Macro To Copy Cell
Feb 11, 2007All i want is for a selected cell and its contents to be divided by eight, that value pasted into the original selected cell as well as the next SEVEN cells to the immediate right.
View 6 RepliesAll i want is for a selected cell and its contents to be divided by eight, that value pasted into the original selected cell as well as the next SEVEN cells to the immediate right.
View 6 RepliesBasically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View Related Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
Is it possible to do a macro to copy a cell in excel and paste that cell in outlook and return to excel
How to write a VB macro to copy an existing formula from cell A1 to cell A2 and back again.
I want to have a macro button which will act as a toggle each time the button is clicked.
For example the data will either be in cell A1 or A2.
When the button is clicked once, I would like the macro to execute and determine whether the formula is contained in A1 or A2.
If it finds data in cell A1, I want the Macro to cut and paste it to cell A2.
On the second click of the button I want it to do the opposite. Effectively it's a toggle switch.
Macro to find blank cells in column I , wherever it finds a blank cells , cell value in column F adjacent to blank cell gets copied in column I ......
View 3 Replies View RelatedI have a database where the values in col C are = to N/A for some records.
I want to replace the N/A with the value in col F of the same record, then move on to the next record, etc. etc.
I dont now, but the code for copy info between sheets dont work
Sheets("SalGrpLibro"). Cells(1, 5).value = Sheets("Formato Permanentes").Cells(2, 2).value
and show error Range property. and this code is ok but is so many lines
Sheets("SalGrpLibro").Select
Cells(1, 5).Select
Selection.Copy
Sheets("Formato Permanentes").Select
Cells(2, 2).Select
selection.pastespecial
Basically lets say I have in cell A1 to A10 floor access data i.e. Users who used their ID cards to access a room.
Now the data always starts with either Rejected or Admitted then the user's name and then the card number and the access floor etc. the card currently has.
What I am looking for is that the macro should first check if the cell has Rejected or Admitted written in it - this I can do myself using =Left(A1,8) which should give me the helper column I need.
Then based on this I want it to only copy the name of the individual i.e. it should look in the cell and only copy whatever is written between "Rejected" and "(Card". The cell data is something like this:
Rejected Doe, John (Card #123456) at ABC 123 Floor1/Floor2/Floor3/Floor4 Door 1 [In] [Clearance]
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies View RelatedI want to make macro that copies values in a1 to a100 to cell c10 everytime I click enter.(first enter a1 to c10,second enter a2 to c10 and so on to the end of the list).
View 8 Replies View Relatedwrite a macro to copy a set of sentences in an Excel Cell.
Excel cell contains set of sentences under 2 categories.
OK Points:
* ----------
* ----------
* ----------
Improvement Points:
* ----------
* ----------
* ----------
I need to copy the sentences under the heading improvement points. Enclosed trial excel sheet for further ref.
I have a macro that will go through a set of numbers and check them against a condition. if the cell complies with the condition i want to copy the entire row to a new sheet. sofar I have tried the following to select the current row but to no avail.
View 4 Replies View RelatedI have a range that i need to run a report on regularly. This range has sporadic amounts of data in it. one time there may be 60 rows of data, next time there may be 250 rows of data. i want the macro to select and copy only the rows that have data in them.
i currently have a macro that i just set a range A25:A400 so it goes down and copies all these rows so it covers me .... but it is causing me problems by copying all those empty rows.
The macro will need to start at A25 and go down from there A26,A27 etc select and copy only rows that have data and stop. i need the data copied to a seperate sheet named "Combined Scoreboard" inputting at A25.
I have one excel file having two sheets viz "DailyRecd" and "MasterList". I need to copy some cell value from "Daily Recd" sheet to "MasterList" sheet using macro-function. A sample Excel file attached for easy reference.
View 2 Replies View Relatedfind a string and copy certian string to next cell i have tried something which can copy but unforunately that is copying whole cell not certian string.
I have data of 500 rows and i have data till A,B,C,D and E.Please ignore all the other rows which are of no use except E in Column E i just need Reference : A0000000:1 to be copied to next column beside to it that means in Column F.
I am trying to write a macro that is able to take a "Part ID" from a column on Sheet "Temp", search sheet "Parts" for that "Part ID" in Column A, copy the corresponding description (listed in next column B) and paste that description into a third sheet "Sheet1" Column D. I would then need to repeat for all lines in sheet "temp"
I could most likely use an IF statement to do the search, but I was hoping to use excel's search function to make it quicker as there are over 1000 parts. For example:
Dim partID = String
Selection.Find(What:= partID, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
What I am getting stuck on is once the search finds my text in Column A of Parts, how to copy the Description in Column B into Column D of "Sheet 1". A sample file is attached. The output in Column D of "Sheet 1" should say in this example:
Circle
Square
Circle
Rectangle
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
I want to find data from a certain point and paste this to a cell. My objective is to get all the data on too one row. This row is always 1 in col M called Run#. The find locations never change, just the data being copied always changes . Heres example,
In col K find FHBASC and look across to the right 3 cells in col N and copy.
Look in col M and find 1, paste above copied data into col GI.
Then move down rows to next FHBASC and repeat process until end of sheet.
If I can get a very basic simple macro to do this, then hopefully I can just re write to suit my other data.
- A database sheet called 'QAEQUIP' which contains information on the movements of pieces of equipment. This information in in order of Column A which is a movements reference number.
- A reporting sheet called 'Email sheet', which you put in a month and year and using macros it copy and pastes the relevant rows from the database and puts them in date order (e.g. put in October 2013 and it will show all of the equipment moves that happened in October 2013, and in date order).
What my end user would like, is to be able to add text to an extra column on the reporting page which gets fed into the database on the corresponding row. What would the best way to do this be? I was thinking VBA for each row (there aren't that many rows) that says if this cell is changed, copy and paste the cell into the corresponding row / column on 'QAEQUIP'.
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
I have a question.
What code do I need to make the data that is in more cells to be shown as data in one cell ?
ex. A5 D5 to be shown as D2(in a new workbook)
1 1 11
And that for every row?
Actually I do want to copy cell N589 from all files excel (sheet1) in c:database2014 to my workbook click run into the row C.
is there any of you can solve it?
I am working on getting a macro to find a name in column "B" and once found copy its row to another sheet. I have been working on an "IF" statement that checks for the given name and if true copies the row. I can not get it to keep checking and then stop using "loop" What i got so far:
View 2 Replies View RelatedI have a 'rota' worksheet that includes staff names and their rostered hours on all dates through the month.
On each date of the month I need excel to find that date in column A and then look across the row to find any cells that aren't blank. When the cell has a value I need the name above it in row 1 and the value (number of hours) itself to copy across to a 'daily activities' sheet. The date is autopopulating on this sheet in cell H5.
The name needs to drop into column A and the hours worked into column B. I would like the first cell to be A9 and then down from there with no spaces in between names. The other info on the sheet will then complete itself using the name that has been dropped in using VLookup.
I'm presuming I can use a macro to do this for me but am really struggling where to start with it, and how to ignore blank cells as they will change cells on a monthly basis.
I am continuing to struggle with my first attempt at a macro, and wonder if someone would mind taking a look to see where I have gone wrong? All I am trying to do is create file copying tool where the user can define the source and destination directory in workbook cells, and assign the macro to a button to complete the copy of all files from source to destination.
The macros do this:
Source and Location directory defined in Sub Archive1.
These are passed to file copy macro Sub ArchiveScript.
This macro checks for presence of destination directory, ensures that the directory backslash is in place, specfies the variables fn and fn2 to make sure the filecopy command copies all files in the directory, and then carries out the filecopy function itself.
However, I am getting two errors from the code that I can't figure out (I am still very much a beginner!)
- Invalid procedure call or element on fn = dir() at the bottom
- The copy still works, but only seems to copy one file from the source to the destination, and not all of them.
I need to repeat the following copy past macro the number of times equal to the value in column B and repeat the process for rows 3 through 27. It would end up being a loop with in a loop. The data in C3:H3 will be pasted onto the "Fixt#" sheet as many times as the value in column B3. The idea is to create an individual entry on the "Fixt#" sheet for each row on the "Totals" sheet.
Code:
Sub Create_Fixt_SheetI()
'
' Create_Fixt_Sheet Macro
'
'
Range("C3:H3").Select
Selection.Copy
Sheets("Fixt#").Select
ActiveSheet.Range("B" & Rows.Count).End(xlUp).Offset(1).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
I am trying to modify the macro listed below for the following example. It would work when I have only numerals in the cell but this new query, the cell has both letters and numbers.
I want to compare column "M" from worksheet one to column "B" in worksheet two. If the information matches, then copy the value adjacent from worksheet two column "A" to worksheet one column "L".
Here is the macro that worked for me using a search of only numerals.
figuring out why the data doesn't copy?
Macro:
Sub merge_accession_PS_rad_productivity()
Dim rng2 As Range, c2 As Range, cfind As Range
Dim x, y
With Worksheets("Imaging_Summary")
'N4=Accession on Imaging Summary worksheet
[Code]....