# Macro For AverageIFS With Multiple Criteria In Same Criteria Range

May 18, 2014Macro for AverageIFS, with multiple criteria in the same criteria range....

View 9 RepliesMacro for AverageIFS, with multiple criteria in the same criteria range....

View 9 RepliesADVERTISEMENT

So I have 3 columns in this example. I want to average column K if certain criteria are met in Columns G & I.

Columns G & I have text values and Column K is a number value.

Does that make sense?

If I'm simply counting how many meet both criteria, I have this: =COUNTIFS(Data!I2:I282,"Waiting",Data!G2:G282,"Sev1")

but I want to now take those and average the values for Column K.

I'm trying to use AVERAGEIFS to take the average of the values in a column that are > a low cutoff value and < a high cutoff value.

In my sheet, the cutoff values are calculated in two cells, and I need to refer to those values in my AVERAGEIFS formula.

Here's what I've tried so far:

=AVERAGEIFS(H2:H81,H2:H81,">B10",H2:H81,"<B11")

This gives me a #DIV/0! error.

If I replace the cell references in the criteria clauses (">B10" and "<B11") I get the correct answer, so I guess it's not handling these sections correctly.

I have 3 columns of information. Column A will be between 1-6, Column B is between 1-10, Column C is the results that I need averaged. I need the formula to give me the average of Column C of all 1's in Column B that are even numbers in Column A. I have been looking on forums, and can find multiple criteria for ands, but can't see where I can do an and /or. I could do Column B = 1, Column A =2, but I need it to be OR =4 OR =6. I don't see any easy answer in excel for even/odds.

View 8 Replies View RelatedI've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.

View 1 Replies View RelatedI have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.

I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.

Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.

I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.

=Sumproduct(sumifs(sumrange,criteria range1,criteria1,criteria range2,criteria2))

criteria 2 = can be a range.

if I want the criteria 1 also can be a range. isn't possible??

Eg(ok);

=sumproduct(sumifs($A$1:$A$100,$B$1:$B$100,D1,$C$1:$C$100,$E$1:$E$33))

Eg(how to let excel function tis)

=sumproduct(sumifs($A$1:$A$100,$B$1:$B$100,$D$1:$D$33,$C$1:$C$100,$E$1:$E$33)

I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.

I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -

=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))

But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!

I am trying to do a sumif function where it only sums when a different criteria is met in several different columns.

eg

sumif b:b shows portsmouth d:d shows calais f:f shows night then sum range g:g

I need to add all cells within multiple ranges where the characters "A", "S" and "D" occur.

=SUMPRODUCT(COUNTIF(INDIRECT({"C22:C25","C28:C32"}),{"A","S","D"}))

I am trying to make an "intelligent" auto filter that with filter with increasing restriction until a certain criteria is met.

The list runs from A5:G20. In coloumn G is the number of hours associated with each event. And in A1 I have the percentage of items showing/whole list so it I have 15 rows on the list, and I filter so that only 5 are showing, cell a1=33%

How can I make a macro that will autofilter until the the a1=5%

Like having filter criter = equal or greater then 1 hour,

if a1 > 5%

Then criteria + 1 hour

If A1=<5%, then stop.

basically a seed criteria of 1 hour, adding 1 hour until the value in a1 = 5%

i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)

I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}

I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message

Function

Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)

Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)

-Didnt get thru this bit to start building on the Function! keep giving me #Value!

I have two ranges of data and want to count the unique number of times the values in column A occur if they have two values in column B. For Example:

ColA ColB

333310143333306344441014444430635555161246666101466661612466663063

I want to count the number of times value in ColA has the value 1014 AND 3063. My intention is to create a table that cross references the two

10143063161241014331306333116124112

I searched and found answers where multi criteria were in multi columns but I can't seem to find a solution to this means of find the unique count in ColA.

The part in green will count the number of entries for the name Johnson & Freedman LLC perfectly fine. However when i add the last part in red i receive a #Value! error.

Col. W is formatted as General and has a data validation for the user only to choose Pass or Fail.

Not sure why it isn't working.

Code:

=SUMPRODUCT(--( 'SCRA'!B26:B29>=Sheet3!C2),--('SCRA'!B26:B29

I'm working on a formula for calculating shipment weight per city it goes to per weight scale of the shipment pricelist. Although we have 4 customers with customer codes which we ship with our own trucks and some customers pick up there goods.

Therefore, my sumifs formula currently looks like this:

=SUM(SUMIFS('Freight SH 13'!$R$7:$R$14176,'Freight SH 13'!$R$7:$R$14176,"

I posted this on Mr Excel, but did not get an answer. I hope someone here can help.

I have a rather large financial worksheet that I am trying to extract some specific data from.

The sheet contains budget and expense #'s for the fiscal year for several projects. The project names are listed in column G and the same project can be on multiple lines, depending on what the expense is. Column J contains either "Cap" for Capital, or "Exp" for Expense. The monthly data starts at Row L. Each month has 6 columns, the one that matters for this scenereo is the 5th one for each month, which is the Forecast Column.

Our Fiscal Year is April 1 - March 31, but this sheet ruins from March - March so that we can carry over anything from the previous year. So the forecast column for March is column "P", April is column "V" and so on, adding 6 columns for each month.......

With me so far?

What I am trying to do is get the total forecasted expenses amount for a specific project for the remainder of the fiscal year.

In other words I need to look for a specific Project Code in Row G, look for "Exp" in Row J, Then get only the numbers that are in the Forecasted Column for months in the future and add them all up.

Just in case that is not totaly clear----

criteria to meet

Column G = "Project Code"

Column J = "Exp"

Row 2 > this month

Row 3 = Forecast.......................

I am trying to solve a problem. I am currently using this formula

= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)

This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.

So the info looks like this in excel

MARKETING 200612 -10

MARKETING 200701 -25

MARKETING 200708 -50

ECONOMICS 200709 -30

The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.

i have my "raw data" and in my "summary" sheet, i want to show the data by the data that is filter in range D15:D21

Essentially, when the user filters the data from cell D15, i want the the macro to paste the data row D27 down/across from the "raw data" table. in addition, i am not sure how to create dependent drop down.

for example, in cell D15 it shows "segment"; in the cell below, D16 (tyre size), i want it to list all tyre sizes within that selected "segment"; when i want D17, to show "speed index" for by segment and tyre size etc.

in the table, i want the macro to show the data based on what the user filters from above. i can then do my calculations but getting this to work is the tricky part.

I would like to write a macro that would accomplish the following:

Check (b2..b65k) <> 6710 or 6720

ActiveCell "6400"

Loop

In words. I would like to check for each type account numbers in the cell to the right, if neither occur, then in the activecell write 6400.

I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant.

View 9 Replies View RelatedI'm trying to create a formula that will lookup multiple criteria within a table, however the problem I am having is that one of the criteria needs to fall within a certain a date range. I've used index & match to look up the dates when they match exactly, but how to return the same value for when they fall within a date.

I have attached the spreadsheet - Date Range.xlsx! The requirement is to get the correct "pay" from the "Contingent Workers" sheet to the Timesheet sheet. So it will match the Employee ID, but also the date on the Timesheet tab will fall between/or be the exact date indicated on the contingent workers tab.

How to use countif in Excel 2003, for multiple range and criteria ? Can 'Nested ifs' be used? If so, a sample of such ifs

View 3 Replies View RelatedI'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.

View 4 Replies View RelatedI have the following table

Team>

Team A

Team A

[Code].....

I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere

April

May

Team A

6

1

Team B

11

1

I know need to modify the formula to include validating if the indexed reference occurs within a certain month.

{=INDEX('Duration Calculations'!B$2:B$5000,SMALL(IF(MONTH('Duration Calculations'!$J$2:$J$5000=10),IF(ISNUMBER(SEARCH("br",'Duration Calculations'!$A$2:$A$5000)),ROW('Duration Calculations'!$J$2:$J$5000)-ROW('Duration Calculations'!$J$2)+1)),ROWS(P$100:P101)))}

Essentially, what I am trying to do is index the value from B column if it meets the following criteria

1) Date in column J is equal to any date that occurs in October

2) the Column A has a text value equal to "br"

If both true then I need to index the value in column B.

The formula as states works finding any value equal to "br" but seems to be ignoring the date range.

I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant. I have attached my sample spreadsheet.

View 7 Replies View Relatedhow they can be used to delete rows that meet multiple criteria, however all the examples I have found seem to be rather complex and personal to the individuals as opposed to being rather generic. Many people, including myself would find it useful to have a simplified generic answer that can be applied to all kinds of criteria. Such as if the data in column B = x and the data in column C = y delete the row. Here is my example.

SCENARIO EXAMPLE:

In column A - Date e.g. 05/02/2011, 06/02/2011

In column B - Day

In column C - Time (in format 09:06:21)

In column D – Service numbers dialled (70, 110, 224) two to three digits long

MACRO EXAMPLE:

Delete the row if the criteria in:

Column D = 10, 40, 192 or 244

And

Column C is between 09:00:00 and 16:00:00

macro code or at least a link to a thread that they think gives a scenario as simple as this.

I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.

The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.

i.e. so the finish result looks something like this:

I have a table of data with which I need a macro to clear a range of data based on certain criteria. I have attached a file as an example. In this example the current period is 6. I therefore need to clear columns which have a period of 7 or higher.

Essentially, if the current period is x, then clear the range in the period columns if the period is greater than x.

A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.

Extract Rec1.xlsx

Copyrights 2005-15 www.BigResource.com, All rights reserved