Can someone confirm that the Microsoft Self Certification (digital signature) for VBA in Excel would not solve the problem of the prompt screen. In other words, unless the user has selected your profile as acceptable, the prompt screen will still appear? To not get the prompt screen, I have to get it appoved by Verisign, but they are not free.
View 9 RepliesI created a Self Certificate for one of my macros. I have a previous macro for which I want to assign the Self Certificate.
View 9 Replies View RelatedI have a workbook that is on a share drive. Me and two other users modify the content of this sheet on a daily basis. We don't want to have to click "enable macros" each time we open the workbook. I digitally signed it. Then I went to Becky's office and had her install my certificate. She did, then we made some changes and it gave her this message, "You have modified a signed project. You do not have the correct key to sign this project the signature will be discarded."
View 5 Replies View RelatedI'm trying to apply the digital signature automatically to excel files(.xls,.xlt)(from Excel VBA editor-->Tools-->digital signature--->Apply signature(i need to apply this settings through code)).
scenarios:
1. I could apply digital signature for .exe,.dll,.cab files through VB6 code(using capicom dll) and also i can achieve this to Word document by using signature object.But this object not supporting in Excel.
2. I tried also like this, Recrod a macro--->Apply digital signature from VBA Editor (tools-->digital Signature) but no code has been generated.Again i tried this in another way like, Record macro-->Tools(from Excel)-->Options-->Security-->Digital Signatures--->Add.but here also i couldn't achieve this.
3. i tried using Application object like executing menus through code(Application. commandbars("Tools").controls("Options").controls("security")) here also i strucked up.
I've verisign digital certificate with pfx file.....
I tried to add signature code in a macro to send a mail from outlook but failed.
Add signature code in below code.
Signature Code Link.
I've digitally signed a macro in Excel, where I'm sending mail from using outlook, but I can't seem to get Outlook to recognise the certificate in outlook, even though both programs have my name as a trusted publisher...... so still getting the "A program is automatically trying to send mail on your behalf" Pop up.
How to get outlook to recognise the certificate on the macro that I'm running from excel?
The main issue being it is sending roughly 50 separate emails, and to wait five seconds and manually have to click 'yes' for each one is not really desirable!
I have a the following macro that looks through a range of cells and generates emails based on the date. The macro generates the email but does not insert my signature line.
[Code] .....
way to put multiple digital signatures on an excel spread sheet. Like, routing a spread sheet for approval.
View 9 Replies View RelatedI want to add digital certificate in my XL2000 file. i created self certificate and add in the file but when i save that file give me a following error
" There was a Problem with digital certificate. VBA Could not be signed. The signature will be discarded."
I want to add Digital Certificate or sign in my file.
I have a spreadsheet with macro's in and everytime the user opens it that annoying security box opens and asks to allow/disable macro's. I believe it is due to a digital certificate. How to i obtain one, and if i do get one will it stop thie popup occuring for other users on different computers or just me????
View 2 Replies View RelatedI am using a macro to send mass mails to my clients attaching a file to each
my code is like this:
Sub Mail_Cust()
Dim OutApp As Object
Dim OutMail As Object
Dim EmailSubject As String
Dim EmailSendTo As String
Dim MailBody As String
Path = "Y:CustomersStatements of Accounts20111102"
[Code] ........
Now my prob is when the macro goes for a new mail with attachments and mail body and all... it misses my outlook signature. If i am creating a new mail signature appears. but when i run from macro my signature is missing...
I am looking to eliminate an old process of having to use paper with a log sheet just because a signature is required. I have already created the spreadsheet, but I am now looking to find what secondary device I could use to insert a signature. This log is used daily with three signatures per worksheet.
View 2 Replies View RelatedI need to input signatures into cells automatically when a date is inputed into an adjecent cell. I have a scanned copy of a signature but because when u insert image it doesn't put it into a cell I can't just put =a1 as a1 is still empty.
View 14 Replies View RelatedIs there a way to include my Outlook email signature when using the following macro to send an email?
Code:
Sub EmailReport()
Dim OutApp As Object
Dim OutMail As Object
[Code].....
I have QC checklist with a cell at the bottom for the user's initials. We have 8 users, and I would like to create a way that each user can enter their pin and have their initials come up in the cell. Ideally, there would be no way to the other users to know each other's pins or find out in the spreadsheet. Do you think it is do-able using VBA and how they would approach this?
View 1 Replies View RelatedI have a macro which has a digital certificate. When the macro runs i want to somehow readin the expiration date of the certificate and make sure its still valid before running the macro.
View 6 Replies View RelatedAny ways to automatically send emails using Lotus Notes.
On Lotus Notes, I automatically have my signature to append to an email, however when I am running Johns script at the bottom it is replaced with the file path of my signature (i.e. C:Program Fileslotus
otesdatasig.htm), and when I comment out the part where strSignature is mentioned there is no signature.
My code is below:
Sub mySub()
Dim x As Integer
Dim UserName As String
Dim MailDbName As String
Dim Recipient As Variant
Dim Maildb As Object
Dim MailDoc As Object
[Code] ...........
I would like to use Excel as a measurement device. I have an inexpensive digital microscope that will store sequentially numbered pictures at the click of a button. I am then going to import the most recent picture into Excel and place a grid of transparent rectangles over the picture to serve as my ruler. Would it be possible to continuous update the Excel workbook with the output from the digital microscope?
View 7 Replies View RelatedTo search the users signature folder for Microsoft Outlook see if the have any .htm files, if so list them in a message
Make the print find the default printer work out if it is black and white or colour and find the nearest opposite printer. i.e. if default is colour find nearest black and white
Protect a sheet but allow tabbing from certain cells to others.
Enable the users to use the workbook without having to rely on their macro settings being Low.
I have an excel file connected to a digital reader. Values are inputted to cells. What I can't figure out is the formula to automatically insert the values into the desired cells.
In short. First value goes to A1, 2nd value goes to B1. There's a formula (=A1-B1) in C1. The 3rd value from the reader should go to A2. The 4th value to B2. The 5th value to A3 and so on. I believe that I should be putting a formula into B1,2,3..n. What I can't figure out is that formula.
I'm creating an excel file that can email itself inside the body of a HTML in Outlook. I have found some code from the web and have re-fitted it so that I may use it for my purpose. My main issue is this: I cannot keep my default Outlook signature on the email when it gets sent.
View 3 Replies View RelatedI am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I also tried this code.
[Code] .....
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define:
Select File Extension
Select Folder to Search
Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.
Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.
Is there a way to do this?
I've attached the file for you to see.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub