How To Arrange Data Range Into New Table Based On Multiple Criteria
Aug 27, 2012
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
I have a set of data (assume 2 columns, one with a long name and the second with a time). The names contain variables that must be used as criteria (a single entry may contain "Blue" and "On"/"Off") and times vary, based on when the Name turns "On" or "Off" [in minutes: 25 (On), 47 (Off), 89 (On), 100 (Off) and 137 (On)]. I need to create another table that automatically inserts values for all times, to include the missing times (0 min thru 24 and 26 thru 46, etc.). EX: If the first entry is "Blue-On" at "25 minutes", the cells from 0 minutes to 24 minutes are each "0" and become a "1" at 25 minutes - the following cells are "1" until 47 minutes (where it is turned off). (1 and 0 represent "On" and "Off", respectively)
How can I created a formula to insert the correct numbers into the correct places? I'm willing to have multiple cells with formulas and simply hide the columns that are doing the calculations.
How do I rearrange the data columns in a pivot table? I have a table with year to date months, open PO's, & budget numbers, but I'd like to change the order in which they show up in the pivot table.
In the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
I am attempting to populate multiple rows in one column with data from another table. I need to get the correct street address using multiple values, i.e. first name, last name and city, as some of the names double up.
Is there a way to do this? I have pasted below an example of what I need done as reference.
I've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
I track distribution using 1 workbook for each sales rep. Each workbook has a separate worksheet (scorecard) for each of their locations showing which of our products are used in that location, for various functions. Each of the locations has a segment (bar, nightclub, casual dining, etc.), and a class (AA, A, B, etc.). All of the scorecards are identical, and are in the same file folder on our shared drive.
Sample:
Location A Class:AA Segment: Sports Bar Rep: John Smith
Product: Product X Product Y Product Z Well: 1 0 0 Back Bar: 0 1 0 Cocktail Menu: 0 1 1
I was unable to find an HTML maker so this is not an actual sample but what I'm looking at. The above data indicates that for location A (Sports Bar, Class AA), Product X is used as the well, Product Y is on their back bar and their cocktail menu, and Product Z is not used at this location at all.
I need to set up an analytic workbook where I can sum data based on multiple and grouped criteria, and for multiple reps ie- display a scorecard that shows totals for nightclubs and sports bars, class AA, A, and B, for a particular rep; OR display a scorecard that shows totals for nightclubs, class A for a group of reps. Ideally I would like to do this using drop down menus that allow the user to select multiple criteria in each of the drop downs, having the data auto-populate based on those selections.
I want to write a VBA code, so I can apply dates criterias to my pivot table. Say, I have 1-Dec-2007 in "C2" and 10-Dec-2007 in "C3". Now I want my pivot table to show me the dates between those two dates and the data that goes along with it. I have written this code, but it keep debugging:
Sub FilterDates()
Application. ScreenUpdating = False
Sheets("PnL").Select
Sheets("PnL").PivotTables("PivotTable3").PivotFields("Date") _ .PivotItems("01/01/1950").Visible = True 'to always have 1 populated
I'm trying to calculate a multi-variable equation based off of data in a table with different criteria. If you reference the attached spreadsheet I am trying to calculate cost based on weight and zone. For the data entered in cells B1 and B2 944.01 would be the cost. If you look at the table in G2:N3 you'll notice that the values in G2 and G3 are the weight limits G2 is from 0-4999 and G3 is 5000+, this should impact where the value in B1 falls. B2 should select from H1 to N1.
The below code is working for >200702 and removes all years/months prior to this entered value. Unfortunately the code does not work when a user enters <200706, instead the code goes through to the “NonValidCriteria” prompt.
Sub HideByCriteriaYYYYMM() 'Declare variables 'SEE: [url] 'SEE: [url] Dim pt As PivotTable, pi As PivotItem Dim lMonth As Long Dim strCri As String, strCri1 As String, strCri2 As String Dim bHide As Boolean Dim xlCalc As XlCalculation
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
I have a need to add or delete rows from a number of known sheet names using a table of variables on another sheet that tell me the start row of the sheet I need to go to and the number of rows I need to either add (ie copy rows and paste / insert these) or delete (delete rows).
There are multiple blocks of data I mey need to amend on each sheet and the values in my table of variables will change on each iteration (ie if I delete rows from the first block on a sheet, the start row for the 2nd block I need to amend will need to be updated in the table of variables before I can edit the 2nd block on that sheet).
I have been able to get the process to work for a single instance (ie one sheet and amendments to the first block of that sheet) but I can't figure out how to create the loop to elegantly move to the next set of variables and repeat the process for the 2nd, 3rd, 4th block etc on the first sheet and then move to the 2nd sheet to repeat the process etc.
Public Sub EditCurrentBlock() Dim rowcount As Integer Dim startrow As Integer Dim endrow As Integer Dim rowcountBal As Integer 'Dim selSheet As Worksheet (tried to use this to nominate the sheet variable but ' had problems so scrapped it)
'Reconfigure the GP Revenue block.................
I need to remove any rows containing "EEE" in the size column.
I also need to remove any discontinued ("D" in the "Type" column)styles that are currently not in inventory. For example 05-5490 does not have any available in either width "D" or "EW" and should be removed; however, 28-112 does have stock and should remain in the spreadsheet. Anything with an "F" in the "Type" column should be left alone.
I have a worksheet with several columns of data that I have to summarize elsewhere on the sheet. Here are the columns:
ID Status Joined Name
Name can take on 4 possible values. For each value in Name, I want to count the number of cells in a column that fit certain criteria. Here are the counts I want to make:
Status OK: Status is a date. Joined OK: Status is a date and Joined is a "1".
There are going to be about 500 records to count. I've already implemented these counts in a Windows scripting language that interfaces with Excel, but I know there must be a more direct and faster way to do it entirely in Excel, whether with VBA or writing functions into cells.
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row Module 1Medication Management Module 2Privacy Module 3Process Module 4Patient Safety Module 5Medical Records Module 6Infection Control Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
I have a few people all entering in data into excel, since they cannot be all in one sheet they each have their own copy. I would like to be able to extract all data where column P reads "Red" from each users spreadsheet and then delete the corresponding lines from their spreadsheet (end of day activity)
The Sheets will be named FDEntryU1AM.xlsm FDEntryU2AM.xlsm FDEntryU3AM.xlsm FDEntryU4AM.xlsm
[Code] .......
I will then need to do the same in another workbook for all items Labeled Blue, but that of course will be same code with just an item replaced.
The idea is after they close up the person overseeing the data can import all at once and leave the users with fresh empty workbooks.
I have a list of several ranges defined in vba, and i am trying to find which range a cell containing word is in excel. Im am looking for help for a good way of doing this. For an example: Say I have 2 ranges defined, the first range corresponds to column A, the second to column B (just an example). The word "Dog" is written in cell B15. I want to find out in vba what range "Dog" is in. I would like some vba code to check and find either if it in a given range (boolean) or a way of checking a list of ranges and returning which it is in. The word will only appear once on the spreadsheet. I have played around with the find command (A=range.find(Pl), then check if A exists) but i havent had any luck (I get an 'Object variable or With block variable not set) I tried searching for a while, but was having trouble finding something related to what i am trying to do.
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
I have data and after doing some data manipulation it looks like this
Job # Part # Lot # Total Grand Total
[Code]..
What I'm trying to do is making a summary sheet that has only the first record with unique values using the Job number, part number, and lot number as the criteria. The grand total in the first record is the total for all of that job,part,lot so i need to bring that value over to the sheet as well. I have been able to do this easily with the duplicate finder, but need a formula to automatically do this.
Want to be able to select data from Column C (3 data validations/drop down menus) and have the corresponding values display in the appropriate fields in column H. Not sure if this is possible?
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories Column 2 Lists the Machine Column 3 Lists the Part Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
I working on a macro that re-arrange a table, but can not find the code. In the attached file, my original data are on the Sheet1. I would like a macro that create as many sheet as there are different values in Column D and rename each sheets by that value.
My main objective is speed and automatization in the competition organization.
Im almost finishing it but now im stuck in this situation:
I have a table with 13 cells
A: athlete name B: athlete weight C: random number (raffle) and then from 1 to 10 is the final Groups.
E.g
Name Weight No 1 2 3 4 5 6 7
[code].....
Now i need to create a macro to display the itens in the groups when the weighing is finished...
E.g
Name Weight No 1 2 3 4 5 6 7 8 9
[code].....
The conditions are:
The numbers should be displayed in the athletes groups
The difference between all the athletes weights shouldn't be > 3 kilos If theres is more than 5 athletes per group the heaviest should go to next athletes group and pop up one message informing that maximum athletes per group was reached...
