Macro To Copy Value From Adjacent Cell?
Jul 14, 2012Macro to find blank cells in column I , wherever it finds a blank cells , cell value in column F adjacent to blank cell gets copied in column I ......
View 3 Replies
ADVERTISEMENT
Macro To Copy Data From One Cell To Another If Adjacent Cell Meets Certain Requirements?
Feb 19, 2014Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
Macro - If Adjacent Cell Contains Any Data Then Copy Data From Another Cell?
Jul 15, 2014I wondering if it is possible for a macro to recognise whether or not there is text in an adjacent cell, and if there is, then to copy data from another adjacent cell.
For example, because there is data in C2, data from A2 has been inputted into B2. And any blank cells are left alone.
a
b
c
d
e
ref1
(cell A2 data here)
DATA
DATA
DATA
ref1
Excel 2010 :: Macro To Copy Two Adjacent Cells Every 7th Row
Mar 15, 2014I need to copy two adjacent cells down every 7 rows in the same column.
Would do it manually but have some 4000 rows.
Copy Non-adjacent Cells In A Row From One Spreadsheet To Adjacent Rows In Another
Jan 5, 2014I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
Copy Cell Values In One Cell Based On Value Of Adjacent Cells
Feb 20, 2014What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
Find Cell, Copy Adjacent Cell Or Cells To Clipboard
Jun 14, 2007Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
Find Value, Copy Adjacent Cell & Paste To Corresponding Cell Of Another Found Value
Apr 5, 2008I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedCopy & Paste Values In Adjacent Cell
Dec 5, 2009i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
Copy Fill Color Of Adjacent Cell
Oct 22, 2013I am setting up a schedule maker for a coworker, in which I have divided two columns into time in and time out for each day of the week. My coworker wants the cell to be highlighted red if the shift is a night shift (Begins after 4), and I used conditional formatting to set up both columns independently to evaluate if the value of their content is after 4 PM. However, this means if a shift starts at noon, but ends after 4, only the time out cell will be highlighted red, not a huge issue but it isn't aesthetically pleasing.
View 3 Replies View RelatedCopy Active Cell Down Adjacent Range To Right
Apr 17, 2009Split from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies View RelatedIf Cell Contains Any Value Greater Than 1 - How To Copy It / Adjacent Cells And Put Into New Sheet
Nov 14, 2013I have a sheet that I populate with data, and I would like to create a formula (or some code) that will look down column A, and if any of the cells contain a value >1 copy the cell and the adjacent cell (column B) and paste both values into a new sheet.
View 2 Replies View RelatedCopy Data From Another Sheet If Adjacent Cell Meet Criteria
Aug 13, 2008I have a have excel problem Im trying to figure out. I have 2 sheets. Sheet1 and Sheet2. I want to copy into sheet1 cell B2 the contents of sheet2 column C row x iff sheet2 column B row x = 1. There will be only one cell in that column equal to 1, so I will be copying that cells(colB; rowx) adjacent cell (colC;rowx) contents. This is what I have so far but it doesnt work. =IF('Sheet2'!B:B=1,DONTKNOW WHAT TO PUT,""))
View 5 Replies View RelatedMacro That Will Clear Contents Of Cell Based On Format Of Text In Adjacent Cell
Feb 18, 2009Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedFind Cell Value Copy Cell And Adjacent Cell
Aug 1, 2007i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies View RelatedVBA Macro To Move Data To Adjacent Cell
Mar 26, 2013writing a Macro which will move data from a cell to an adjacent cell.
E.g Column B has only data in certain cells, I would like the Macro to work down the column and every time it encounters data in Column B to move it into the adjacent cell into Column A.
Macro Delete Row Based On Color And Adjacent Cell?
Mar 28, 2014i am looking macro formula to delete row with 2 criteria :
- delete rows if yellow color background and based on adjacent cell (blank cell), otherwise keep rows when adjacent cell not blank
Using FIND Function In Macro To Replace Value In Adjacent Cell?
Aug 10, 2012I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2()
'
'Range("A1").Select 'Start from the home cell
Dim ValueFound As Object
Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS")
If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If
NotFound:
End Sub
Macro - Fill Formula Down Until Adjacent Cell Contains String
Jul 17, 2014I've created the following Macro based on some of the posts on this great forum! It works great, but I'd like to tweak it for another purpose where it would fill the formula down until a cell in column AF had the value "#N/A" or stopped having the value "clean". The #N/A is from a formula result so I'm not sure if or how the Macro would treat this.
Code:
Sub Y_CleanUp3()
'
' Clean Up Bad Data Macro 3
Dim LR As Integer
Range("AH2").Formula = "=VLOOKUP(X2,'[Territory by Zip Code.xlsx]Sheet1'!$A$2:$B$135000,2,TRUE)"
LR = Range("AF" & Rows.Count).End(xlUp).Row
Range("AH2").AutoFill Destination:=Range("AH2:AH" & LR), Type:=xlFillDefault
With Range("AH2:AH" & LR)
End With
End Sub
Macro To Populate Cells With Formula Based On Adjacent Cell?
Mar 31, 2014I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedVBA Macro To Select Cells With Certain Value And Perform Action On Adjacent Cell
Mar 10, 2014Converting old reports to usable excel format. I am having trouble using VBA to set up a looping macro that would search Column A for cells with the text string: "ACTIVITY TOTAL". If cell has that value I would like to perform text to column action on the adjacent cell (R0C1). The macro recording for the test to column settings i need is :
Selection.TextToColumns Destination:=ActiveCell, DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=False, _
Semicolon:=False, Comma:=False, Space:=True, Other:=False, OtherChar _
:=":", FieldInfo:=Array(Array(1, 1), Array(2, 1), Array(3, 1), Array(4, 1), Array(5, _
1), Array(6, 1), Array(7, 1)), TrailingMinusNumbers:=True
I have attached a sample of what I am currently working with. The actual file has roughly 6000 lines of data, so I would like the macro to go through all lines.
Attached File : LoopingVBA.xlsx‎
Copy Any Bold Text Within Cell Text String To Adjacent Cell?
Jul 31, 2014Here's an interesting one:
A1 contains a text string which is both bold and unbold (
B1 is blank
I need a macro which scans the cells with text and copies the BOLD portions of the text string into the adjacent cell.
Example:
A1
The sky is blue
Macro is run
B1
sky blue
Copy/Paste Cell To Named Range Named In Adjacent Cell
Sep 4, 2007I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
Copy Non-adjacent Columns At The Same Time
Mar 10, 2008I am using this code to copy the cells from column C for the selected rows.
With Selection
.Columns("C").Copy
End With
How can I copy the corresponding cells in column "E" at the same time ? I think I need to use "Intersect" somehow ?
Copy And Paste From Adjacent Cells.
Oct 27, 2008I have following data in Sheet1
A1B1C1D1E1F1G1H1
5812643 1517
Now I want that the above values be pasted in 02 columns of Sheet2 as under:-
SHEET2
AB
58
126
43
1517
What Formula should I put in Cell A1 and A2 of Sheet2 to get the
desired result automatically.
Lookup Value And Copy Adjacent Range
Jan 11, 2010I have three columns (A to C) with contineous data (# rows always variable).
I would manually type a number in a cell (S2) that would correspond with a number in Column A. What I would like the code to do is that it finds the number in column A and selects the whole range in column B and C starting from that row, and copies that whole selection to N10.
After that all the data in column N should be substracted with a value given in S3 and all data in column O with a value given in S4.
Copy Non-Adjacent Cells But Maintain Spaces
Aug 12, 2013I want to copy A1 and C1 (there is data in A2), but when I copy it somewhere else, I want it to maintain the column space with NO data. Can I do this?
View 1 Replies View RelatedCopy And Paste Comment On The Adjacent Cells
Aug 26, 2013A sheet, compose of groups of 9 items and their corresponding qty. I need to have the same serial no. be commented on each items of the same group. I am doing in this mechanical way:
1. add comment of serial no. on the first item of group,
2. copy and paste, with paste special>>comments, on the remaining items of the same group,
3. Repeat this sequences on the other groups, which means hundreds.
Other than these tedious procedures, is there any better way?
Locate Word In Column And Copy Adjacent Range
May 16, 2012I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
Copy Cells To Adjacent Column, Removing Blanks
Dec 8, 2009In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
http://www.excelforum.com/excel-work...om-a-list.html
Columns A:H in the same worksheet are populated and unavailable for use.
