Averageifs Using Cell Reference In Criteria
Nov 21, 2013
I'm trying to use AVERAGEIFS to take the average of the values in a column that are > a low cutoff value and < a high cutoff value.
In my sheet, the cutoff values are calculated in two cells, and I need to refer to those values in my AVERAGEIFS formula.
Here's what I've tried so far:
=AVERAGEIFS(H2:H81,H2:H81,">B10",H2:H81,"<B11")
This gives me a #DIV/0! error.
If I replace the cell references in the criteria clauses (">B10" and "<B11") I get the correct answer, so I guess it's not handling these sections correctly.
View 7 Replies
ADVERTISEMENT
May 18, 2014
Macro for AverageIFS, with multiple criteria in the same criteria range....
View 9 Replies
View Related
Feb 5, 2014
So I have 3 columns in this example. I want to average column K if certain criteria are met in Columns G & I.
Columns G & I have text values and Column K is a number value.
Does that make sense?
If I'm simply counting how many meet both criteria, I have this: =COUNTIFS(Data!I2:I282,"Waiting",Data!G2:G282,"Sev1")
but I want to now take those and average the values for Column K.
View 2 Replies
View Related
Feb 7, 2014
I have 3 columns of information. Column A will be between 1-6, Column B is between 1-10, Column C is the results that I need averaged. I need the formula to give me the average of Column C of all 1's in Column B that are even numbers in Column A. I have been looking on forums, and can find multiple criteria for ands, but can't see where I can do an and /or. I could do Column B = 1, Column A =2, but I need it to be OR =4 OR =6. I don't see any easy answer in excel for even/odds.
View 8 Replies
View Related
Apr 12, 2006
SUMIF allows one to enter a [valid] criteria text string into cell D2, say
">14000", and then reference D2 as the function criteria, e.g.,
=SUMIF(B5:B10,D2,C5:C10).
Is there a syntax that SUMPRODUCT will accept that does the same thing? Note the inclusion of a comparison operator is important.
View 9 Replies
View Related
Jun 5, 2007
In reference to an earlier thread, which shg and ByTheCringe2 both were genereous in their assistance, I would like to add a wrinkle, as requested by the end-users.
how to reference an earlier thread for people to reference but you can search " Sumproduct By Last (criteria) Month With Data". Edit by ByTheCringe2: Sumproduct By Last (criteria) Month With Data.
We had used the MAX function to find the most recent investments, per counselor, per bank. I now need to find the most recent investments as of a certain date (month-end perhaps). I have ideas, but I'm afraid my misperceptions/assumptions might hinder me from seeing all available options. Initially, I thought I could use a text or listbox on the summary sheet to enter a date that would link to the reference cell on the data page, and this reference cell would then be used in whichever formula I came up with.
View 4 Replies
View Related
Jan 7, 2010
See attached a sample from a larger workbook I am working on. What i would like to do is in the Rec tab column G, keep the references from columns L & M as the Table Array and Column Index Number. I have =VLOOKUP(F:F,L:L,M:M,0), I would like to have =VLOOKUP(F:F,whatever tab reference is in column L as table array,whatever number is in column M as index number,0). I have included what I would like the data to look like in coulmn H.
View 2 Replies
View Related
Sep 26, 2013
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
View 8 Replies
View Related
Apr 2, 2014
I have data that is organized in a table and has many columns that I'm interested in calculating their averages. The first two columns contain the criteria range; say DATE and NAME.
So I want to generated several report where every column of the data table corresponds one report. The report template is organized such that NAMES are on the rows and DATES are on the columns. I used to highlight the body of the report and write a formula such as:
AVERAGEIFS(Table1[Success Rate],Table1[NAME],$A8,Table1[Date],E$1)
This formula worked well and all I had to do was copy it to 17 other reports adjacent to each other and change name of the column that I want to find its average. Obviously this is very time consuming. Also the rows template are not always the same.
I have written a some code that recreates the template for me based on the number of names in the row. Everything is working fine. The only problem is how to write the formula above in VBA. I already have the names stored in separate arrays.
View 3 Replies
View Related
Aug 5, 2009
I want to get the average of numerical values in 3 ranges , eg A2:A15, A20:A30, A35:A45, ">0". The intervening cells contain other data, so the ranges are not contiguous. I think AVERAGEIFS is the function to use.
I have found my way through nested IF and other functions so am reasonable able to trouble shoot a function .
View 3 Replies
View Related
Dec 4, 2008
I can't seem to get the OR( operator to work in conjunction with AVERAGEIFS(. In the example below, Quality is the name of the table and Call Rating is my average range. Quality[Manager] is Criteria 1 range and I would like it to use only Manager 1 and Manager 3.
=AVERAGEIFS(Quality[Call Rating],Quality[Manager],OR("=Manager1","=Manager3"))
I thought that an OR( operator would work perfectly, but no matter how I vary the syntax it always give me a DIV/0 error.
View 9 Replies
View Related
Aug 11, 2014
I've been trying to use the averageifs formula to determine the aveage FTE needed for 1st, 2nd, 3rd, 4th and years beyond for different client types. Column A displays the client type, Column B the number of years live and Column C is I've come up with the following formula but I can't seem to get it to work right.
=AVERAGEIFS(C2:C16,A2:A16,"C",B2:B16,">=0",B2:B16,"<1")
ClientYearsFTE
C3.612.49
P-0.00
P4.610.16
M0.940.00
M3.280.57
P0.940.00
C-0.06
C3.610.51
C3.450.29
P3.124.18
C4.121.58
C5.371.25
M4.120.63
P7.290.36
M2.611.27
View 3 Replies
View Related
Jan 18, 2014
I have large data sheets were I need to calculate the average value only for certain team members performing certain service call types. There are several different teams involved. The results need to be displayed in a interactive dashboard were the user can choose the team to see that teams result.
So I need to build a formula that uses a named range that contains a list of team members. I don't want to use named ranges in the data sheet itself.
The data sheet has one row for each service call.
-Column A has the team member ie: 20TE01, 20TE15, 20TE78 ect ect.
-Column B has the service call type ie:, M, A, S, O, ect, ect.
-Column C has the value I need to average.
Named Range is "teamA" contains 20TE01 and 20TE15 as an example
I can use this to count the call type "M" by team as an example =SUMPRODUCT(COUNTIFS(A:A,teama,B:B,"M"))
What formula will provide me the average of a particular call type by team?
View 4 Replies
View Related
May 5, 2014
I am using the following formula and it is working fine. Is there a better way to do so?
=IFERROR(AVERAGEIFS(INDIRECT("Data!$U"&$B$1&":$U"&$A$1),INDIRECT("Data!$A"&$B$1&":$A"&$A$1),">="&D$4,INDIRECT("Data!$A"&$B$1&":$A"&$A$1),"<="&D$5,INDIRECT("Data!$U"&$B$1&":$U"&$A$1),"<>0"),"-")
I am looking for a better way as I have to replicate the same formula in 100 columns and in 60 rows. Where every row use a different target column (like the above mentioned is using column U.
Indirect function gets the values from A1 and B1 cells (Start and end of column because end value keeps changing with data updates)
AverageIfs get average of a particular value between two dates mentioned on top.
View 2 Replies
View Related
Oct 25, 2008
How to compute the realised Profit or Loss for each of the shares transacted for the year ended 31 December 2008 based on average cost of each share.
using AVERAGEIF, if appropriate. [Pls refer to the attachment.]
View 14 Replies
View Related
Nov 27, 2012
Using Office 2010, I am trying to do a averageifs formula for a specified date range. I can get it working by specifying the date range in the formula itself, however when "pointing" the formula to a specific cell with a date in it, the formula gives me a div/0 error.
Formula that works is:
=AVERAGEIFS('UHP Weld Data'!M:M,'UHP Weld Data'!B:B,"08/29/2012")
What I need is a version of: (currently not working)
=AVERAGEIFS('UHP Weld Data'!M:M,'UHP Weld Data'!B:B,"H1")
The date range will constantly change as I want it to show me the past 30 days only.
View 1 Replies
View Related
Jan 8, 2012
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
View 4 Replies
View Related
Sep 28, 2006
I'm trying to use a countif formula with a named reference but the formula is not calculated correctly. My example would be: countif(A1:A5,<max) with max being the named reference. I also tried various options using quotes around the named reference (ex. "<max") but that doesn't work either
View 3 Replies
View Related
Dec 5, 2013
I am trying to use the AVERAGEIF function to give calculate averages based on dynamic data. The formula I want to work is:
[Code].....
but this returns the "#DIV/0!" error.
However,
[Code] ....
returns the correct value.
I want to be able to calculate averages of only the cells that are greater than the value of cell D6. Is there a way to do this?
View 3 Replies
View Related
Mar 11, 2009
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies
View Related
Feb 15, 2010
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
View 14 Replies
View Related
Jul 20, 2014
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
View 2 Replies
View Related
Apr 25, 2014
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies
View Related
Jun 11, 2014
I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
View 2 Replies
View Related
Jun 11, 2008
I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.
View 9 Replies
View Related
Aug 14, 2006
I have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
View 3 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Jun 19, 2008
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
View 9 Replies
View Related
Dec 2, 2009
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies
View Related
Feb 5, 2010
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies
View Related
