When I open a csv file directly ie file/open, all dates are formatted correctly.
When I open the file as part of a macro
Workbooks.Open Filename:="Y:DCPRODN_OEE_Extract.csv_D.csv"
the date format is corrupted for the 1st to the 9th of the month? See attachments, Note the format of the date should be day/month/year
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedWe have an Excel file that 20+ Users update daily. Every time we share the workbook, it corrupts the file within days.
We are using Excel 2010. We go to Review tab, Share Workbook, and check the Allow Changes box.
Below is a macro which i got from another thread.
Sub foo()
Select Case Weekday(Date, vbMonday)
Case 1: Range("B3").Value = Date - 3
Case Else: Range("B3").Value = Date - 1
End Select
End Sub
change the date format as mm-dd-yyyy.
I have an excel dataset and I have dates entered differently. For example they could be written as:
MM/DD/YY
MM/DD/YYYY
M/D/YY
M/D/YYYY
....
....
Ultimately what I am interested in doing is writing a macro (and saving it in its own file) that can be run on any excel spreadsheet that will change the dates to be formatted the same: MM/DD/YYYY
The issue is that a date written as 10/10/27 would need to be changed to 10/10/1927 (so adding the 19).
I would need a macro what would change this format (15 Jun 2009) in cell B2 to 2009.06.15.
View 5 Replies View RelatedI have dates in Col E that are in mm/dd/yyy. I would like a macro to convert these in the format dd/mm/yyyy.
View 9 Replies View RelatedI'm trying to make a macro to replace dates with a certain value with blanks, but it dosn't seem to work.
Here's my code:
Sub Datetoblank()
'
' Datetoblank Macro
'
'
Cells.Replace What:="2014-05-08 15:09:25", Replacement:="", LookAt:= _
xlWhole, SearchOrder:=xlByRows, MatchCase:=True, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
In the attached sheet, one macro is developed which is not working properly. My req is to convert date from dd-mon-yyyy to yyyy/mm/dd format. (23-jan-2010--> 2010/01/23)
If incomplete date is there, then hyphen should place the gap i.e.
For date like APR-2014------> Output should be 2014/04/--
For date like 1998 -----> Output should be 1998/--/--
The below macro works only for row number 11, 15 and 16.
[Code]....
Attached File : date.xlsm
I'm exporting a csv file from a membership database with the attendance of members. With a macro i open the file and copy the contend to excel. With the macro the column for the date has *randomly* wrong formats. Example the date in column B:
Aasia Tallah19-03-2009 19:33
Aasia Tallah17/03/09 7:49 pm
Aasia Tallah15/03/09 7:53 pm
Aasia Tallah14/03/09 6:34 pm
Aasia Tallah03-12-2009 20:05
Aasia Tallah03-11-2009 19:56
Aasia Tallah03-10-2009 19:54
I try to change the format of the column, but that does not work. Rows 2,3 and 4 seem to be text but they are not. If i access the edit bar for example the 17th of march and store without changing anything, it changes to the format of the first row. That is how i want it. If i copy the column by hand, every thing is fine.
All of the following i tryed:
- format date column of the csv before copying... failed
- copy special with only pasting values... failed
- preformat the column i paste the date to... failed
- delete the sheet i paste to and create a new one... failed
- copy the macro to a new workbook... failed
I think there's a way to use Excel to automatically create a 5-day calendar. Maybe a macro?
The date format must be dd/mm/yyyy hh:mm and it must be in text format. If its June 9, 2012 at 6pm - the correct format is: 12/06/2012 18:00
I want to post 5 times a day: 09:05, 9:55, 10:45, 16:55 and 18:00.
Column A is where the date and time goes. Ideally, I'd enter in A1 the start date and then run a macro that would automatically populate the next 5 consecutive days with the specific times above (so 25 rows total in column A).
I have to save the file as a csv file, so the date and time format has to be in text or I'll get an upload error in Hootsuite.
I need to place a date and time in a cell 14/9/2013 6:00 PM
Tried several formats under custom format without success.
Also need addition to following macro to enable it to start on opening of workbook
Code:
Sub Macro1()
Do
PauseTime = 1 ' Set duration.
Start = Timer ' Set start time.
Do While Timer < Start + PauseTime
DoEvents ' Yield to other processes.
[Code]...
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedI have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I have a long list of dates that are fomatted as 3-12-13 that I want to format under custom date as d-mmm-yy : 12-Mar-13. I tried to do this but it does not change. I tried to change it to a number and that didn't work either.
View 2 Replies View RelatedExample......
In D2 I have: =B2
In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
How we can convert any data which is in General format in to date format.For ex I've:
19/03/2012 14:57 (General format)
I want the output/result
19-Mar
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
I have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
I have been struggling with my Excel 07 Date format. Nearly every time I perform a calculation, enter in a value etc in a spreadsheet my answer is returned as a date. So for example if I enter in a cell: = 5 - 4. I get the answer "1-Jan-1900" instead of 1. I have to manually set the formats to general or number if I want the correct format. The setting seems to be the default one and occurs for all workbooks I open. What can I do to change this.
View 5 Replies View RelatedIn one excel file, i have a date , and i set this to "dd/mm/yy hh::mm am/pm" format. From another file i will open this file and i need to copy that date to this file. My question is , before copying i need to check it is in the "dd/mm/yy hh::mm am/pm" format using vba.
View 9 Replies View RelatedI would like to format my cells containg date from any format to the format dd-mm-yy. I was doing this manually with the below function
=TEXT(YEAR(Q2),0)&"-"&(RIGHT("0"&TEXT(MONTH(Q2),0),2))&"-"&(RIGHT("0"&TEXT(DAY(Q2),0),2)).
I would like to automate this using vba. i tried a bit but doesn't get what i want. ultimately i want the date in text(dd-mm-yy) format.