a table in another tab. I am using LOOKUPs but that only works for my first example. I have also attached a tab of ideally what I'd like it to look like.
I'm having trouble with the intial lookup and the subsequent lookups
where my calendar does not properly fill information from a table in another tab. I am using LOOKUPs but that only works for my first example. I have also attached a tab of ideally what I'd like it to look like.
I think the main problem is looking up the date within the table.
I have a workbook that will need data from another which will be located in the same directory. I need to open this workbook however the filename will be imported daily and be different each time (i.e. 010707.xls, 010807.xls, etc.) The only two files residing in the directory will be the active file and the one that needs to be opened. Is there a way to assign a variable for the 010707? Currently I have the following and need to manually modify the file name: Workbooks.Open Filename:="C:My Documents emplate10707.xls"
View 4 Replies View RelatedI have a phone list and I am trying to add a search box to it that when you type in the Employee name, it will return the value of the cell adjacent to the search result so the extension can show up.
I am a VBA Novice, but I have found plenty of code for the searching aspect of it. I am having trouble figuring out how to have the search occur and then return a different value then what was originally searched for.
Ideally I would like the msg box to show both the employee's full name and extension.
I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
I am working on automating our truck payment system. When the macro copies the data over to the output printout sheet, it will only copy the information once, even though there are 15 lines that it should be copied to. When I originally recorded the macro, I used the auto fill option to fill the information for all 15 lines. However, when I run the macro the auto fill doesn't work for me.
View 8 Replies View RelatedI currently have a worksheet that, using a Form Button, generates a new worksheet that formats column widths, titles and also creates a file list of all files on my hard-drive along with date created and the full file path.
Each file has all of its information in one row.
From the original button that initiates the whole process I need the code to create a delete button for each file in the list using, I presume, the kill function.
The delete button would need to sit in column 'L' starting in cell '5' and autofill down. The kill function would pull the file path of the file to kill from the full file path displayed in column 'K', again starting in cell '5'.
I already have the code to genereate the file information (path, date created etc). I literally just need the code for the creating the multiple form buttons and assigning the macro to each button.
code?
View 9 Replies View RelatedThe following code works fine for what I want to do. I want to have a range a5:g5 copied and pasted on down to g200 - as you would do if you selected and draged the selection box on down to paste it. The problem is I want to avoid the ".select".
What solution whould I use?
Worksheets("GTopLists").Range("A5:G5").Select
Selection.AutoFill Destination:=Range("A5:G200"), Type:=xlFillDefault
Using Excel 2007 Calendar Control:
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer
Insert
More Controls
Calendar Control 12.0
Problem: The following code autofills columns O:P beyond the last row of data in column H.
Range("O3:P3").AutoFill Destination:=Range("O3:P3" & Range("H" & Rows.Count).End(xlUp).Row)
I want to do is set up a macro to autofill into a new column every month. My data is linked to another excel document so that is where it is pulling the data from. Currently I have data in columns monthly from Dec 2001 until June 2008. I just want a macro that will automatically add in the next month, so in this case July then August the following month ect.
View 10 Replies View RelatedI have recorded a macro and it is working fine
My query is while the macro is running a column is inserted and numbers are autofilled
I need with the below statement. I need the statement to autofill columns b6:y6 down as long as there is data in column A6 down.
I am hitting a wall here
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 10/14/2011 by Oasis Group
'
' Keyboard Shortcut: Ctrl+Shift+B
'
Range("B6:Y6").Select
Selection.Copy
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("B6:Y" & Lastrow)
Range("B6:Y" & Lastrow).Select
End Sub
I have the following Calendar Macro. I want this to pop up when cell A5 is active vs assigning a Macro Button.
View 9 Replies View RelatedI have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1"
In cell B13 there is text "Data2"
In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
In a macro - how can you copy a cell and keep a data range absolute?
In the statement below, the range denoted by: DATA!RC[-52]:R[829]C[-52] is D2:D829. When I use the macro to Autofill using the following:
(Selection.AutoFill Destination:=Range("BG2:BG220"), Type:=xlFillDefault)
the range progresses. I need to have the range as an absolute.
Sheets("Report").Select
Range("BG2").Select
Selection.FormulaArray = _
"=SUM((DATA!RC[-52]:R[829]C[-52]=""APPOINTMENT"")*(DATA!RC[-55]:R[829]C[-55]>=Report!RC[-1])*(DATA!RC[-55]:R[829]C[-55]
I need a macro that can autofill irrespective of where the source cells are. Like, this is what I want to do:
Select two cells containing a descending order such as 50, 40. Hit the hotkey and the macro should autofill the same way as double clicking the bottom right corner of the selection.
The problem is that the two source cells can be anywhere in the sheet, and autofill range isn't fixed. Essentially, I just want a keyboard shortcut for Excel's own Autofill function.
I want this macro to be rid of the mouse when I'm working on excel (it really slows me down to use the mouse every time I want to autofill).
The issue: I have a macro to create a new wsheet with a tabname from a cell in a sheet called Data. The cell value (from Data), is a date which is inserted when a date is seleted from a popup calendar.This cell value then names the sheet tab and also appears in cell M1 in the sheet just created.
Now, when I select another date from the calendar (to create a new sheet), the macro works perfectly-(it creates and name the new sheet tab with the new date and copy the new date to M1 in same sheet)...but, any sheets previously created will now change all values in cell M1 to the most recent selected date but all tabnames remain correct?
What I want to do is be able to make a command on a range of cells. Every cell you would click would make a calendar box pop up. Then you select the date from the box and it enters the date into the cell. I found a easy way to go about doing this on a dropdown box but the boss didn't want that.
I have been trying to figure this out all morning.
Trying to write a macro so that my summary worksheet will auto populate when new sheets are added and filled out. I want the PO#, Quanity, Date ordered, Vendor, Subtotal, Tax and Total all to transfer from worksheets like F001 to the summary sheet. Yes there is only one F001 sheet filled out but that number will rise into the hundreds as the project progresses. No idea where to begin when writing this macro.
View 1 Replies View RelatedI am putting together a macro to import a CSV file onto excel. I will be manipulating columns of data (concatinating some, dividing by 100 etc.)
What I am having trouble with is that each file imported will have different number of rows.
I tried, in recording a macro, to use autofill (entered formula and double-click fill handle to drop the fourmula into each cell) hoping this would show me how to do it but alas, it just coded the range as the starting and stopping cells (didn't show a count formula or some such.
I'll do what I can to explain this mess I want to clear up...I have a series of excel reports I have to download and work thru daily and I need to see if there is a code to autofill down thru a column, based on multiple statements throughout the column..here goes:
f1 msp
f2 msp
f3 blank **
f4 mct
f5 mct
f6 mct
f7 blank **
f8 cci
f9 blank **
Regardless of the actual f cell, I always will need to fill the Blank ** cell w/ the values from the previous cell....Hope this makes sense...& thanks in advance....
have_a_cup@cox.net
I am using a great pop up calendar without ActiveX made by a guy called Phil Johnson. When you click a specified cell the calendar appears. The only problem is that the calendar doesn't default to today's date when it opens.
I have the original file Calendar source code if anyone needs it.
I finally managed to create my very own macro calendar BUT it does not fulfill the function that I need it to neither do I no whether it is able to at all.
Basically, I have created a form that I distribute to Line Managers to complete and one of the fields is the date so the first problem with me macro is that it only appears on my PC and secondly I cannot seem to embed it in my workbook as a button. Is this possible?
change format of date in UserForm textbox base on value in selected item of combobox.
View 7 Replies View RelatedI recorded one for an autofill series which basically came out as
View 4 Replies View Related1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
